BQT Solutions Access control systems & kits(8)
The IP based SMAX Access Control Management System From BQT is a sophisticated, intelligent and cost-effective security system, which manages the movement of staff and visitors within a building complex. SmaX can be managed and administered by any authorized individual, from any PC that has access to the network. The system is WEB browser based which means that the database and configuration remains within the SmaX hardware, offering a high level of data security and not requiring a dedicated PC. Individuals with the correct administration levels can manage remote sites from any location - obtaining reports, authorizing cards and changing access criteria, providing an ideal solution for multi site installations. Designed with the user in mind, setup and configuration are fast and the system is easy to manage - it's completely scalable and can be expanded as your needs grow. The SmaX management software enables the enrolment of Biometric and Mifare card Data at the click of a button, with the option of associating the cardholder photograph at the same time. The SmaX system has a single intelligent module to make the decisions at the door. Access permissions and transactions are carried out in these devices, which report directly to the main system in real time. If the Network fails at any point, these devices ensure system continuity without comprising security. Smax reduces the cost and stress involved in the management of staff and building security. New European website has been launched. To visit, click here.Add to Compare
Browse Access control systems & kits
- BQT Solutions
Access control system products updated recently
Gallagher 2 Door Kit - PoE+ for distributed one to two door access control using an Ethernet connection
Should ‘Made in China’ be seen as a negative in security systems and products? It’s an important and complex issue that merits a more detailed response than my recent comment in the Expert Panel Roundtable. For me, there are two sides of the answer to this question: Buying products that have certain negative attributes that are not in alignment with some part of a belief system or company mandate. Buying products that do not perform as advertised or do something that is unacceptable. For integrators and end users making the buying decisions, the drive to purchase products may not be based on either aspect and instead on the product that can do the best job for their business. But for others, a greater emphasis on the ethical implications of purchasing decisions drives decision-making. What is ethical consumption? Ethical consumption is a type of consumer activism that is based on the concept of ‘positive buying’ in that ethical products are favouredEthical consumption — often called ethical consumerism — is a type of consumer activism that is based on the concept of ‘positive buying’ in that ethical products are favoured, and products that are ethically questionable may be met with a ‘moral boycott’. This can be as simple as only buying organic produce or as complex as boycotting products made in a totalitarian regime that doesn't offer its citizens the same freedoms that we enjoy in the United States. Consider the goals of the Boston Tea Party or the National Consumers League (NCL), which was formed to protect and promote social and economic justice for consumers and workers in the United States and abroad. Some examples of considerations behind ethical consumption include fair trade, treatment of workers, genetic modification, locally made and processed goods, union-made products and services, humane animal treatment, and in general, labour issues and manufacturing practices that take these factors into account. Increase in ethical consumption The numbers show that ethical consumption is on the rise. In a 2017 study by Unilever, 33 percent of consumers reported choosing to buy and support brands that they believe are doing social or environmental good. In the same study, 53 percent of shoppers in the United Kingdom and 78 percent in the United States said they feel better when they buy products that are ‘sustainably’ produced. There’s clear evidence that products from some Chinese companies suffer from cybersecurity vulnerabilities Though the aforementioned question that sparked this conversation centres around concerns with products made in China, there are many other countries where, for example, governments/dictators are extremely repressive to all or parts of their populations, whose products, such as oil, diamonds, minerals, etc., we happily consume. There are also a number of countries that are a threat in terms of cybersecurity. It may be naive and simplistic to single out Chinese manufacturers. Impact on physical security products Product buying decisions based on factors other than product functionality, quality and price are also starting to permeate the security marketplace. While this hasn't been a large focus area from the business-to-business consumption side, it's something that should be considered for commercial security products for a variety of reasons. Hardware hacks are more difficult to pull off and potentially more devastating" There’s clear evidence that products from some Chinese companies suffer from cybersecurity vulnerabilities. Last fall, 30 U.S. companies, including Apple and Amazon, were potentially compromised when it was discovered that a tiny microchip in the motherboard of servers built in China that weren't a part of the original specification. According to a Bloomberg report, “This attack was something graver than the