OPTEX Intercom: Audio, Video Intercom Systems(1)
OPTEX Europe has launched a new Wireless Video Intercom System that scales from an easy to install intercom system to a more complex solution enabling remote door release, giving installers a more reliable and flexible access solution to address their customers’ requirements. The iVision+ wireless system comprises a convenient wireless handheld unit with LCD monitor and a wireless doorbell/camera unit with over 100 meters (330ft.) transmission range, line of sight. The handheld units can be housed within a wall mountable charging cradle that can be installed at any convenient point around the property. A particular innovation is the system’s ability to see who’s at the door when you’re at home or in the office, and to record images of who called when you’re out. The new technology contains a micro-USB port PC connection which gives property users the ability to download and view images taken automatically from the inbuilt 2.4inch LCD monitor. By using an additional gateway unit, an installer can also connect the intercom system to the electronic door, such that the iVision+ handheld unit can be then used as door release. iVision+ can be extended to a system accommodating two door units and four handsets. The door units operate within a temperature range of -20 to +40 degrees centigrade and have a 12-month battery life expectancy. Although wireless, they can be hard wired if required.Add to Compare
Browse Intercom: Audio, Video Intercom Systems
- Vandal Resistant
Audio, video or keypad entry products updated recently
Every building starts with the entrance. A solid enterprise risk mitigation and security strategy include protecting that entrance. Often, risk mitigation strategies protecting the entrance have included high-resolution video surveillance cameras, video management systems, and access control solutions. But that strategy and set of security solutions only tells part of the story. Imagine a security guard who is protecting a facility after hours, when an individual approaches the entrance and seeks to gain access. The security guard can pull up the video surveillance feed and see the individual and his movements, which appear to be suspicious. But he also needs to hear him in order to decide the next decisions and actions. Does he escalate the situation, calling for backup and for first responders’ response, or does he allow the individual access to the building because he works there and is authorised to enter? Meet high-definition voice What the security guard needs is to be able to hear and to communicate with that individual. All enterprise security systems need three primary components in order to successfully protect the entrance and to mitigate risk – access control, video surveillance, and the ability to hear and communicate. Each component plays an integral role in supporting a unified security system, and without all three, the security system is not complete. Access control can be thought of as the brains of a security system by holding data and permissions. It serves as the arms and hands of the system; it can either keep someone out or What a security guard needs is to be able to hear and to communicate with an individualinvite them in. IP video allows a security team to remotely position a set of eyes anywhere an IP camera can be placed on a network. With a video management system, security teams can see what is happening and decide how to respond. However, with remote viewing, the event may be over by the time security physically responds. Audio adds interactivity That three-component enterprise security system – comprising IP video, access control, and high-definition voice working together mitigates risks and provides value. It also means that security is interactive. Security teams talk and listen to the person that’s seen on a video surveillance system, no matter where the location or how remote. If the person is lost or simply needs assistance, security personnel can talk to them and provide direction and reassurance. Even more, in an emergency, an interactive solution becomes a critical life-saving tool, as it provides data that can be shared between security, police, emergency services, and more. Audio can also detect voices, noises, breaking glass, or other sounds that are not within direct view of a video camera. An interactive security system creates an informed response, by providing real-time situation awareness management. Post-event, it supports forensics and investigations to mitigate future security incidents. Audio and COVID-19 We are living in extraordinary times. As businesses begin to reopen and stay open, they are looking for any tools that can help them overcome the enormous That three-component enterprise security system – comprising IP video, access control, and high-definition voice working together mitigates risks and provides valuechallenges they face. In buildings and facilities, the COVID-19 pandemic has created a new security perimeter, one that demands contactless access with entry and exit, and that has also created a new duty of care for security professionals. Now more than ever is the need to interact and communicate with individuals moving in and out of doors and spaces without physical intervention. Intelligent communications, integrated with contactless access control, can help a business to comply with pandemic safety guidelines and ultimately, reopen for business and stay open. COVID-19 has also increased the need for clean-room isolation and quarantine spaces, sometimes in areas not originally intended for that use, where risk of infection is high, and equipment must be easily disinfected between patients. Here, purpose-built cleanroom intercoms, providing clear touchless communications despite the noisy environment, have emerged as critical tools for enabling patient care while reducing the need to enter the contaminated space. For example, voice communication can enable hospital staff to verify identity and to communicate with patients without entering the isolated and infectious environment, which can save on personal protective equipment (PPE) and reduce the amount of exposure to the virus. In non-emergency healthcare facilities, such as medical centers, voice can effectively relay information to building occupants and visitors for screening purposes. Visitors can be seen and heard. For example, a patient who seeks access to a medical center for an appointment can hear important instructions from a nurse via the intercom solution. Seeing the person that you talk to is one thing but hearing them conveys a much better sense of closeness, making it possible to maintain a high level of security and customer service. The whole story Today’s security systems should no longer simply involve video surveillance cameras generating feedback and images to a security guard. Instead, a new ecosystem for enterprise security and risk mitigation has emerged, and it’s one that involves video surveillance, access control, and high-definition voice. That ecosystem can ensure well-rounded and responsive information management and security platform, all communicating with each other and offering actionable insight into risks and potential physical breaches. Audio is the new value hub of the connected and intelligent school, campus, building, correctional facility, and more. Simply put, a silent security system cannot be an effective security system. In every situation, it is crucial for all security professionals to mitigate risk, no matter what they are protecting. This emphasizes the need to hear, be heard, and be understood in virtually any environment.
