Canon CCTV Cameras(3)
This PTZ camera has outstanding zoom capacity to capture every detail. With a 26x Canon telephoto lens and 400K CCD sensor, the VC-50i produces extremely detailed images, making this camera ideal for high level surveillance monitoring where accuracy and precision are essential. For ceiling installation, a reverse-mount model (VC-C50iR) is also available.The camera delivers colour images even when operating in very dim light conditions – as low as 1 lux – thanks to a bright f/1.6 lens and a slow shutter speed. A monochrome image can be produced in total darkness, using the IR Night Mode. The integral LED illuminator provides a viewing range of up to 3 metres, and additional infrared lighting can be used to extend the viewing range still further. The VC-C50i includes a PTZ mechanism with a wide 200° pan and 120° tilt range, and the VC-C50iR provides an extended 340° pan and 100° tilt range, but is otherwise identical. Both models have 9 preset positions, for install recall of camera angle and zoom settings.A cascade facility allows up to 9 cameras to be connected together, via the RS-232C interface, and these cameras are fully compatible with Canon’s VB150 Camera Server. An Infrared remote control handset is also available, allowing an operator to control the PTZ functions locally.Pan/Tilt/Zoom camera with 9 pre-set positions 26x Optical Zoom with powered telephoto lens Superior performance in low-light conditions Built-in Infrared illuminator Easy set up and advanced connectivity Cascade control facility for up to 9 camerasAdd to Compare
High optical performanceWith the ultra-wide 100° horizontal viewing field, 3x zoom and F1.2 brightness the VB-M700F is ideal for capturing high-resolution images. Equipped with an electronic rear focus zoom system the images stay in focus whilst zooming. Using the Canon DIGIC NET processing and day/night IR cut filter, it excels in low lighting conditions, capturing colour images as low as 0.25 lux and in monochrome night mode as low as 0.008 lux.High quality videoDIGIC NET, which also features Smart Shade Control, allows simultaneous, high-resolution Motion JPEG and H.264 video streaming at up to 30fps at 1.3MP (1280x960). H.264 compression format combines high quality and high compression rates ensuring low network and storage load.Intelligent features The VB-M700F has four embedded video content analytic functions that are able to detect camera tampering, identify moved objects, removed objects and abandoned objects. Sound detection allows the camera to detect changes in volume. Detection functions can be set to activate recording and uploading to a server or email notification. With the privacy mask function it is possible to block confidential zones. ONVIF compatibility The device supports the communication protocol ONVIF V1.02 making it compatible with other 3rd party ONVIF-compliant equipment. Easy installation Its operating temperature range, from -10°C and 50°C, makes the VB-M700F ideal for indoor and outdoor surveillance. Fully compatible with an outdoor housing, the protective lens plate can be removed by one screw, avoiding dual lens layers to maintain image quality. The camera supports power over Ethernet and conventional power. Configuring the camera is easy by using the admin tools onboard the camera.Add to Compare
Browse CCTV Cameras
- Auto Iris
CCTV camera products updated recently
The healthcare sector is a crucial part of a functioning society as it provides life-saving care and reassurance to the population. A key part of ensuring the professionals in this industry have the best work environment is the ongoing security of the facilities. Overcoming environmental challenges Hospitals are challenging environments for security integrators. There is little room for mistakes because staff, patients and assets cannot be compromised. Medical centres and their facilities can be vast complexes and security teams must be confident in their ability to identify and nullify threats as soon as possible. Chubb provided Queensland Children’s Hospital's security team with a simple and easy-to-use tool Chubb Fire & Security offers a range of intelligent video and access control systems to solve these challenges. The Queensland Children’s Hospital in Australia, formerly named Lady Cilento Children’s Hospital, is the major specialist children’s hospital for families living in Queensland and Northern New South Wales. The facility not only provides care to the local families but also the state’s sickest and most critically injured children who need highly specialised care. This state-of-the-art hospital, coupled with a leading academic and research facility and the high calibre staff, provides a platform to continue to develop as a leader in paediatric health care, education and research. Comprehensive security solution Chubb developed a solution for Queensland Children’s Hospital that included access control, video management, communications and asset tracking. By creating a common infrastructure for all security systems managed through a comprehensive user interface, Chubb provided the hospital’s security team with a simple and easy-to-use tool that enables them to resolve situations as they happen and action events automatically on command. Chubb also developed a 3D model of the building that allows the security team to respond quickly to a wide variety of events. The protection of patients and staff is naturally a hospital's number one priority Also crucial to the implementation of security systems in a hospital is minimal disruption to its everyday operations. Professionals in hospitals are working 24/7 so there is little time when it comes to disabling security systems for maintenance or repairs. Continued maintenance and upgrades are vital elements to Chubb’s work and key to this is a great deal of collaboration with clinical and operational stakeholders. Securing mission-critical environment Hospital facilities are not always state-of-the-art and often face the slow upgrade process that a limited budget imparts. However, through the audit and update of security systems, steps can be taken to ensure continued operations without external disruption. The protection of patients and staff is naturally a hospital's number one priority and Chubb shares the same commitment to making sure the environment is safe and secure. Carrying out a technically demanding project in a large, mission-critical environment like a hospital takes strong teamwork, including expert strategic partners, and collaboration between stakeholders.
