ACT Access control systems & kits(1)
This is an 8 Input and 8 Output device that allows an ACT controller to be used in applications where signalling to other equipment is required. Examples of this are elevator control, alarm systems, CCTV switching applications, I/O Mapping etc.Main Features 8 form C relays 8 supervised inputs Tamper protection 2 status LEDs Polycarbonate housing Input and output names Timer for each output Output switched off or on by log event, input, timezone ACTWinPro support Inputs and outputs Logged Normally open/closed Inputs monitored by timezone Supervised Inputs optionAdd to Compare
Browse Access control systems & kits
Access control system products updated recently
Gallagher 2 Door Kit - PoE+ for distributed one to two door access control using an Ethernet connection
Should ‘Made in China’ be seen as a negative in security systems and products? It’s an important and complex issue that merits a more detailed response than my recent comment in the Expert Panel Roundtable. For me, there are two sides of the answer to this question: Buying products that have certain negative attributes that are not in alignment with some part of a belief system or company mandate. Buying products that do not perform as advertised or do something that is unacceptable. For integrators and end users making the buying decisions, the drive to purchase products may not be based on either aspect and instead on the product that can do the best job for their business. But for others, a greater emphasis on the ethical implications of purchasing decisions drives decision-making. What is ethical consumption? Ethical consumption is a type of consumer activism that is based on the concept of ‘positive buying’ in that ethical products are favouredEthical consumption — often called ethical consumerism — is a type of consumer activism that is based on the concept of ‘positive buying’ in that ethical products are favoured, and products that are ethically questionable may be met with a ‘moral boycott’. This can be as simple as only buying organic produce or as complex as boycotting products made in a totalitarian regime that doesn't offer its citizens the same freedoms that we enjoy in the United States. Consider the goals of the Boston Tea Party or the National Consumers League (NCL), which was formed to protect and promote social and economic justice for consumers and workers in the United States and abroad. Some examples of considerations behind ethical consumption include fair trade, treatment of workers, genetic modification, locally made and processed goods, union-made products and services, humane animal treatment, and in general, labour issues and manufacturing practices that take these factors into account. Increase in ethical consumption The numbers show that ethical consumption is on the rise. In a 2017 study by Unilever, 33 percent of consumers reported choosing to buy and support brands that they believe are doing social or environmental good. In the same study, 53 percent of shoppers in the United Kingdom and 78 percent in the United States said they feel better when they buy products that are ‘sustainably’ produced. There’s clear evidence that products from some Chinese companies suffer from cybersecurity vulnerabilities Though the aforementioned question that sparked this conversation centres around concerns with products made in China, there are many other countries where, for example, governments/dictators are extremely repressive to all or parts of their populations, whose products, such as oil, diamonds, minerals, etc., we happily consume. There are also a number of countries that are a threat in terms of cybersecurity. It may be naive and simplistic to single out Chinese manufacturers. Impact on physical security products Product buying decisions based on factors other than product functionality, quality and price are also starting to permeate the security marketplace. While this hasn't been a large focus area from the business-to-business consumption side, it's something that should be considered for commercial security products for a variety of reasons. Hardware hacks are more difficult to pull off and potentially more devastating" There’s clear evidence that products from some Chinese companies suffer from cybersecurity vulnerabilities. Last fall, 30 U.S. companies, including Apple and Amazon, were potentially compromised when it was discovered that a tiny microchip in the motherboard of servers built in China that weren't a part of the original specification. According to a Bloomberg report, “This attack was something graver than the software-based incidents the world has grown accustomed to seeing. Hardware hacks are more difficult to pull off and potentially more devastating, promising the kind of long-term, stealth access that spy agencies are willing to invest millions of dollars and many years to get.” This, along with many other incidents, are changing the considerations behind purchasing decisions even in the physical security industry. Given that physical security products in general have been lax on cybersecurity, this is a welcome change. Combating tech-specific threats In early January, members of the U.S. Senate introduced bipartisan legislation to help combat tech-specific threats to national security posed by foreign actors and ensure U.S. technological supremacy by improving interagency coordination across the U.S. government. The bill creates the Office of Critical Technologies & Security at the White House, an indication that this issue is of critical importance to a number of players across the tech sector. Members of the U.S. Senate introduced bipartisan legislation to help combat tech-specific threats to national security posed by foreign actors To address a significant number of concerns around ethical production, there are certifications such as ISO 26000 which provides guidance on social responsibility by addressing accountability, transparency, ethical behaviour, respect for stakeholder interests, respect for rule of law, respect for international norms of behaviour and respect for human rights. While still emerging within physical security, companies that adhere to these and other standards do exist in the marketplace. Not buying products vulnerable to cyberattacks It may be counter-productive, even irresponsible, to brand all products from an entire country as unfit for purchasing. Some manufacturers’ products may be ethically questionable, or more vulnerable to cyberattacks than others; so not buying products made by those companies would make sense. The physical security industry might be playing a bit of catch up on this front, but I think we're beginning to see a shift toward this kind of responsible buying behaviour.
