eneo CCTV Cables & Cable Assemblies (9)
Browse CCTV Cables & Cable Assemblies
Cable & cable assembly products updated recently
For decades, cable theft has caused disruption to infrastructure across South Africa, and an issue that permeates the whole supply chain. Here, Ian Loudon, international sales and marketing manager at remote monitoring specialist Omniflex, explains how new cable-alarm technology is making life difficult for criminals and giving hope to businesses. In November 2020, Nasdaq reported that, “When South Africa shut large parts of its economy and transport network during its COVID-19 lockdown, organised, sometimes armed, gangs moved into its crumbling stations to steal the valuable copper from the lines. Now, more than two months after that lockdown ended, the commuter rail system, relied on by millions of commuters, is barely operational.” Private security firm Despite this most recent incident, cable theft is not a new phenomenon to sweep South Africa Despite this most recent incident, cable theft is not a new phenomenon to sweep South Africa. In 2001, SABC TV broadcast a story following two members of a private security firm working for Telkom, a major telecoms provider. In the segment, the two guards, working in Amanzimtoti on the south coast of KwaZulu-Natal, head out to investigate a nearby alarm that has been triggered. They reach a telecoms cabinet and discover that it has been compromised, with the copper cable cut and telephone handsets strewn across the ground. In the dark, they continue to search the area when one of the guards discovers the problem: 500 metres of copper wire has been ripped out. In their haste, the thieves have dropped their loot and fled. Widespread cable theft Had they managed to get away, they would have melted the cable to remove the plastic insulation and sold the copper to a local scrap dealer for around 900 Rand, about $50 US dollars. For the company whose infrastructure has been compromised, it may cost ten times that amount to replace and repair the critical infrastructure. The disappointing takeaway from this story is that two decades on from this incident the country still faces widespread cable theft, whether it’s copper cables from mines, pipelines, railways, telecoms or electrical utilities. In fact, the South African Chamber of Commerce and Industry estimates that cable theft costs the economy between R5–7 billion a year. The answer to the problem must go further than the existing measures used by companies. Detect power failure Most businesses already invest in CCTV, fences, barriers and even patrol guards, but this is not enough. Take the mining sector, for example. These sites can be vast, spanning dozens of kilometres - it’s simply not cost effective to install enough fences or employ enough guards or camera operators. As monitoring technology gets better, the company has seen site managers increasingly use cable alarms in recent years that detect when a power failure occurs. The idea is that, if one can detect a power failure, they can detect whether the cable has been cut The idea is that, if one can detect a power failure, they can detect whether the cable has been cut. The problem is though: how does one distinguish the difference between a situation where a cable has been cut intentionally and a genuine power outage? Power outages in South Africa are an ongoing problem, with the country contending with an energy deficit since late 2005, leading to around 6,000 MW of power cuts in 2019. Remote terminal units Eskom Holdings SOC Ltd., the company that generates around 95 per cent of South Africa’s power has already warned of further blackouts as the company works to carry out repairs to its power plants. According to a statement on the company’s website, “Eskom spends in the region of R2 billion a year replacing stolen copper cables." The result is that criminals take advantage of the gaps in power to steal cable, timing their robberies to coincide with the published load shedding schedules. The basic alarms used to detect power outage won’t recognise the theft because they register a false-positive during a power cut. By the time the power comes back on, the deed has been done and the criminals have gotten away with the cable. The good news is that recent breakthroughs in cable monitoring technology are helping tackle just this problem. New alarms on the market now combine sophisticated GSM-based monitoring systems that use battery powered remote terminal units. Legitimate supply chain Unlike the basic alarms that look for the presence or absence of power, these new systems monitor whether the cable circuit is in an open or closed state. In the event of a power outage, the unit continues to run on battery power and can detect if a cable has been cut, sending a priority SMS alert to the site manager immediately, giving them a fighting chance to prevent a robbery in progress. Beyond the opportunistic theft carried out by petty criminals, the theft of copper cables forms a wider problem Beyond the opportunistic theft carried out by petty criminals, the theft of copper cables forms a wider problem across the supply chain in South Africa. In recent years, the combination of unscrupulous scrap dealers, the alleged involvement of large scrap processing companies and lax penalties meant that much of the stolen copper ended up back in the legitimate supply chain. However, recent changes in the law have sought to take a tougher stance on copper theft. Alarm monitoring technology According to the Western Cape Government, “The Criminal Matters Amendment Act, regulates bail and imposes minimum offences for essential infrastructure-related offences." The act, which came into effect in 2018, recommends sentencing for cable theft, with the minimum sentence for first-time offenders being three years and for those who are involved in instigating or causing damage to infrastructure, the maximum sentence is thirty years. It seems to be working too. In January 2021, the South African reported that a Johannesburg man was sentenced to eight years behind bars for cable theft in Turffontein. While the longer-term outlook is a positive one for industry, the best advice for businesses seeking to alleviate the problem of cable theft in the immediate future is to invest in the latest cable-theft alarm monitoring technology to tackle the problem and make life difficult for criminals.