Across the world, the impact of the current pandemic has majorly disrupted how we function in our everyday lives, as a society, and the ways in which we do our jobs. Throughout, our personal safety and wellbeing, as well as that of our families, neighbours and colleagues, has been paramount - and adapting our day-to-day lives to meet social distancing measures has been a learning curve for us all. As we start to reassemble normal life, precautionary measures will continue to be put in place to achieve the universal aim of mitigating the spread of the virus as much as possible. As different countries reach new stages of this process, some parts of the world continue to live and work in lockdown, whilst some are beginning to open up. This means governments, as well as businesses and organisations, will need to think beyond one-way systems and sanitation stations to contain the risk of infection as more people begin to return to the outside world. Tracing the spread of COVID-19 Of course, this will need to be driven by higher-level support from leaders in government, healthcare and technology to develop innovative ways of tracking and tracing the spread of COVID-19. From contact tracing solutions, to self-reporting apps and thermal screening cameras – governments and businesses across Europe have a new responsibility to seek and reinforce the most effective ways to ensure people’s safety. These measures are particularly pertinent to those reopening their doors as lockdown eases, and those returning to a daily routine of commuting to and serviced office spaces. As more and more people begin to move through public and commercial areas, we will rely more on technology to run in the background to ensure safety and wellbeing is monitored - much like that of the everyday CCTV camera. Thermal temperature screening cameras One piece of technology that we can expect to see as more commonplace is the thermal temperature screening cameras and monitoring system. An example of this kind of device, is D-Link’s recently launched all-in-one, intelligent fever screening kit – which includes a dual-lens thermographic camera, blackbody calibrator, as well as integrated management software. Governments, as well as businesses and organisations, will need to think beyond one-way systems and sanitation stations to contain the risk of infection The premise of temperature screening cameras like this one, is to harness thermal imaging technology coupling it with AI to identify if a person is experiencing elevated temperatures, and raise the alarm automatically when someone at risk of spreading is detected. To monitor the progression or depletion of COVID-19, technologies such as AI facial recognition will play an important role in mitigating the risks of the virus spreading. Thermal cameras that use AI can easily capture and manage employee’s temperature and stop their entrance if a fever is detected. For this reason, such devices are normally installed in a doorway or entrance to a building to quickly detect and identify those displaying symptoms before entering a building. This type of surveillance will be detrimental to the management of COVID-19 in the world of a ‘new normal’ – as companies feel their way out and learn as they go along with people’s health and wellbeing continuing to be centre of the mind. Just as lockdown has had an impact on physical as well as mental health, so too will the adjustment to living life post-pandemic. Not only in getting used to and dealing with the emotional and mental pressures of life on the ‘outside’ as they leave lockdown, but they also face the very real risk of contracting the virus and the worries they may have of spreading it. Appropriate installation of temperature screening Companies and organisations have a responsibility in these times to play a supportive role towards employees, such as allowing them to continue working from home until they feel comfortable to work in an office setting. Equally, as restrictions ease, employers have a duty to make the workplace a safe place that is able to uphold the wellbeing of staff, which is where, as we wait for a vaccine, we must make use of the available technology. However, in the case of the thermal camera, in order for it to deliver effective results, it must be installed appropriately. To support this, we have outlined some key points to consider when deploying a temperature screening camera here: Choose a solution that features a blackbody calibrator – a vital part for any temperature screening device. A blackbody calibrator is the basis for accurate calibration of infrared thermography devices and allows the device to accurately detect a fever. Check for facing windows or doorways and heat sources such as radiators as these increase the risk of stray heat or cold sources throwing off readings according to the ISO standard associated with this type of equipment Be wary of weather and changes in climate as the device will need time to acclimatise – in order for readings to be clear individuals coming in from outside must wait five minutes before being screened When mounted, the camera must face individuals head-on and in parallel with their face to capture the inner eye area which is crucial for temperature reading Consider an option using AI which will automatically recognise individuals based on photos in the system Check applicability and legality of temperature screening cameras before deploying There’s a long way to go before life will fully return to normal. In the meantime, and to help everyone along the way, it’s essential that the right measures are in place to protect the physical and mental wellbeing of those we are responsible for. For anyone who is exploring options, know that there is help out there to provide guidance and expertise on the solutions that will be right for you and your business - now, as we go through the remainder of lockdown, and as we slowly move back into everyday lives.