Users of security systems have long been willing to sacrifice certain aspects of security in favour of convenience and ease of use. The tide seems to be turning, however, with the industry at large showing significant concerns over cyber security. End user sentiments also seem to be following that trend, becoming more cautious when it comes to having their security systems connected to the internet. While it has become the norm for security systems to be accessible online, still it presents security threats that unconnected systems would not face. In 2018, we saw a notable shift from the convenience of a connected system to the less convenient, but more secure, standalone system. Consumers are willingly making the choice to trade convenience for security, and companies are responding. While cyber security concerns will continue to be a big topic of discussion, connected platforms will probably be the trend of 2019This in turn is driving an increase in more IoT-like deployments. Rather than the traditional client that is connected to a device to retrieve information, more often we are seeing more active devices, capable of reporting their presence and transmitting information on a scheduled basis, without the need for a client. Preventing security systems from outside threats This changes the dynamic of the network and alleviates many threats associated with traditional systems because there is no opportunity for outside threats to access your system since the device is transmitting information out vs requiring a connection to the outside world. With IoT deployments, when the device is active and sending messages out of the network segment, it is not vulnerable in the same way that the traditional systems are. While cyber security concerns will continue to be a big topic of discussion, connected platforms will probably be the trend of 2019. In 2018, we saw an increased acceptance in the residential market for smart home applications. While this has been an area of discussion for the past ten years, it is now gaining real traction. With artificial intelligent capabilities in tow, smart home deployments are more common than ever and the video analytics that accompany them are quite impressive. Cloud security for the commercial sector If consumers are trusting their home security systems with this, it only makes sense that they will begin trusting Google to provide security for their offices as wellIn addition to the residential market, connected platforms will likely start to impact the commercial space as well. The border between consumer and commercial user will become a little more blurred. Companies such as Google that cater primarily to home services have cloud capabilities beyond the means of many competitors, in turn giving them a favourable advantage to provide security for the cloud. If consumers are trusting their home security systems with this, it only makes sense that they will begin trusting Google to provide security for their offices as well. As far as ONVIF is concerned, we are excited to see how the market will adopt the newly released Profile T for advanced video streaming in the coming year. We are also excited to explore our relationship with the International Electrotechnical Commission (IEC), by continuing our work on giving devices the ability to communicate upwards and proactively. It is clear that the market is open to adopting models in the quest for more efficiency without sacrificing security.