In 2017, IoT-based cyberattacks increased by 600%. As the industry moves towards the mass adoption of interconnected physical security devices, end users have found a plethora of advantages, broadening the scope of traditional video surveillance solutions beyond simple safety measures. Thanks in part to these recent advancements, our physical solutions are at a higher risk than ever before. With today’s ever evolving digital landscape and the increasing complexity of physical and cyber-attacks, it’s imperative to take specific precautions to combat these threats. Video surveillance systems Cybersecurity is not usually the first concern to come to mind When you think of a video surveillance system, cybersecurity is not usually the first concern to come to mind, since digital threats are usually thought of as separate from physical security. Unfortunately, these two are becoming increasingly intertwined as intruders continue to use inventive methods in order to access an organisation's assets. Hacks and data breaches are among the top cyber concerns, but many overlook the fact that weak cybersecurity practices can lead to physical danger as well. Organisations that deploy video surveillance devices paired with advanced analytics programs often leave themselves vulnerable to a breach without even realising it. While they may be intelligent, IoT devices are soft targets that cybercriminals and hackers can easily exploit, crippling a physical security system from the inside out. Physical security manufacturers Whether looking to simply gain access to internal data, or paralyse a system prior to a physical attack, allowing hackers easy access to surveillance systems can only end poorly. In order to stay competitive, manufacturers within the security industry are trading in their traditional analogue technology and moving towards interconnected devices. Due to this, security can no longer be solely focused on the physical elements and end users have taken note. The first step towards more secured solutions starts with physical security manufacturers choosing to make cybersecurity a priority for all products, from endpoint to edge and beyond. Gone are the days of end users underestimating the importance of reliability within their solutions. Manufacturers that choose to invest time and research into the development of cyber-hardening will be ahead of the curve and an asset to all. Wireless communication systems Integrators also become complicit in any issues that may arise in the future Aside from simply making the commitment to improve cyber hygiene, there are solid steps that manufacturers can take. One simple action is incorporating tools and features into devices that allow end users to more easily configure their cyber protection settings. Similarly, working with a third party to perform penetration testing on products can help to ensure the backend security of IoT devices. This gives customers peace of mind and manufacturers a competitive edge. While deficient cybersecurity standards can reflect poorly on manufacturers by installing vulnerable devices on a network, integrators also become complicit in any issues that may arise in the future. Just last year, ADT was forced to settle a $16 million class action lawsuit when the company installed an unencrypted wireless communication system that rendered an organisation open to hacks. Cybersecurity services In addition, we’ve all heard of the bans, taxes and tariffs the U.S. government has recently put on certain manufacturers, depending on their country of origin and cybersecurity practices. Lawsuits aside, employing proper cybersecurity standards can give integrators a competitive advantage. With the proliferation of hacks, malware, and ransomware, integrators that can ease their client's cyber-woes are already a step ahead. By choosing to work with cybersecurity-focused manufacturers who provide clients with vulnerability testing and educate end users on best practices, integrators can not only thrive but find new sources of RMR. Education, collaboration and participation are three pillars when tackling cybersecurity from all angles. For dealers and integrators who have yet to add cybersecurity services to their business portfolios, scouting out a strategic IT partner could be the answer. Unlocking countless opportunities Becoming educated on the topic of cybersecurity and its importance for an organisation is the first step Physical security integrators who feel uncomfortable diving headfirst into the digital realm may find that strategically aligning themselves with an IT or cyber firm will unlock countless opportunities. By opening the door to a partnership with an IT-focused firm, integrators receive the benefit of cybersecurity insight on future projects and a new source of RMR through continued consulting with current customers. In exchange, the IT firm gains a new source of clients in an industry otherwise untapped. This is a win for all those involved. While manufacturers, dealers and integrators play a large part in the cybersecurity of physical systems, end users also play a crucial role. Becoming educated on the topic of cybersecurity and its importance for an organisation is the first step. Commonplace cybersecurity standards Below is a list of commonplace cybersecurity standards that all organisations should work to implement for the protection of their own video surveillance solutions: Always keep camera firmware up to date for the latest cyber protections. Change default passwords, especially those of admins, to keep the system locked to outside users. Create different user groups with separate rights to ensure all users have only the permissions they need. Set an encryption key for surveillance recordings to safeguard footage against intruders and prevent hackers from accessing a system through a backdoor. Enable notifications, whether for error codes or storage failures, to keep up to date with all systems happenings. Create/configure an OpenVPN connection for secured remote access. Check the web server log on a regular basis to see who is accessing the system. Ensure that web crawling is forbidden to prevent images or data found on your device from being made searchable. Avoid exposing devices to the internet unless strictly necessary to reduce the risk of attacks.