According to IHS Market, it is estimated that there are over 60 million security cameras in the United States, and other reports say these cameras capture more than four billion hours of footage per week. Over the last decade, IP camera technology has dominated the conversation as it has provided users with a broad offering of enhanced image quality and features. With a large percentage of existing security systems relying on analogue, many end users looking for high definition (HD) video quality have been forced to take on a complete system overhaul. Infrastructure overhaul for HD video To make the switch, customers would need to change everything, from cameras to hardware to wiring– not to mention the lengthy installation process that would ensue. IP cameras also require higher Internet speeds and more cloud space. Whether constrained by budget, bandwidth or storage, many end users have been unable to adopt this new video surveillance method.Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike Thanks to technological advancements within the security industry, HD over Coax offers a viable solution for integrators and end users alike. By utilising the current Coaxial cables, this offering yields high definition video, while requiring minimal infrastructure changes and is an optimal surveillance choice for security customers. Plus, with new advancements and updates being made frequently to this technology, there is a solution for every security need. The enhanced alternative of HD over Coax has been warmly welcomed in the security industry, thanks to its simple solutions and ever-evolving features. Many new analogue HD cameras are “plug and play,” able to connect directly to existing Coaxial cables. This eliminates the need for a complete system change, creating cost-savings for the end user and an enhanced video quality offering. Easy solutions for HD video As a result, integrators can cost-effectively upgrade their customer’s surveillance solution while using their legacy infrastructure, making it an attractive option for end users and an easy sell for dealers. Latency in video is another common issue with network-based camera systems, where even the slightest delay in video surveillance can hinder security response HD over Coax cameras themselves are always expanding and evolving to meet a wide array of security needs. With the introduction of fisheye and multi-sensor cameras, users now have a multitude of coverage options, not to mention the introduction of 4K bringing resolution options to the same level as IP. Some newer technologies are even touting 4K cameras paired with 4K digital video recorders (DVRs) made specifically for analogue systems. Longer cables grant transmission for up to 1600 feet, double the distance of standard analogue solutions, and triple that of IP systems. This single cable is able to transmit both HD video and audio. Recently, broadcast quality audio over Coax has become available in limited models, a substantial improvement over older analogue technology, which was unable to transmit audio. Stopping video delay Latency in video is another common issue with network-based camera systems. Even the slightest delay in video surveillance can hinder security response. IP cameras are forced to compress and packetise their video for transmission. The outcome of this is a reduced number of images per video, which in turn causes delay. HD over Coax on the other hand, delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity. Additionally, the point-to-point transmission delivers uncompressed video free of lag. Another touted benefit is that, unlike IP networked cameras, analogue systems provide a more secure video transmission. With so much sensitive information housed on a businesses’ network, adding another point of network access through an IP camera can create concerns for cyber security risks. HD over Coax delivers an unlimited amount of HD images in real time, with smooth motion and impressive clarity Preventing network hacking With HD over Coax, the physical connections between the camera and DVR prevent network hacking. By keeping the video surveillance system offline, security professionals are able to direct their attention to the physical threats at hand, rather than having to focus on deterring cyber security risks. One of the primary difficulties of deploying HD video solutions is the fact that many older systems utilise a wide variety of HD standards and platforms. To make matters more complicated, after HD over Coax was brought to market, manufacturers raced to create their own version of this technology. Today, the most popular proprietary standards are HD-CVI, HD-TVI and AHD. However, integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible.Integrators and customers found that attempting to manage multiple HD technologies proved to be near impossible Diversifying surveillance through one DVR To combat these issues, manufacturers have introduced products with more flexibility to their portfolios. One example of this is the penta-brid DVR which grants the ability to seamlessly integrate multiple technologies deployed across one application. This means that systems with diverse camera brands and technologies, such as a mix of HD-CVI, HD-TVI, AHD, analogue or IP, can be connected through one DVR. For many end users with legacy analogue systems, penta-brid DVRs give them greater freedom to choose between a variety of solutions, rather than being limited to one option. With video resolution increasing, the space needed to store the footage is similarly rising. Penta-brid technology has been able to adapt to these evolving needs, giving users ample storage space to house the HD