Edward Snowden’s name entered the cultural lexicon in 2013, after he leaked thousands of classified National Security Agency documents to journalists. He’s been variously called a traitor, a patriot, a revolutionary, a dissident and a whistleblower, but however you personally feel about him, there’s one way to categorise him that no one can dispute: He’s a thief. There’s no doubt about it: Snowden’s information didn’t belong to him, and the scary truth is that he is neither the first nor the last employee to attempt to smuggle secrets out of a building – and we need to learn from his success to try to prevent it from happening again. Since the dawn of the digital age, we’ve fought cyber pirates with tools like firewalls, encryption, strong passwords, antivirus software and white-hat hackers. But with so much attention on protecting against cyber risks, we sometimes forget about the other side of the coin: the risk that data will be physically removed from the building. Douglas Miorandi, director of federal programs, counter-terrorism and physical data security for Metrasens, recently discussed the major risks to physical data security with SourceSecurity.com. Q: What do you believe are the main physical threats to data? The biggest threats I have seen in the physical data security space have varied over the years, but there are four specific risks that remain the same across the board for any organisation, which are: Every organisation is at risk of having data walk out the building with that employee The Insider Threat The Outsider Threat The Seemingly Innocent Personal Item Poor or Nonexistent Screening To beginning with, every company or government agency has at least one disgruntled employee working for them, whether they know it or not, and that means every organisation is at risk of having data walk out the building with that employee. That is what security experts call the insider threat. Q: What do you think influences employees to steal data from their own organisation? People steal data from their workplaces because they see some means to an end, whether it’s to expose something embarrassing or damaging due to a personal vendetta, or because they can sell it to a competitor or the media and benefit financially – meaning they don’t even need to be disgruntled; they might just want a quick way to make a buck. Financial data, too, is attractive, both for insider trading and selling to the competition. People steal data from their workplaces because they see some means to an end, whether it’s to expose something embarrassing or damaging due to a personal vendetta, or because they can sell it to a competitor or the media and benefit financially This can happen to both private companies as well as government agencies. Take Natalie Mayflower Sours Edwards for example, a Treasury Department employee who was caught in the act just last month, when she disclosed sensitive government information about figures connected to the Russia investigation to a reporter. She didn’t hack the system, she simply used a flash drive. And let’s not forget that Snowden was a contractor working for the NSA. Q: Many of us think of security threats coming from an outsider, do companies still face these type of threats? Yes. Unfortunately, organisations do not only need to worry about their own employees – companies and government agencies need to be wary of threats from outsiders. COTS devices include SD cards, external hard drives, audio recorders and even smart phones They can come in the form of the corporate spy – someone specifically hired to pose as a legitimate employee or private contractor in order to extract information – or the opportunistic thief – a contractor hired to work on a server or in sensitive areas who sees an opening and seizes it. Either one is equally damaging to sensitive data because of the physical access they have. Q: Whether it be an insider threat or an outsider threat, what are ways these individuals can steal sensitive data? There are two types of personal items that can be used to steal data: the commercially available off-the-shelf (COTS) variety, and the intentionally disguised variety. This is considered risk number three – the seemingly innocent personal item. COTS devices include SD cards, external hard drives, audio recorders and even smart phones, any of which can be used to transport audio, video and computer data in and out of a building. Intentionally disguised devices are straight out of the spy novel; they could be a recording device that looks like a car key fob, or a coffee mug with a USB drive hidden in a false bottom. Intentionally disguised devices are straight out of the spy novel; they could be a recording device that looks like a car key fob, or a coffee mug with a USB drive hidden in a false bottom Q: What is the difference between COTS and disguised devices? The difference between COTS and disguised devices is that if someone gets caught with a COTS device, security will know what it is and can confiscate it. The disguised device looks like a security-approved item anyone could be carrying into the workplace, making it especially devious. Sometimes these devices don’t just function to bring information out of a building; they are used to damage a server or hard drive once it’s plugged in to a computer or the network. Some are both – a recording device that extracts data and then destroys the hard drive. Companies with airtight cyber security protocols can sometimes fall down when it comes to physically screening peopleQ: With these types of discrete items, can security personnel still catch individuals in the act? For example, through security screenings? Poor or nonexistent screening is the most substantial security threat to any organisation when it comes to sensitive data. Whether it’s an employee, an outside contractor or a device, the physical security risks are real, and everyone and everything entering and leaving a building needs to be screened. Unfortunately, screening often isn’t occurring at all, or is ineffective or inconsistent when it does occur. Even companies with airtight cyber security protocols can sometimes fall down when it comes to physically screening people and stopping them from stealing data through recording devices. Q: It’s surprising that so many organisations would neglect