Where are video surveillance cameras headed? At the core of next-generation Internet Protocol (IP) cameras are advanced chips with artificial intelligence (AI) at the edge, enabling cameras to gather valuable information about an incident: scanning shoppers at a department store, monitoring city streets, or checking on an elderly loved one at home. Thanks to advanced chip technology, complex analytics operations are becoming more affordable across the full spectrum of surveillance cameras —professional to consumer — fueling the democratisation of AI in the IP camera market. Complex analytics operations are becoming more affordable across the full spectrum of surveillance cameras Expanding the global IP camera market The video surveillance equipment market grew to $18.5 billion in 2018 and is expected to increase this year, according to IHS Markit. The latest research points to video everywhere, edge computing, and AI as the top technologies that will have a major impact in both commercial and consumer markets in 2019. Computing at the edge means that the processors inside the camera are powerful enough to run AI processing locally, while still encoding and streaming video, and are able to do it all at the low-power required to fit into the limited thermal budget of an IP camera. New SoC chips will be able to perform all of the processing on camera and provide accurate AI information, with no need to send data to a server or the cloud for processing. Instead, data can be analysed right in the camera itself, offering high performance, real-time video analytics, and lower latency — all critical aspects of video surveillance. This new AI paradigm is made possible by a new generation of SoCs, a key driver behind the market growth of IP cameras. Complex analytics operations are becoming more affordable across the full spectrum of surveillance cameras to fuel the advent of AI in the IP camera market Micro-processor-enabled video analytics Next-generation video cameras will be able to create heat maps of stores to see where people spend the most time Microprocessor-enabled analytics allow users to more easily extract valuable data from video streams. How about an insider’s view into retail customer behavior? Consider video cameras at a department store, monitoring shoppers’ behavior, traffic patterns, and areas of interest. Next-generation cameras will recognise how long a shopper stays in front of a specific display, if the shopper leaves and returns, and if the shopper ultimately makes a purchase. Next-generation video cameras will be able to create heat maps of stores to see where people spend the most time, so retailers will be able to adjust product placement accordingly. Analytics will also help identify busy/quiet times of the day, so retailers can staff accordingly. By understanding customers’ behavior, retailers can determine the best way to interact with them, target specific campaigns, and tailor ads for them. Cue the coupons while the shopper is still onsite! Analytics will also help identify busy/quiet times of the day, so retailers can staff accordingly Fast processing for rapid response at city level City surveillance and smart cities are depending on advanced video surveillance and intelligence to keep an eye on people and vehicles, identify criminals, flag suspicious behavior, and identify potentially dangerous situations such as loitering, big crowds forming, or cars driving the wrong way.Quick local decisions on the video cameras are also used to help analyse traffic situations Quick local decisions on the video cameras are also used to help analyse traffic situations, adjust traffic lights, identify license plates, automatically charge cars for parking, find a missing car across a city, or create live and accurate traffic maps. Real-time HD video monitoring and recording When it comes to home monitoring, what will next-generation video surveillance cameras offer? Real-time monitoring and notification can detect if a person is in the back yard or approaching the door, if there’s a suspicious vehicle in the driveway, or if a package is being delivered (or stolen). Advanced video cameras can determine when notifications are and aren’t required, since users don’t want to be notified for false alerts such as rain, tree branches moving, bugs, etc. Next-generation video camera capabilities can also help monitor a loved one, person or pet, helping put families at ease if they are at work or on vacation. For example, helpful analytics may be used to detect if someone has fallen, hasn’t moved for a while, or does not appear for breakfast according to their typical schedule. City surveillance and smart cities are depending on advanced video surveillance and intelligence to keep an eye on people and vehicles, identify criminals, flag suspicious behavior, and identify potentially dangerous situations Next-gen IP cameras When evaluating next-generation IP cameras (cameras on the edge), look at the brains. These cameras will likely be powered by next-generation SoCs chips. Here is what this means to you: Save on network bandwidth, cloud computing and storage costs. There is no need to constantly upload videos to a server for analysis. Analysis can be performed locally on the camera, with only relevant videos being uploaded. Faster reaction time. Decisions are made locally, with no network latency. This is critical if you need to sound an alarm on a specific event. Privacy. In the most extreme cases, no video needs to leave the camera. Only metadata needs to be sent to the cloud or server. For example, the faces of people can be recognised in the camera and acted upon, but the video never reaches the cloud. The cameras can just stream a description of the scene to the server “suspicious person