Bosch Security Systems extends Dinion camera range with Dinion IP

Product Profile

Bosch Security Systems has launched Dinion IP – its proven Dinion camera with integrated IP network connection - in response to the growing market demand for greater flexibility, improved camera functionality, reduced cost of ownership and improved accessibility.

Jeremy Hockham, UK Managing Director of Bosch Security Systems explains: “Internet Protocol (IP) has revolutionised the way the world communicates and it is now set to transform CCTV surveillance systems.   Installers are receiving more and more requests for IP-enabled cameras as their customers recognise the benefits of IP-based surveillance installations in comparison to traditional solutions.” 

Bosch’s Dinion range of fixed cameras was first launched in 2002 meeting the need for affordable, high-performance CCTV imaging, and it then later introduced the DinionXF series to offer high performance Colour and Day/Night models addressing the critical issues of sensitivity and dynamic range. 

The new Dinion IP cameras combine all the benefits and reliability of the Dinion range with a network video server that transmits video and control data over IP network which means that images can be transmitted to several receivers simultaneously.  Dinion IP cameras have tri-streaming technology: dual MPEG-4 and JPEG compression modes simultaneously allow a dedicated stream at one frame rate for recording and a different stream for live viewing, while JPEGS can be streamed to other devices such as a PDA. 

With an Ethernet connection and analogue BNC output, Dinion IP cameras offer customers a hybrid solution as they can be connected to existing analogue CCTV equipment, whilst still offering the additional flexibility and scalability of IP-based CCTV systems.  Installation is straightforward and they are easy to configure via the IP network: configuration settings can be stored as computer files and copied from one camera to another and settings can be uploaded to many cameras in the network simultaneously. 

The Dinion IP and DinionXF IP cameras have in-built intelligent functionality, like alarm management with relay output, event handling, alarm input and motion detection.  Dinion IP is fully compliant with the IEEE 802.3af Power-over-Ethernet (PoE) standard. PoE means that installation is easy and additional cabling is eliminated as cameras do not require a local AC power source.  An additional benefit with PoE installations is if the network is supported by an uninterruptible power supply (UPS), Dinion IP cameras can continue to operate even when there is a power failure.  

Bosch’s DinionXF IP and Dinion IP cameras can be fully integrated into Bosch’s VIDOS Video Management System and DiBos Digital Video and IP Recorder and Transmission System.  These cameras complement the other innovative IP products such as the VIP and VideoJet families of encoders and decoders and the VIDOS and NVR (Network Video Recorder).

Read more

Technical Specification

Make Bosch
Manufacturer Bosch Security Systems
Model code NWC-0455
Series Dinion XF Series
Chip Inch Size 1/3 inch
Colour Type Colour
Resolution 540 resolution
Digital (DSP) Yes
Specialist Type Network
Sensitivity Lux 0.12 lux
Auto Iris Yes
Direct Drive Yes
Electrical Specifications Voltage: 11~36 VDC / 12~28 VAC
Power Consumption: 8 VA
Wide Dynamic Range Yes
Picture Elements HxV 752 x 582
Network Properties Image Frame Rate: 25 / 30
Interface: 10/100baseT Ethernet, RJ45
Network Protocols: RTP, Telnet, UDP, TCP/IP, HTTP, IGMP, ICMP
Back Light Compensation Yes
White Balance Yes
Electronic Shutter Range 1/50 ~ 1/125,000
S/ N (Signal/ Noise) Ratio dB 50
Signal Mode PAL, NTSC
Compression Type MPEG-4, M-JPEG
Physical Specifications Weight g: 450
Dimensions mm: 118 x 67 x 58
Environmental Specifications Operating Temperature oC: 0 ~ 40
Operating Humidity %: 20 ~ 80
Additional info Dinion IP uses MPEG-4 compression, bandwidth throttling, and multicasting capabilities to efficiently manage bandwidth and storage requirements while delivering the best quality image quality and resolution.  On-screen Displays (OSD) simplify back focus adjustment and network configuration, leading to lower installation and support costs. Power over Ethernet (PoE) makes installation easier and more cost-effective because cameras can now be installed where there is no AC power outlet.
Download PDF version Download PDF version

Related Whitepapers

How security systems ensure healthy workplaces during COVID and after

Delivering a smart, secure and healthy workplace with cloud

Ensuring cybersecurity of video