physical security when protecting their data. It’s a huge mistake, and the consequences can be dire. They range from loss of customer trust, exorbitant lawsuits and tanking stock prices in the private sector; and risks to national security in the public sector. Costs and resource allocation increase as well during efforts to reactively fix or mitigate the effects of physically stolen data. For both the private and public sectors, the risk for data to be physically removed from a building has never been greater. Years ago, it was much harder for the average Joe to figure out where they could sell stolen data. Now, with the Deep Web, anyone with Tor can access forums requesting specific information from competing spy agencies, with instructions on how to deliver it, greatly reducing the risk of getting caught – and increasing the likelihood people will try it. Although it’s getting easier to sell data, the good news is that all of these threats are avoidable with the right measures. Physical data security and cybersecurity must be considered the yin and yang of an airtight policy that effectively protects sensitive or confidential assets from a malicious attack Q: So how can an organisation protect against these risks? There are a number of ways – and the first one requires a change of mindset. Not long ago, the building/physical security department and the IT/cybersecurity department were considered two different entities within an organisation, with little overlap or communication. Organisations now are realising that, because of the level of risk they face from both internal and external threats, they must take a holistic approach to data security. Physical data security and cybersecurity must be considered the yin and yang of an airtight policy that effectively protects sensitive or confidential assets from a malicious attack. Q: How can companies and government agencies combine both physical data security and cybersecurity initiatives? Physical security managers can advise cybersecurity managers on ways to reinforce their protocols – perhaps by implementing the newest surveillance cameras in sensitive areas, or removing ports on servers so that external drives cannot be used. Organisations need to create an effective program and ensure it stays effective so people know it’s not worth the hassle to try In turn, the cybersecurity team can let the physical security team know that they have outside contractors coming in to work on the server, and the physical security team can escort the contractors in and stand guard as they work. Constant communication and a symbiotic relationship between the two departments are crucial to creating an effective holistic security protocol and, once you’ve got the momentum going, don’t let it slow down. Sometimes efforts start off strong and then peter out if priorities change. When guards are down, it’s an excellent time for a malicious actor to strike. Organisations need to create an effective program and ensure it stays effective so people know it’s not worth the hassle to try. It’s not just about the mentality, though. Using the right technology is just as important. Q: What type of technology can you use to protect physical data? Many problems can be avoided by simply using the right technology to detect devices that bring threats in and carry proprietary information out. Electronics such as hard drives, cell phones, smart watches, SD cards and recording devices have a magnetic signature because of the ferrous metals inside them. Using a ferromagnetic detection system (FMDS) as people enter and exit a building or restricted area means that anything down to a small microSD card triggers an alert, allowing confiscation or further action as needed. Electronics such as hard drives, cell phones, smart watches, SD cards and recording devices have a magnetic signature because of the ferrous metals inside them Q: How does FMDS work? In the most basic terms, FMDS uses passive sensors that evaluate disturbances in the earth’s magnetic field made by something magnetic moving through its detection zone. Nothing can be used to shield the threat, because FMDS doesn’t detect metallic mass; it detects the magnetic signature, down to a millionth of the earth’s magnetic field. FMDS is the most reliable method of finding small electronics items and should be part of the “trust, but verify” model Although it is a passive technology, it is more effective and reliable than using hand wands or the walk-through metal detectors typically seen in an airport, which cannot detect very small ferrous metal objects. FMDS can see through body tissue and liquids, so items cannot be concealed anywhere on a person or with their belongings. Whether or not the items are turned on doesn’t matter; FMDS doesn’t work by detecting a signal, but rather by spotting the magnetic signature that electronics contain. This is ideal, because most recording devices do not emit any signal whatsoever. In my experience, FMDS is the most reliable method of finding small electronics items (as well as other ferrous metal objects, like weapons), and should be part of the “trust, but verify” model, in which companies assume the best of their employees and anyone else entering the building, but still take necessary precautions. Q: What are the key takeaways for organisations looking to enhance data security? The toughest challenge in the security sector – whether it’s cyber or physical – is remembering that the bad guys are constantly looking for ways to slip in through the cracks, and security departments need to stay one step ahead to ward off both internal and external threats. Recognising the existing threats, putting together a holistic security strategy, and using the right technology to detect illicit devices comprises an effective three-pronged approach to protecting an organisation’s data. Organisations cannot afford to be passive about security and assume employees won’t steal data and spies won’t sneak in. Strong countermeasures are necessary because data loss can come from both inside and outside, in both private and public sectors, from places not everyone thinks of – and with technology like FMDS acting as a backup to the human element, organisations can lock down their data and keep the wolves in sheep’s clothing from getting through the door.