with a red sweater walking in front of the train station, has been loitering for the last 10 minutes, suggest sending an agent to check it out.” This could become a requirement in some EU countries with GDPR rules. Easier search. Instead of having to look through hours of video content, the server can just store/analyse the metadata, and easily perform searches such as “find all people with a red sweater who stayed more than five minutes in front of the train station today.” Flexibility/personalisation. Each camera at the edge can be personalised to work better for the specific scene it is looking at, compared to a generic server. For example, “run a heat map algorithm on camera A (retail) as I want to know which sections of my store get the most traffic; and run a license plate recogniser on camera B (parking lot) as I want to be able to track the cars going in/out of my parking lot.” No cloud computing required. For cameras in remote locations or with limited network bandwidth, users have the ability to perform all analytics locally, without relying on uploading video to a server/cloud. Higher resolution/quality. When AI processing is performed locally, the full resolution of the sensor can be used (up to 4K or more), while typically the video streamed to a server will be lower resolution, 1080p or less. This means more pixels are available locally for the AI engine so that you will be able to detect a face from a higher distance than when the video is streamed off camera. AI at the edge Professional-level IP cameras capable of performing AI at the edge are coming soon with early offerings making their debut at this year’s ISC West. As we enter 2020, we will begin to see the availability of consumer-level cameras enabling real-time video analytics at the edge for home use. With rapid technology advancement and increased customer demand, AI is on the verge of exploding. When it comes to image quality and video analytics, IP cameras now in development will create a next-generation impact at department stores, above city streets, and keeping an eye on our loved ones.
nuPSYS—a pioneer in Internet of Things (IoT) solutions for physical security, infrastructure, and networks—is pleased to announce its 3D-Advanced Mapping integrated with the Milestone-Canon Video Management System as a plug-&-play 3D-plugin, which was shown live at Intersec 2019. nuSIM is a visual 3D-mapping solution that allows assets, cameras, sensors, alarms, partitions, and critical points to be accurately plotted onto a 3D mapping surface. This integration will enable operators to graphically view multilayer live video overlays within the Milestone-Canon VMS user interface. Key features include: 3D advanced mapping Integrated 3D view 3D representation of assets, cameras, sensors, & access control Generates a real-perspective view for operators – enhances efficiency manifold Interactive and dynamic operations Pragmatic 3D virtual presence Customisation dashboard per use case Dashboard provides simultaneous 3D view, streaming view and sensor view CONTEXT AWARE: immersed in the 3D physical environment SCALE: Single light pole (or single smart infrastructure) to a full smart city-scape SPEED: Real-time KPI IMPROVEMENTS: Enhanced efficiencies compared to maps and icons overlay nuPSYS' 3D-Advanced Mapping functionality provides system operators with a unique experience for viewing video and managing devices within the Milestone-Canon Video Management System. Operators can navigate to see cameras and sensors using a 3D model of the facility and grounds, providing a unique simple-to-deploy 3D-plugin for Milestone-Canon VMS.
Agent Video Intelligence (Agent Vi), a global provider of video analytics solutions, has announced the signing of a Value-Added Distributor (VAD) agreement with Canon Marketing Japan, the marketer and provider of Canon Inc. products and solutions in Japan. Canon Marketing Japan will operate as a VAD throughout Japan for Agent Vi’s savVi on-premise video analytics platform, which features real-time event detection, video search and business intelligence applications. Already representing other leading vendors in the Japanese market, Canon Marketing Japan will be able to offer a best-in-class solution by combining savVi video analytics, Axis Communications IP cameras, and the Milestone XProtect video management system (VMS). Agent Vi’s savVi video analytics platformEnd-users will benefit from automated video analysis tools to get the most out of their video" savVi allows users to achieve optimal value from their video surveillance networks by automating video analysis to detect and alert for events of interest, expedite search in recorded video and extract statistical data from the footage captured by surveillance cameras. Mr. Ariel Frischoff, VP Sales EMEA & APAC, Agent Vi, said, “It’s our honour to be working with an illustrious partner like Canon Marketing Japan. Adding Agent Vi’s comprehensive video analytics capabilities to their current offering will allow Canon Marketing Japan to promote an end-to-end solution that suits a wide range of vertical markets. End-users will benefit from automated video analysis tools that really leverage the surveillance system to get the most out of their video.” “Canon Marketing Japan is excited about establishing a partnership with Agent Vi, which is a leading global provider of video analysis solutions, and about adding savVi to our portfolio,” said Koichi Mikami, Vice President and Group Executive for Visual Solutions Headquarters for Canon Marketing Japan. “We believe savVi can be offered to various industries and meet various customers’ needs. Having such a comprehensive portfolio of video analysis capabilities enables us to provide more innovative solutions to end-users.”