software-based incidents the world has grown accustomed to seeing. Hardware hacks are more difficult to pull off and potentially more devastating, promising the kind of long-term, stealth access that spy agencies are willing to invest millions of dollars and many years to get.” This, along with many other incidents, are changing the considerations behind purchasing decisions even in the physical security industry. Given that physical security products in general have been lax on cybersecurity, this is a welcome change. Combating tech-specific threats In early January, members of the U.S. Senate introduced bipartisan legislation to help combat tech-specific threats to national security posed by foreign actors and ensure U.S. technological supremacy by improving interagency coordination across the U.S. government. The bill creates the Office of Critical Technologies & Security at the White House, an indication that this issue is of critical importance to a number of players across the tech sector. Members of the U.S. Senate introduced bipartisan legislation to help combat tech-specific threats to national security posed by foreign actors To address a significant number of concerns around ethical production, there are certifications such as ISO 26000 which provides guidance on social responsibility by addressing accountability, transparency, ethical behaviour, respect for stakeholder interests, respect for rule of law, respect for international norms of behaviour and respect for human rights. While still emerging within physical security, companies that adhere to these and other standards do exist in the marketplace. Not buying products vulnerable to cyberattacks It may be counter-productive, even irresponsible, to brand all products from an entire country as unfit for purchasing. Some manufacturers’ products may be ethically questionable, or more vulnerable to cyberattacks than others; so not buying products made by those companies would make sense. The physical security industry might be playing a bit of catch up on this front, but I think we're beginning to see a shift toward this kind of responsible buying behaviour.
Users of security systems have long been willing to sacrifice certain aspects of security in favour of convenience and ease of use. The tide seems to be turning, however, with the industry at large showing significant concerns over cyber security. End user sentiments also seem to be following that trend, becoming more cautious when it comes to having their security systems connected to the internet. While it has become the norm for security systems to be accessible online, still it presents security threats that unconnected systems would not face. In 2018, we saw a notable shift from the convenience of a connected system to the less convenient, but more secure, standalone system. Consumers are willingly making the choice to trade convenience for security, and companies are responding. While cyber security concerns will continue to be a big topic of discussion, connected platforms will probably be the trend of 2019This in turn is driving an increase in more IoT-like deployments. Rather than the traditional client that is connected to a device to retrieve information, more often we are seeing more active devices, capable of reporting their presence and transmitting information on a scheduled basis, without the need for a client. Preventing security systems from outside threats This changes the dynamic of the network and alleviates many threats associated with traditional systems because there is no opportunity for outside threats to access your system since the device is transmitting information out vs requiring a connection to the outside world. With IoT deployments, when the device is active and sending messages out of the network segment, it is not vulnerable in the same way that the traditional systems are. While cyber security concerns will continue to be a big topic of discussion, connected platforms will probably be the trend of 2019. In 2018, we saw an increased acceptance in the residential market for smart home applications. While this has been an area of discussion for the past ten years, it is now gaining real traction. With artificial intelligent capabilities in tow, smart home deployments are more common than ever and the video analytics that accompany them are quite impressive. Cloud security for the commercial sector If consumers are trusting their home security systems with this, it only makes sense that they will begin trusting Google to provide security for their offices as wellIn addition to the residential market, connected platforms will likely start to impact the commercial space as well. The border between consumer and commercial user will become a little more blurred. Companies such as Google that cater primarily to home services have cloud capabilities beyond the means of many competitors, in turn giving them a favourable advantage to provide security for the cloud. If consumers are trusting their home security systems with this, it only makes sense that they will begin trusting Google to provide security for their offices as well. As far as ONVIF is concerned, we are excited to see how the market will adopt the newly released Profile T for advanced video streaming in the coming year. We are also excited to explore our relationship with the International Electrotechnical Commission (IEC), by continuing our work on giving devices the ability to communicate upwards and proactively. It is clear that the market is open to adopting models in the quest for more efficiency without sacrificing security.