The safeguarding of premises through the monitoring of entrance and exit points has traditionally been a very manual aspect of security. Human operators have been relied on to make decisions about who to admit and deny based on levels of authorisation and the appropriate credentials. But the access control business, like many industries before it, is undergoing its own digital transformation; one where the protection of premises, assets and people is increasingly delivered by interconnected systems utilising IoT devices and cloud infrastructure to offer greater levels of security and protection. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification, right through to complex networks of thermal cameras, audio speakers and sensors. These systems, connected through the cloud, can be customised and scaled to meet the precise requirements of today’s customer. And it’s the ease of cloud integration, combined with open technologies and platforms that is encouraging increasing collaboration and exciting developments while rendering legacy systems largely unfit for purpose. Remote management and advanced diagnostics Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution.Cloud technology and IoT connectivity means remote management and advanced diagnostics form an integral part of every security solution. For example, as the world faces an unprecedented challenge and the COVID-19 pandemic continues to cause disruption, the ability to monitor and manage access to sites remotely is a welcome advantage for security teams who might otherwise have to check premises in person and risk breaking social distancing regulations. The benefits of not physically having to be on site extend to the locations within which these technologies can be utilised. As an example, within a critical infrastructure energy project, access can be granted remotely for maintenance on hard to reach locations. Advanced diagnostics can also play a part in such a scenario. When access control is integrated with video surveillance and IP audio, real-time monitoring of access points can identify possible trespassers with automated audio messages used to deter illegal access and making any dangers clear. And with video surveillance in the mix, high quality footage can be provided to authorities with real-time evidence of a crime in progress. Comprehensive protection in retail Within the retail industry, autonomous, cashier-less stores are already growing in popularity The use of connected technologies for advanced protection extends to many forward-looking applications. Within the retail industry, autonomous, cashier-less stores are already growing in popularity. Customers are able to use mobile technology to self-scan their chosen products and make payments, all from using a dedicated app. From an access control and security perspective, connected doors can be controlled to protect staff and monitor shopper movement. Remote management includes tasks such as rolling out firmware updates or restarting door controllers, with push notifications sent immediately to security personnel in the event of a breach or a door left open. Remote monitoring access control in storage In the storage facility space, this too can now be entirely run through the cloud with remote monitoring of access control and surveillance providing a secure and streamlined service. There is much to gain from automating the customer journey, where storage lockers are selected online and, following payment, customers are granted access. Through an app the customer can share their access with others, check event logs, and activate notifications. With traditional padlocks the sharing of access is not as practical, and it’s not easy for managers to keep a record of storage locker access. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers. The elimination of manual tasks, in both scenarios, represents cost savings. When doors are connected to the cloud, their geographical location is rendered largely irrelevant. Online doors and locks enable monitoring capabilities and heightened security for both operators and customers They become IoT devices which are fully integrated and remotely programmable from anywhere, at any time. This creates a powerful advantage for the managers of these environments, making it possible to report on the status of a whole chain of stores, or to monitor access to numerous storage facilities, using the intelligence that the technology provides from the data it collects. Open platforms power continuous innovation All of these examples rely on open technology to make it possible, allowing developers and technology providers to avoid the pitfalls that come with the use of proprietary systems. The limitations of such systems have meant that the ideas, designs and concepts of the few have stifled the