Canon Europe, a provider of imaging solutions, has announced the launch of the ME20F-SHN, a low light network camera with remarkable performance. As a sister product to the ME20F-SH, the ME20F-SHN, which now features network capability, further enhances Canon’s Multiple Purpose camera line-up with a solid proposition in producing full colour and Full HD resolution images in limited light scenarios. Perfect for critical surveillance operations, the ME20F-SHN packs incredible low light performance, network capability and built-in video analytics into a lightweight and compact body. Incredible low-light performance Equipped with a 2.26MP Full Frame 35mm CMOS sensor and DIGIC DV 4 processor, the ME20F-SHN delivers sharp, low noise, Full HD colour video in extreme low light conditions. The sensor’s pixels and readout circuitry use Canon’s proprietary technologies to achieve both reduced noise and exceptionally high sensitivity. With a maximum ISO in excess of 4 million (+75db), which delivers amazing low-light sensitivity, the ME20F-SHN can capture subjects illuminated with less than 0.0005 lux. Even greater detail can be captured in low-light environments by removing the IR cut filter when shooting in infrared mode. Much like Canon’s Cinema EOS range, this network camera offers Canon Log and Wide DR from the Custom Picture menu, which enables a wide dynamic range of up to 12 Stops (800%), delivering high-quality images across a range of lighting scenarios. The Custom Picture menu has been upgraded, with the addition of the Crisp Img function, which obtains sharp images in well-lit environments and low noise image under low light conditions. These features are invaluable for users needing to capture clear and accurate images. The ME20F-SHN packs low light performance, network capability and built-in video analytics into a lightweight and compact body Enhanced network capability Featuring Ethernet, 3G/HD-SDI and HDMI ports, the ME20F-SHN caters for a plethora of video outputs based on users’ application requirements. For local monitoring, the ME20F-SHN has 3G/HD-SDI and HDMI ports; while an Ethernet connection enables remote operation of camera settings, monitoring and recording via web browsers, mobile devices or other video management software. The microSD card slot supports record and playback directly from a microSD card. For unmanned and cost-efficient surveillance, the 6 built-in video analytics functions and Alarm I/O interface enables automated recording and output to external devices triggered by video motion detection and alarm input. With the Area-specific Data Size Reduction (ADSR) function, the ME20F-SHN enables users to capture absolute detail in selected areas of interest while reducing bit-rates in the other areas of the image to save network bandwidth. For ease of integration into existing video surveillance systems, the ME20F-SHN supports a wide range of video management software through Canon WebView and ONVIF protocols. Flexible installation capabilities Operators can select the ideal lens for each shooting and equipment scenario, taking aspects such as angle of view and level of brightness into account. Featuring an EF mount with Cinema Lock, the ME20F-SHN is compatible with a broad range of lenses across the Canon line-up, including zooms, primes and selected Cine Servo lenses for greater control. With PoE+ support, the data transmission via Ethernet and power supply are provided with a single LAN cable, which facilitates simple and rapid installation of the camera. The compact body and lightweight design are invaluable for users needing both a fixed and portable camera. ME20F-SHN key features Sharp, low noise colour video in extreme low light Network capable remote configuration and monitoring Supports a wide range of surveillance applications High-quality Full HD output Flexible installation
Three reasons for adopting open architecture access control solutionsDownload
5 steps to finding the right access control system for youDownload
Why outdated access control systems are a big problemDownload
- Gallagher secures Wellington City Council with its Command Centre central management platform
- Siklu’s radios deployed in the City of Cambridge to provide outdoor video security
- Bosch safeguards Basingstoke and Deane Borough Council with its DICENTIS conference system
- Kutch manufacturing firm eliminates data spoofing with Matrix Weighbridge integration solution