Edward Snowden’s name entered the cultural lexicon in 2013, after he leaked thousands of classified National Security Agency documents to journalists. He’s been variously called a traitor, a patriot, a revolutionary, a dissident and a whistleblower, but however you personally feel about him, there’s one way to categorise him that no one can dispute: He’s a thief. There’s no doubt about it: Snowden’s information didn’t belong to him, and the scary truth is that he is neither the first nor the last employee to attempt to smuggle secrets out of a building – and we need to learn from his success to try to prevent it from happening again. Since the dawn of the digital age, we’ve fought cyber pirates with tools like firewalls, encryption, strong passwords, antivirus software and white-hat hackers. But with so much attention on protecting against cyber risks, we sometimes forget about the other side of the coin: the risk that data will be physically removed from the building. Douglas Miorandi, director of federal programs, counter-terrorism and physical data security for Metrasens, recently discussed the major risks to physical data security with SourceSecurity.com. Q: What do you believe are the main physical threats to data? The biggest threats I have seen in the physical data security space have varied over the years, but there are four specific risks that remain the same across the board for any organisation, which are: Every organisation is at risk of having data walk out the building with that employee The Insider Threat The Outsider Threat The Seemingly Innocent Personal Item Poor or Nonexistent Screening To beginning with, every company or government agency has at least one disgruntled employee working for them, whether they know it or not, and that means every organisation is at risk of having data walk out the building with that employee. That is what security experts call the insider threat. Q: What do you think influences employees to steal data from their own organisation? People steal data from their workplaces because they see some means to an end, whether it’s to expose something embarrassing or damaging due to a personal vendetta, or because they can sell it to a competitor or the media and benefit financially – meaning they don’t even need to be disgruntled; they might just want a quick way to make a buck. Financial data, too, is attractive, both for insider trading and selling to the competition. People steal data from their workplaces because they see some means to an end, whether it’s to expose something embarrassing or damaging due to a personal vendetta, or because they can sell it to a competitor or the media and benefit financially This can happen to both private companies as well as government agencies. Take Natalie Mayflower Sours Edwards for example, a Treasury Department employee who was caught in the act just last month, when she disclosed sensitive government information about figures connected to the Russia investigation to a reporter. She didn’t hack the system, she simply used a flash drive. And let’s not forget that Snowden was a contractor working for the NSA. Q: Many of us think of security threats coming from an outsider, do companies still face these type of threats? Yes. Unfortunately, organisations do not only need to worry about their own employees – companies and government agencies need to be wary of threats from outsiders. COTS devices include SD cards, external hard drives, audio recorders and even smart phones They can come in the form of the corporate spy – someone specifically hired to pose as a legitimate employee or private contractor in order to extract information – or the opportunistic thief – a contractor hired to work on a server or in sensitive areas who sees an opening and seizes it. Either one is equally damaging to sensitive data because of the physical access they have. Q: Whether it be an insider threat or an outsider threat, what are ways these individuals can steal sensitive data? There are two types of personal items that can be used to steal data: the commercially available off-the-shelf (COTS) variety, and the intentionally disguised variety. This is considered risk number three – the seemingly innocent personal item. COTS devices include SD cards, external hard drives, audio recorders and even smart phones, any of which can be used to transport audio, video and computer data in and out of a building. Intentionally disguised devices are straight out of the spy novel; they could be a recording device that looks like a car key fob, or a coffee mug with a USB drive hidden in a false bottom. Intentionally disguised devices are straight out of the spy novel; they could be a recording device that looks like a car key fob, or a coffee mug with a USB drive hidden in a false bottom Q: What is the difference between COTS and disguised devices? The difference between COTS and disguised devices is that if someone gets caught with a COTS device, security will know what it is and can confiscate it. The disguised device looks like a security-approved item anyone could be carrying into the workplace, making it especially devious. Sometimes these devices don’t just function to bring information out of a building; they are used to damage a server or hard drive once it’s plugged in to a computer or the network. Some are both – a recording device that extracts data and then destroys the hard drive. Companies with airtight cyber security protocols can sometimes fall down when it comes to physically screening peopleQ: With these types of discrete items, can security personnel still catch individuals in the act? For example, through security screenings? Poor or nonexistent screening is the most substantial security threat to any organisation when it comes to sensitive data. Whether it’s an employee, an outside contractor or a device, the physical security risks are real, and everyone and everything entering and leaving a building needs to be screened. Unfortunately, screening often isn’t occurring at all, or is ineffective or inconsistent when it does occur. Even companies with airtight cyber security protocols can sometimes fall down when it comes to physically screening people and stopping them from stealing data through recording devices. Q: It’s surprising that so many organisations would neglect