and 4K surveillance video with some of the newest models including H.265 compression. HD casino surveillance made simple For casinos, HD images are critical for identifying unauthorised personnel and unlawful behaviours to create a safe environment for guests and staff While HD over Coax is beneficial to many end users and integrators, those in the casino and hospitality markets find it crucial. With a combination of high profile guests, large amounts of cash on hand, constant crowds and strict industry regulations, reliable video surveillance is a must. Deploying new IP systems comes at a stiff price. When looking to upgrade their video surveillance, casinos must also be mindful of the installation process. When moving to an IP-based system, ripping out old wires and replacing them with new is the standard practice. This practice can be both disruptive and costly, not to mention gaming regulations require casino activities be monitored at all times so a complete system shutdown would result in revenue loss. This cost can be hard to justify, especially when the current legacy analogue system remains in working condition with only the lower image resolution to date it. For these scenarios, the most cost-effective option is to leverage the legacy infrastructure, replace the existing cameras with new devices, and reap the benefits that HD video has to offer without any lapse in security. For casinos, HD images are critical for identifying unauthorised personnel and unlawful behaviours to create a safe environment for guests and staff. HD over Coax cameras now offer the same resolution as IP cameras with a plug and play approach, that cuts down on expense without sacrificing quality. For businesses and applications that are unable to adopt IP technology, whether it be cost or time prohibitive, HD over Coax now features most of the same benefits IP has to offer without breaking the bank. By providing clear images in real time, maximising existing infrastructure, and affording cyber security benefits, HD over Coax provides an attractive solution for many end users and integrators.
Atlanta’s new $1.5 billion stadium, home to the NFL Atlanta Falcons football team and MLS Atlanta United football club and site of the recent NCAA national college football championship, is protecting fans, personnel and athletes from terrorists and errant drivers from using vehicles as weapons. While the threat of terrorists planning to attack soft targets, such as stadiums increases, stadium security professionals, such as those at the new Mercedes-Benz Stadium, must look for the weak points throughout their facilities to determine where fanatics are most likely assailing. Taking their cue from hard target attacks, they and other stadium management understand that the use of vehicles, either to carry the people that will carry out the attack or act as the bomb itself, is a very real threat. New system, safer pedestrians Installed by Tusco, using Delta Scientific perimeter protection products, the new access system includes four DSC501 barriers, five DSC720 bollards, 39 DSC2000 barriers and 59 DSC680 fixed bollards. “We are very experienced with installing Delta equipment,” relates Brent Martina, President of Tusco. “Mercedes-Benz Stadium was very particular about their security needs and protocols and requested a customised sequence of operations for their security equipment. While the threat of terrorists planning to attack soft targets increases, stadium security professionals must look for the weak points throughout their facilities “Delta Scientific’s products and experienced engineers made them the obvious choice in meeting both the high quality and technical standards required to integrate with the stadium’s sophisticated security system. It was crucial to have a reliable team in place as we received a very compressed schedule to get everything complete by the first football game and, therefore, had no room for errors.” Because of long, straight approaches to some access points, stadiums oftentimes need to deploy high performance barriers. DSC501 barriers were used at main entrances where players and VIPs, among others, enter with their cars. Preventing attacks before they happen The DSC501 is the only K54-certified retractable vehicle barricade in the world. Set in a foundation only 18 inches deep, it will survive and operate after a 5.4-million-foot pound impact. That’s equivalent to a 65,000-pound truck hitting it at 50 mph. Stopping the truck or car dead in its tracks, the DSC501 protects against a “second hit” risk from a second vehicle. The stadium preferred installing these barricades in a more industrial look, wanting them to be “seen.” Five retractable DSC720 bollards were used at the pedestrian entry areas. This is Delta’s highest crash rated bollard, stopping a 15,000-pound vehicle at 50 mph. The bollard will stop and destroy much larger vehicles than those tested at very high velocities. The DSC720 is 35 inches tall and 15 inches wide. At Mercedes-Benz Stadium, the bollards feature brushed stainless-steel sleeves. Oftentimes, the ground below the access points are filled with cables, wires, pipes and other infrastructure products. As a result, typical, below ground installed traffic bollards, barriers and barricades cannot be used because these infrastructure products are too close to the surface. The solution is to use surface-mounted and shallow foundation barricades and barriers. This isn’t the only stadium using Delta equipment to protect staff and attendees from vehicle harm - Levi’s Stadium in San Francisco is a well-known user Delivery entrances are weaknesses At the same time, for some reason, delivery entrances never seem