Security industry stakeholders from across the subcontinent have descended upon Mumbai for the 8th edition of Secutech India, which opens its doors today at the Bombay Exhibition Center. Taking place from 25 – 27 April, the fair offers business, networking and sourcing opportunities for India’s commercial security, smart home and fire safety sectors. In addition, plenty of educational value can be gained through the fairs fringe events, which include a fire safety training and two full days of smart city and security technology forums. Ms Regina Tsai, the Deputy General Manager of Messe Frankfurt New Era Business Media Ltd, spoke about the distinguishing features of this year’s fair: “In response to market demands, this year’s show features more exhibitors from the smart home and intelligent transportation sectors. “Exciting products gaining traction in these sectors include home surveillance systems, integrated home networks and vehicle tracking solutions. We have also refined the fringe programme to incorporate the most relevant topics for the Indian market, including smart city solutions, cyber security, and the growing role of artificial intelligence.” Altogether, 100 exhibitors representing over 400 brands are featured across 15,000 sqm of exhibition space Security products on display The ‘Make in India’ initiative has sparked a renaissance among Indian OEMs, with many domestic security and fire safety brands such as ESSL, Mantra, Biomax and AAAG represented across the show floor. In addition to the domestic companies, there is also a significant international presence. Brands Avigilon, Hikvision, Vanderbilt and Veracity, join the fair’s strong exhibitor line-up to display the latest surveillance cameras, access control systems, intrusion alarms, police equipment, and perimeter security systems for the commercial and government sectors. Altogether, 100 exhibitors representing over 400 brands are featured across 15,000 sqm of exhibition space. A highlight of the international contingent is the Shenzhen pavilion, where buyers are able to find security, smart home solutions, components, networking communication systems and peripherals. Shenzhen is one of China’s powerhubs for security manufacturers, and the attending exhibitors were carefully selected to represent a wide array of solutions for visitors seeking OEM opportunities. Smart home zone The new smart home zone features a selection of smart cameras, locks and integrated networksAnother convergence point at the fair is the new smart home zone. Featuring a selection of smart cameras, locks and integrated networks, the zone serves as a hub for suppliers to connect with property developers, architects, system integrators and other related buyers. Elsewhere, the concurrent ‘Fire and safety India’ event is a significant attraction for the fire safety fraternity. The event returns for its 4th edition this year as the destination for visitors to get hands-on with the latest fire detection and alarm systems, firefighting gear, evacuation apparatus and rescue equipment. Whether trying to penetrate the Indian market or further bolster their brand exposure, exhibitors will be aiming to connect with as many trade visitors as possible during the show. Fair organisers are anticipating a similar visitor turnout to the previous edition, which attracted 22,720 trade visitors, including distributors, system integrators, architects and consultants. Smart City Infrastructure Conference On top of being a business and networking occasion, the fair adds even more value to the visitor experience through its fringe programme of forums, seminars and events. This year’s programme is headlined by the ‘Smart City Infrastructure Conference’, which takes place on day one. A panel discussion is set to examine how smart cities will develop in India over the next five yearsAs part of the conference, a panel discussion is set to examine how smart cities will develop in India over the next five years. Other discussions analyse emergency response mechanisms and cyber security in smart cities. In addition, the ‘Security Technology Conference’ takes place on the second day of the fringe programme to explore supply-chain security in e-commerce, as well as AI and its impact on the security industry. Fire safety training to raise awareness On the final day, industry experts will gather for the highly anticipated fire safety training day. As part of the concurrent ‘Fire and Safety India’ event, and run by the State of Maharashtra Fire Service and the Mumbai Fire Brigade, the training aims to raise awareness among corporate professionals and wider society. Important topics to be addressed during the training include the common causes of fire, fire safety precautions, fire drills, evacuation procedures and safety legislation. On top of providing a platform conducive to information exchange, the fringe programme is also a hub to celebrate the achievements of India’s security and fire safety fraternity. The SECONA Shield Awards return this year to acclaim OEMs, system integrators, consultants and end users for product innovations, R&D, successful projects, unique designs and outstanding individual contributions to India’s safety and security landscape. The awards are co-organised with the Security Consultants Association of India, and the winners will be announced on the 26th April.