creativity and potential of the many, holding back innovation and letting the solutions become tired and their application predictable. Proprietary systems have meant that solution providers have been unable to meet their customers’ requirements until the latest upgrade becomes available or a new solution is rolled out. This use of open technology enables a system that allows for collaboration, the sharing of ideas and for the creation of partnerships to produce ground-breaking new applications of technology. Open systems demonstrate a confidence in a vendor’s own solutions and a willingness to share and encourage others to innovate and to facilitate joint learning. An example of the dynamic use of open technology is Axis’ physical access control hardware, which enables partners to develop their own cloud-based software for control and analysis of access points, all the while building and expanding on Axis’ technology platform. Modern access control solutions range from simple card readers to two factor authentication systems using video surveillance as a secondary means of identification Opportunities for growth Open hardware, systems and platforms create opportunities for smaller and younger companies to participate and compete, giving them a good starting point, and some leverage within the industry when building and improving upon existing, proven technologies. This is important for the evolution and continual relevance of the physical security industry in a digitally enabled world. Through increased collaboration across technology platforms, and utilising the full range of possibilities afforded by the cloud environment, the manufacturers, vendors and installers of today’s IP enabled access control systems can continue to create smart solutions to meet the ever-changing demands and requirements of their customers across industry.
Fenix Monitoring, an approved NSI Gold Alarm Receiving Centre (ARC), has entered into a new partnership with OPTEX to support its customers in providing state-of-the-art security response services. The business, founded in 2018 by Managing Director, Carl Meason, will harness the reliability and performance of OPTEX’s Intelligent Visual Monitoring solution to extend its services to provide visually verified alarms, enhancing security by capturing genuine alarms while filtering out nuisance alarms in a diverse range of environments. OPTEX – Fenix Monitoring partnership Fenix Monitoring, which provides CCTV, intruder and lone worker monitoring solutions, has built its reputation on the principles of digital innovation, data analysis and customer-driven experience. These principles provide cutting edge security products and services to the monitoring market, culminating with being recognised as British Security Industry Association (BSIA) SME business of the year 2020. Carl Meason believes the partnership with OPTEX will enable Fenix to significantly enhance their product offering to its customers. Carl Meason said “Fenix Monitoring continues its mission of partnering with the most innovative companies out there, and delivering products and services that are industry leading. In joining forces with OPTEX, we have added another technology partner that can help us build the very best monitoring solutions for our customers.” OPTEX Intelligent Visual Monitoring solution OPTEX’s Intelligent Visual Monitoring Solution offers a number of key benefits, including privacy mode" Carl adds, “OPTEX’s Intelligent Visual Monitoring Solution offers a number of key benefits, especially in relation to its privacy mode which means we will only see a silhouette when an alarm is activated. The homeowner or end-user can then lift this privacy feature, should the alarm be genuine and the person monitoring can see exactly what is going on.” Benjamin Linklater, Sales Director at OPTEX Europe, is looking forward to the new partnership with Fenix Monitoring. He said, “We are very pleased to welcome Fenix to the network of monitoring centres offering our cloud-based visual monitoring solution. Fenix is an agile, technology-focused security company constantly looking for new solutions to solve their customers’ issues.” Intruder and CCTV technologies installed on single site The OPTEX Intelligent Visual Monitoring solution enables separate intruder and CCTV technologies installed on the same site, but acting independently, to be connected using the OPTEX Bridge and create one, seamless, integrated and intelligent visual monitoring solution. Intruder alarms can now be visually verified within seconds, without impacting the integrity of the technology installed or its grade. When an alarm occurs, a signal is instantly sent to the ARC whose operator can view images pre and post the alarm event via a dedicated portal to determine whether the alarm is genuine.