to be as secured as the main entrances to the stadium. With delivery vehicles coming and going, delivery entrances need a solution that lets delivery vehicles enter and exit but stop unauthorised vehicles from entering at all. At the loading docks, 39 of Delta’s fastest, smallest and shallowest foundation barricades were implemented. Chosen especially for high speed applications and ease of installation, the cost effective DSC2000 barrier is K12 crash-certified with no penetration, meaning it will stop a 15,000-pound vehicle traveling 50 mph dead in its tracks. The ten-inch shallow foundation also reduces installation complexity, time, materials and corresponding costs. Lastly, 50 DSC680 shallow foundation fixed bollards with stainless steel sleeves protect pedestrian areas. They secure any unprotected locations where vehicle bombers and errant drivers have no obstacles. Versus cement barriers such as posts and pots, many organisations prefer fixed-post bollards for several reasons. Terrorists typically don't go where they see barricades, so placing them wherever possible attacks can happen reduces security risks dramatically That’s because, when hit, cement posts and pots can explode, literally spreading shrapnel throughout the crowd, potentially creating numerous injuries. Shallow foundation bollards can be installed within sidewalks or on top of concrete deck truss bridges as well as conform to the inclines and turns of a locale. They also meet the 1-metre clearance regulations mandated by the Americans with Disabilities Act (ADA). The fixed bollard, which does not go up and down, provides a significant blocking device solution that continues to challenge security directors faced with threats such as stopping a vehicle from ploughing into the stadium’s inner perimeter. They let a facility manager meet a long-standing challenge - how to easily install bollards on shallow substrates, including those that are not level or have turns. No longer do locations, such as curves on hills, the upper levels of parking structures and other unprotected locales have to rely on unsightly ‘make-do’ solutions to stop car bombers or wayward drivers. One of the world's most secure “Delayed by roof issues, the Mercedes-Benz Stadium challenged us with a condensed schedule to provide one of the world’s most secure vehicle access systems,” avows Martina. “I’m proud to say that our team completed the work on time and walked away from the project with another pleased client.” This isn’t the only stadium using Delta equipment to protect staff and attendees from vehicle harm. Among many, Penn State and Purdue as well as Levi’s Stadium in San Francisco (49ers) are well-known users. Unfortunately, most procurement offices won't allow vendors to announce their purchases. This is too bad since terrorists typically won't go where they know barricades are deployed, reducing security risks dramatically. Leading universities, including six of the Associated Press (AP) top-10 rated 2018 pre-season football schools, also stayed one step ahead of terrorists and errant drivers this year on their campuses by identifying vulnerable areas and securing them within minutes with Delta MP5000 temporary, portable barriers. These mobile deployable vehicle crash barriers carry a K8 rating (M40 ASTM rating), stopping 7.5-ton vehicles traveling 40 mph. Terrorists typically don't go where they see barricades, so placing them wherever possible attacks can happen reduces security risks dramatically. Today, there is little excuse for a major stadium to suffer an attack which uses a vehicle to break through the perimeter. Whatever the weakness a terrorist thinks can be exploited, there is a type of bollard, barricade or barrier to stop him, yet let authorised people through.
Eneo’s high-performance, Candid bullet camera range, with integrated junction box, uses a 2MP and 3MP, 1/2,8" Sony STARVIS CMOS sensor to provide exceptional video quality in low light conditions. Candid bullet cameras There are three Candid bullet cameras in the range with built-in junction boxes. A 2MP, IP bullet (ICB-62M2712M0A) and a 3MP, IP bullet (ICB-73M2712MWA) with the newly-launched, WiFi set-up interface. A 2MP, analogue, multi-signal bullet (MCB-72M2712M0A) completes the range, offering selectable, HD-TVI, AHD, CVI, HD-SDI, EX-SDI and composite video stream options. The eneo, Candid bullet cameras have a rugged, aluminum construction, designed for tough, outdoor applications. They are weather proof-rated to IP67 and come with high-power, integrated IR illumination and a motorised, 2.7mm to 12mm, varifocal lens. They will operate at a temperature of -20°C, but have a built-in, low-energy heater which will extend the IP camera’s temperature range to -50°C and the analogue cameras temperature range to -30°C. Field and motion detection The eneo, Candid bullet camera’s integrated junction box is built in to its wall-mounting bracket. This simplifies, neatens and speeds up installation, allowing cabling from behind, directly into box. Not only does this seal the camera against dust and moisture, but it also means no cabling is visible, reducing the risk of tamper and vandalism. All cameras include onboard, micro-SD card storage; triple streams for recording and viewing; a smartphone-ready, cross web browser for remote set up; and low voltage and PoE supply. The IP cameras’ onboard, analytics include motion detection; tamper protection; trip wire; people counting; direction and field detection; defog; and vertical view. The multi-signal model includes defog, privacy masking and motion detection. Eneo’s new, Candid bullet cameras are available now through eneo’s established, UK distribution channels.