physical security when protecting their data. It’s a huge mistake, and the consequences can be dire. They range from loss of customer trust, exorbitant lawsuits and tanking stock prices in the private sector; and risks to national security in the public sector. Costs and resource allocation increase as well during efforts to reactively fix or mitigate the effects of physically stolen data. For both the private and public sectors, the risk for data to be physically removed from a building has never been greater. Years ago, it was much harder for the average Joe to figure out where they could sell stolen data. Now, with the Deep Web, anyone with Tor can access forums requesting specific information from competing spy agencies, with instructions on how to deliver it, greatly reducing the risk of getting caught – and increasing the likelihood people will try it. Although it’s getting easier to sell data, the good news is that all of these threats are avoidable with the right measures. Physical data security and cybersecurity must be considered the yin and yang of an airtight policy that effectively protects sensitive or confidential assets from a malicious attack Q: So how can an organisation protect against these risks? There are a number of ways – and the first one requires a change of mindset. Not long ago, the building/physical security department and the IT/cybersecurity department were considered two different entities within an organisation, with little overlap or communication. Organisations now are realising that, because of the level of risk they face from both internal and external threats, they must take a holistic approach to data security. Physical data security and cybersecurity must be considered the yin and yang of an airtight policy that effectively protects sensitive or confidential assets from a malicious attack. Q: How can companies and government agencies combine both physical data security and cybersecurity initiatives? Physical security managers can advise cybersecurity managers on ways to reinforce their protocols – perhaps by implementing the newest surveillance cameras in sensitive areas, or removing ports on servers so that external drives cannot be used. Organisations need to create an effective program and ensure it stays effective so people know it’s not worth the hassle to try In turn, the cybersecurity team can let the physical security team know that they have outside contractors coming in to work on the server, and the physical security team can escort the contractors in and stand guard as they work. Constant communication and a symbiotic relationship between the two departments are crucial to creating an effective holistic security protocol and, once you’ve got the momentum going, don’t let it slow down. Sometimes efforts start off strong and then peter out if priorities change. When guards are down, it’s an excellent time for a malicious actor to strike. Organisations need to create an effective program and ensure it stays effective so people know it’s not worth the hassle to try. It’s not just about the mentality, though. Using the right technology is just as important. Q: What type of technology can you use to protect physical data? Many problems can be avoided by simply using the right technology to detect devices that bring threats in and carry proprietary information out. Electronics such as hard drives, cell phones, smart watches, SD cards and recording devices have a magnetic signature because of the ferrous metals inside them. Using a ferromagnetic detection system (FMDS) as people enter and exit a building or restricted area means that anything down to a small microSD card triggers an alert, allowing confiscation or further action as needed. Electronics such as hard drives, cell phones, smart watches, SD cards and recording devices have a magnetic signature because of the ferrous metals inside them Q: How does FMDS work? In the most basic terms, FMDS uses passive sensors that evaluate disturbances in the earth’s magnetic field made by something magnetic moving through its detection zone. Nothing can be used to shield the threat, because FMDS doesn’t detect metallic mass; it detects the magnetic signature, down to a millionth of the earth’s magnetic field. FMDS is the most reliable method of finding small electronics items and should be part of the “trust, but verify” model Although it is a passive technology, it is more effective and reliable than using hand wands or the walk-through metal detectors typically seen in an airport, which cannot detect very small ferrous metal objects. FMDS can see through body tissue and liquids, so items cannot be concealed anywhere on a person or with their belongings. Whether or not the items are turned on doesn’t matter; FMDS doesn’t work by detecting a signal, but rather by spotting the magnetic signature that electronics contain. This is ideal, because most recording devices do not emit any signal whatsoever. In my experience, FMDS is the most reliable method of finding small electronics items (as well as other ferrous metal objects, like weapons), and should be part of the “trust, but verify” model, in which companies assume the best of their employees and anyone else entering the building, but still take necessary precautions. Q: What are the key takeaways for organisations looking to enhance data security? The toughest challenge in the security sector – whether it’s cyber or physical – is remembering that the bad guys are constantly looking for ways to slip in through the cracks, and security departments need to stay one step ahead to ward off both internal and external threats. Recognising the existing threats, putting together a holistic security strategy, and using the right technology to detect illicit devices comprises an effective three-pronged approach to protecting an organisation’s data. Organisations cannot afford to be passive about security and assume employees won’t steal data and spies won’t sneak in. Strong countermeasures are necessary because data loss can come from both inside and outside, in both private and public sectors, from places not everyone thinks of – and with technology like FMDS acting as a backup to the human element, organisations can lock down their data and keep the wolves in sheep’s clothing from getting through the door.
