ComNet FVR21/LV dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The unit incorporates a “Loss of Video” relay for each channel. Upon loss of video signal or optical fiber break, the normally closed relay opens. The module is ideal for CCTV installations and the rack mount version can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage. The module utilises Manual Gain control.
| Make | ComNet |
|---|---|
| Manufacturer | ComNet Europe Ltd. |
| Model code | FVR21/LV |
| Transmission type | Fibre Optic transmission |
| TX/RX | RX |
| Video Outputs | 2 |
| Network Properties | Image Colour: Colour |
| Number of Fibres | 2 |
| Signal Mode | PAL / NTSC |
| Bandwidth MHz | 5 Hz ~ 10 MHz |
| Physical Specifications |
Weight g: 900 Dimensions mm: 155 x 135 x 28 |
| Electrical Specifications |
Power Consumption: 130 mA Voltage: 8 ~ 15 V DC |
| Environmental Specifications |
Operating Temp oC: -40 ~ +75 C (-40 ~ +167 F) Operating Humidity %: 0 ~ 95 |
| Video Signal V, ohms | 1 volt pk-pk (75 ohms) |
| Additional info | ComNet FVR21/LV dual video receiver detects two independent AM video signals in one module on two independent multimode fiber optic cables. The unit incorporates a “Loss of Video” relay for each channel. Upon loss of video signal or optical fiber break, the normally closed relay opens. The module is ideal for CCTV installations and the rack mount version can be used to double the fixed video capacity of the C1 rack for up to 28 independent video channels per card cage. The module utilises Manual Gain control. |