Eneo has added an integrated, compact, junction box to its bullet cameras, in the company’s high-performance Candid range. The junction box is built into the mounting bracket of the camera and removes the need for fitting a separate junction box alongside the cameras. It simplifies, neatens and speeds up fitting, helping to reduce installation costs. Eneo has three Candid bullet cameras available with the integrated junction box. The small Candid, 2MP, IP bullet (ICB-62M2712M0A); the medium sized, 3MP, IP bullet, with the ingenious, newly launched, WiFi set-up interface (ICB-73M2712MWA); and the medium sized Candid 2MP, multi-signal, bullet (MCB-72M2712M0A), which is HD-TVI, AHD, CVI, HD-SDI, EX-SDI and composite selectable. Eneo has added an integrated, compact, junction box to its bullet cameras, in the company’s high-performance Candid range Weather proof cameras All the Candid bullet cameras have tough, aluminum housings, which are weather proof-rated to IP67 and operate down to an impressive -30°C. The junction box includes all camera connections, cabled through the back of the box, which are then entirely protected and sealed against dust and moisture, once the camera is fitted to the front. The eneo Candid bullet cameras offer high-performance and are competitively priced. All three cameras feature a 1/2,8", 2MP or 3MP, Sony STARVIS CMOS sensor, providing high-quality, video images, even in low light conditions. They have powerful, integrated IR illumination; a 2.7mm to 12mm varifocal lens; onboard storage; triple streams for recording and viewing; a smartphone-ready, cross web browser for remote set up; low voltage and PoE supply; and built-in, low energy, heater. The eneo Candid bullet cameras offer high-performance and are competitively priced IP camera features The IP cameras’ onboard, analysis features include motion detection; tamper protection; trip wire; people counting; direction and field detection; defog; and vertical view. The multi-signal model includes defog, privacy masking and motion detection. Eneo’s new, Candid bullet cameras are available now through eneo’s established, UK distribution channels.
eneo’s new IER series network video recorders have an embedded Linux operating system. They comprise 4, 8 and 16 channel models of up to 5MP resolution, and 16 and 32 channel models of up to 8MP resolution. WARP-supported security integration “The IER recorders are designed to allow integrators to simply and easily fit their own hard drives to suit system requirements,” explains Jussi Simonen, Business Development Manager for eneo. “With one, two or four SATA HDD bays available, depending on the model, up to 32TB can be installed within the larger recorders. eSATA and iSCSI external storage capability can take this up by another 96TB. Our new, WARP feature also allows one ‘master’ eneo NVR to monitor and control other eneo NVRs on the same system, to create even larger, coordinated systems.” Covert camera mode and motion detection The 5MP models (the IER-25R040004A, IER-25N080004A and IER-25N100004A) feature H.264 compression; up to 128 Mbps recording throughput; 130 watts PoE budget; HDMI and VGA monitor outputs; and up to 8 alarm inputs and one alarm output. The higher spec 8MP models (the IER-38R160005A and IER-38R320005A) are 19” rack-mountable with both H.264 and H.265 compression options; up to 320 Mbps recording throughput; 130 watts PoE budget; Ultra HD HDMI and Full HD VGA monitor outputs; and 16 alarm inputs and one alarm output. All the IER recorders have CMS management software and a smartphone viewing app, covert camera mode and motion detection. eneo’s new IER series recorder range is competitively priced and available now through eneo’s UK distribution channels.
Protecting dormitory residents and assetsDownload
Protecting Critical Infrastructure through facial recognitionDownload
12 questions to ask your access control providerDownload
Providing frictionless cloud Video Storage as a Service (VSaaS)Download
Dallmeier deploys Panomera multifocal-sensor system to secure Gazprom Arena prior to 2021 Euro Football Championship
- Dallmeier deploys Panomera multifocal-sensor system to secure Gazprom Arena prior to 2021 Euro Football Championship
- VIVOTEK collaborates with Existo to deliver a comprehensive surveillance solution for Michigan cannabis cultivation facility
- Castel IP video entry systems installed by Protec Fire & Security Group on University of Northampton campus
- Fermax 2 Wire Duox system installed at an apartment complex in Nottingham