Ava Group (AVA), a provider of security risk management services and technology will be showcasing its portfolio of security solutions at ISC West - Las Vegas, booth 25103. ISC West is the largest converged security industry trade show in the US with the exhibition taking place from April 10-12th. The event provides a major platform for professional networking, sourcing new suppliers and introducing new products and technologies, encompassing everything from access control to unmanned vehicles. ISC West also includes the SIA Education@ISC conference programme, running from April 9-11th. Risk management services Ava Group’s technology division incorporates two well established security risk management companies - Future Fibre Technologies (FFT) and BQT Solutions, both of which will be on the booth this April. As a provider of risk management services and technologies, Ava Group offers a portfolio of complementary solutions encompassing both fiber optic intrusion detection as well as high security access control and locking. Ava Group is proud to present the latest solutions from its technology division, namely the Orca lock and latest enhancements to the Aura Ai-2 controller Ava Group is proud to present the latest solutions from its technology division, namely the Orca lock and latest enhancements to the Aura Ai-2 controller. The enhanced Aura Ai-2 from Future Fibre Technologies features unrivalled high-sensitivity detection, location accuracy, cut resilience capability and the industry’s longest linear range. Outdoor locking solution This product features new ultra-low noise optical detection electronics. This ensures a single controller can cover a distance up to 110 kilometers, accurately detecting, locating and reporting multiple disturbances to just +/- two meters. BQT Solutions will be demonstrating the new high-strength Orca lock (YG80) – providing ultimate security for all environments. Building on the success of the award winning YG10, the Orca lock is designed for securing gates, roller doors, shipping containers and any other large door or entryway. Alongside the Orca’s impressive physical attributes, a unique feature is its ability to fully integrate into an access control system, surpassing any other solutions available in the market. Orca is fully monitored, weatherproof, and user configurable - providing the perfect indoor and outdoor locking solution. Real-world projects The Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats As well as getting to know the product range, the Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats. Newly appointed Chief Operating Officer, Scott Basham commented, “We’ve seen continued growth in demand for our products in the US market and returning to ISC West provides us with a perfect platform to showcase our broad range of capabilities and explain to visitors how our product range can be applied to meet their particular needs. We always welcome the opportunity to be face-to-face with our customers worldwide and thoroughly enjoy being able to engage directly with the market in this way.” Fiber sensing technology Alongside their presence in the exhibition hall, Ava Group’s CTO – Technology, Dr Jim Katsifolis will be presenting ‘Fiber Optic Perimeter Intrusion Detection Systems (PIDS): Trends, Myths and Realities Revealed’ 10:15 am on April 9th, Sands 302. This presentation promises to cover how best to select appropriate fiber sensing technology products when specifying, as well as how to assess the true performance of such PIDS systems. With over 1,000 exhibitors and brands and an anticipated 30,000 security professionals, ISC West is a must-visit for anyone in the security risk industry.
Ava Group (AVA), a provider of security risk management services and technology will be showcasing its portfolio of security solutions at Intersec Dubai 2019, stand S3-C48. Intersec Dubai features a rich selection of exhibitors in Security, Safety & Fire Protection, attracting visitors from the Middle East, Africa, the Indian subcontinent and well beyond. Ava Group will be presenting the latest exciting solutions from its technology division - which incorporates Future Fibre Technologies (FFT) and BQT Solutions. As a provider of risk management services and technologies, Ava Group offers a portfolio of complementary solutions encompassing both fibre optic intrusion detection and high security access control and locking. Increased investment As a key event for the region and beyond, Intersec Dubai is the perfect way for security providers and buyers to start 2019" Mark Horton, Global Sales & Marketing Director commented, “As a key event for the region and beyond, Intersec Dubai is the perfect way for security providers and buyers to start 2019. Our solutions offer the very latest in security technology and the highest levels of protection, key benefits that we know are always well-received by visitors at the event.” Mark continued, “Over the last couple of years we have seen a significant growth in demand for our products in the Middle East, with increased investment in infrastructure across the region as a whole. Because of continued growth in the market, we have also invested in the expansion of our Dubai-based office and regional support team to ensure we are perfectly placed to supply and service our customers.” Reporting multiple disturbances Future Fibre Technologies will be showcasing its enhanced Aura Ai-2 controller. Featuring unrivalled high-sensitivity detection, location