Harper Security Systems, which specialises in specifying and installing smart security solutions for residential and private properties, has selected OPTEX’s range of Intelligent Passive Infrared (PIR) sensors for their reliability in detecting external threats, especially in rural environments. Three properties in the Home Counties and Lincolnshire are using a combination of OPTEX’s proven PIR sensors to protect property, people, and other important assets including horses from the dangers of vandalism and theft. OPTEX’s range includes sensors which offer panoramic 180-degree detection coverage and 12m/40ft radius to detect any intrusion around a residential or commercial building. Commercial business environments They are ideally suited for protecting larger residential grounds and flat roofs typical with outbuilding on farms and stables. “We have worked with OPTEX for a number of years and have found their range of PIR sensors to be extremely accurate and reliable, which is critical when specifying external detection,” says Alan Harper, Director at Harper Security Systems. The flexibility and versatility of the sensors is such that they are ideal for multiple environments" “The flexibility and versatility of the sensors is such that they are ideal for multiple environments,” Alan continues. “For example, we have recently installed them at a private stables in Lincolnshire to protect horses and valuable equestrian equipment, residences in rural villages in both Bedfordshire and Hertfordshire to protect property and personal items, as well as in commercial business environments.” Innovative security solutions Ben Linklater, Sales Director at OPTEX Europe, says that while the focus is often on towns and cities, crime in the countryside is a huge issue, costing the rural community in the UK more than £9 million this year alone: “Reliable external protection is becoming increasingly important not only to secure equipment and assets, but also livestock and other animals like horses. The earlier the detection the better chance there is to prevent intruders." "External intrusion detection is essential in rural environments as most assets, many of which are expensive to replace (and some are irreplaceable), are stored outside. We are very pleased to work with Harper Security who understand the benefits of early detection to keep premises, assets, people and animals secure, delivering innovative security solutions to their customers.”
One of the key problems in airport security is the sheer size of the perimeter and a large number of incidents are in fact linked to unauthorised access onto the airfield, either runways or where aircrafts are being loaded or refuelled posing an extremely high risk. Most airports will combine multiple sensors and technologies to protect the actual perimeter fence and even beyond the perimeter fence, to warn of potential threats. OPTEX LiDAR sensor integration with RSA module Some airports have found the level of information generated by the perimeter security systems quite challenging to deal with and they wanted to decrease the number of events so operators could focus on what was critical. The Airport development team at Genetec integrated the OPTEX LiDAR sensor into their Restricted Security Area (RSA) Surveillance module, an extension of the Genetec Security Center platform with the purpose to unify data from the sensor and camera to present more meaningful information to the operators. Restricted Security Area Surveillance module The RSA module has been designed specifically with a view to providing wide area protection The RSA module has been designed specifically with a view to providing wide area protection and integrating with wide area surveillance technology, including radar, fibre optic and laser detection devices. The solution allows security staff to determine the level of threat for each area, map them, and utilise OPTEX technologies to identify and locate quickly and precisely the point of intrusion. For instance, with Fibre optic fence sensor, zones can be 100m-200m long and will identify people cutting through a fence, crawling under or climbing over. Newer fibre technologies provide point location. Another way to pin-point exact intruder location is with OPTEX LiDAR technologies or with Radar. ‘Fuse’ data into a single event A particularly intelligent feature of the system is its ability to ‘fuse’ data (known as ‘target fusion’) coming from multiple sources and confirm an event as a single (i.e. the same) activity rather than a multiple threat. For instance, using the X&Y coordinates provided by OPTEX REDSCAN sensors, RSA allows to map exactly the path of the intruders or moving vehicles, fuses the path from one camera to the other and considers it as one event, one target and tracks it precisely on the map. Intelligent tracking and event categorisation This gives a more meaningful picture to the operator and presents events in a unified and intelligent way. This helps support the security team in making the right decisions. The deeper integration of OPTEX’s technologies into Genetec’s RSA platform enables intelligent tracking and event categorisation, making it a very precise security system for airports.
Related white papers
5 reasons to integrate mobile technology into your security solution
RFID and smartphone readers in physical access control
The role of IT in physical access control
How to ramp up perimeter security with license plate reader technologyDownload
Solve access control challenges in the healthcare sectorDownload
Getting the most value from Software Subscription AgreementsDownload
Shifting trends in operation centers and control rooms for 2021Download
Videx VX2200 system touch free entry protects patients, visitors and NHS workers at Milton Keynes University Hospital
- Videx VX2200 system touch free entry protects patients, visitors and NHS workers at Milton Keynes University Hospital
- Vanderbilt installs ACT365 cloud-based access control reader at Denmark’s Vejle marina
- Comelit and Howarth Homes deliver smart access control and door entry system for Lovell House
- Fermax DUOX 2 wires solution for Evelina London Children's Hospital in UK