Access control has become a central component for the safety and security strategies of today's schools, and due to the complicated threats and challenges these facilities face, a school's access control technology must be innovative and intelligent enough to ensure comprehensive protection. The education sector is a gateway to the future for young people all over the world. But to assure this passage, schools must guarantee their students safety as well as their education. One such example of Vanderbilt solutions at work in the education sector is at a Study Abroad University in London that hosts students from the USA. Enabling campus security Live and recorded footage can be viewed remotely, and footage can be used in evidence The university wanted a security system to protect their student accommodation; in particular, a keyless system that would grant 24/7 access to its students while also enabling campus security to monitor these activities remotely. Vanderbilt’s ACT365 keeps audit trails of who is in the student accommodation by monitoring and recording fob activity. Additionally, the system produces diagnostic reports on door status and can investigate situations such as door forced, door ajar and break glass activation either locally or remotely. If an incident arises in the student accommodation, ACT365 can link events at doors through video footage so campus security can quickly identify and react. Live and recorded footage can be viewed remotely, and footage can be used in evidence. Real-time list In further protecting students’ safety, campus security can provide pin codes, access fobs, and cards to students. These credentials can be remotely enabled or disabled if required. This can be managed on desktops, laptops tablet, or smartphone device. In the event of a fire or other emergency, ACT365 automatically unlocks all doors allowing students to reach safety. The ACT365 muster report gives security campus a real-time list of all students in the campus The ACT365 muster report gives security campus a real-time list of all students in the campus accommodation building. When students exit their accommodation and swipe out, the muster report automatically updates. If someone is missing, campus security can check cameras and call them directly by clicking on their name in the dashboard. Safeguarding foundations Security in education is a crucial issue. It requires thoughtful attention and procedure while allowing room for agility, adaptability, and dependability moving forward – flagship traits of the Vanderbilt brand. Students want to attain a higher education in a safe and secure environment while enjoying their first step into varied careers. Vanderbilt’s solutions respond to these expectations and enable active safeguarding foundations to be laid.
ACRE, renowned global provider of state-of-the-art security systems, has announced that it has entered into a definitive agreement to acquire RS2 Technologies in Munster, Indiana. This purchase will enhance ACRE’s strategic expansion plans for strengthening its access control business and product portfolio. Following on from the recent acquisition of Open Options in December of 2018, ACRE continues to build its access control strength and reach in the North American market. ACRE’s portfolio now consists of Vanderbilt, Open Options, RS2 and ComNet, providing a robust offering to meet the needs across many verticals and the requirements of simple applications to very complex enterprise systems. RS2 security platform The RS2 platform was designed to easily integrate with other security system components RS2, founded in 1998, has long prided itself on the use of an open architecture platform approach in order to provide a broad product offering whilst working with a multitude of technology partners. RS2 goes the extra mile to address customer concerns and satisfy customer needs. RS2 has stayed in tune with the demands of the industry, listening to VOC from both end users and installers. The RS2 platform was designed to easily integrate with other security system components. ACRE’s CEO, Joseph Grillo, stated that this transaction continues to expand ACRE’s competitive position in a highly fragmented market with great growth potential. “The acquisition of RS2 boosts ACRE’s portfolio in the access control market and provides us one more seat at the table in a highly competitive market with many companies vying for the same work”, commented Grillo. “ACRE will continue to look for strategic opportunities to build the portfolio with complementary, albeit competitive, acquisitions.” Access control portfolio expansion “This is a great opportunity for RS2 to further expand our customer base and leverage the benefits of being a part of a broader ACRE portfolio,” said David W. Barnard, Director of Dealer Development/Partner. “We are excited to be joining the ACRE family and this will help push RS2 to the next level, and more quickly achieve our 2025 growth goals.” Financial details of the transaction were not released. The transaction is expected to close by the end of April 2019.
Three reasons for adopting open architecture access control solutionsDownload
5 steps to finding the right access control system for youDownload
Why outdated access control systems are a big problemDownload
- Gallagher’s advanced access control and security system secures Ahli United Bank
- SMARTair wireless access control solution brings sensitive areas at the Syrenparken mental health treatment facility under total control
- London’s Riverscape office building upgrades to Boon Edam Crystal TQ revolving doors and Lifeline Speedlane Swing optical turnstiles
- Maxxess eFusion technology ensures enhanced security and safety at some of Dubai’s elite 5-star hotels