accuracy, cut resilience capability and the industry’s longest linear range - this product features new ultra-low noise optical detection electronics. This ensures a single controller can cover a distance up to 110 kilometres, accurately detecting, locating and reporting multiple disturbances to just +/- two metres. Also on stand S3-C48, BQT Solutions will be demonstrating the new high-strength Orca lock to the middle east market Also on stand S3-C48, BQT Solutions will be demonstrating the new high-strength Orca lock to the middle east market. Building on the success of the award winning YG10, the Orca lock is designed for securing gates, roller doors, shipping containers and any other large door or entryway. Alongside the Orca’s impressive physical attributes, a unique feature is its ability to fully integrate into an access control system, surpassing any other solutions available in the market. Security risk management Orca is fully monitored, weatherproof, and user configurable - providing the perfect indoor and outdoor locking solution. As well as the products themselves, the Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats. Mark concluded, “We are looking forward to discussing recent key examples of our technology in action, including a major military closed data network where our data network infrastructure protection solution is protecting against tapping and tampering. These projects illustrate the depth of our expertise in security risk management and highlight the level of protection which we achieve to client’s assets and infrastructure. If you are visiting the event come and have a chat with our friendly and expert team on Stand S3-C48 about your specific security needs.”
BQT Solutions, a provider of high security card and biometric readers and locks, has launched its new Orca weatherproof lock which provides industry-leading strength, unparalleled environmental durability and seamless access control integration for securing gates, roller doors, shipping containers, and any other large door or entryway. Matthew Nye-Hingston, CTO of BQT Solutions Locking division commented, “Orca is the ultimate weatherproof lock, providing the complete combination of strength, security and convenience in one solution. It encompasses the features found in premium electronic locks, with the physical strength and function required to secure doors of any shape, whatever size.” Integration into access control system Key features such as an IP67 rated design and built-in heater enable the Orca to withstand extreme weather environments including hot and cold climatesOrca lock is the latest generation of roller lock from BQT Solutions, building on an impressive portfolio that includes the YG10 – winner of the SIA New Product Showcase Award in the Lock Systems and Secure Storage Containers category presented at ISC West 2018. Along with its highly impressive physical attributes, Orca’s ability to integrate into an access control system is what elevates its abilities well beyond anything else on the market. Orca is fully monitored and user-configurable, whilst being impervious to weather or environmental challenges making it perfect for deployment indoors or outdoors. Orca’s standout features include: High Security Performance - With a holding force in excess of 50,000N, 18mm diameter stainless steel bolt pin and reinforced strike design, the Orca lock ensures the most sensitive sites remain protected from even the most vigorous methods of attack. Fully Weatherproof - Key features such as an IP67 rated design and built-in heater enable the Orca to withstand extreme weather environments including hot and cold climates, marine and desert conditions. Highly Configurable - Orca can be adapted to suit a wide range of application requirements, with user selectable fail safe/fail secure modes and three user selectable control methods. Complete Monitoring - Orca can truly become a part of the access control system, with a range of output signals including: bolt locked and unlocked position, door position, and tamper detection. Versatile Installation - A symmetrical design means Orca can be installed both horizontally and vertically, giving greater flexibility to installers looking for optimum positioning. Low Cost Running - With the heater disabled, Orca offers low current consumption, drawing as little as 30mA in standby and only 300mA in operation at 12VDC. Long-term Reliability - A high quality low voltage motor is the key to the Orca’s reliability while stainless steel and wear resistant plastic components ensure complete peace of mind for any security operator. Optimal heavy-duty monitored lock BQT Solutions is a specialist in the development, manufacture and supply of high quality, high security card and biometric readersMatthew added, “Orca is the perfect heavy-duty monitored lock for any integrated security solution. Our highly-skilled team in New Zealand has worked hard to ensure we bring a product to the market that we truly believe is the best of its kind. With several exhibitions lined up in the new year, we are looking forward to showing more customers how Orca can secure their installations.” An Ava Group company, BQT Solutions is a specialist in the development, manufacture and supply of high quality, high security card and biometric readers, electromechanical locks and related electronic security products. The company provides a wide range of both off-the-shelf solutions and purpose tailored solutions. Working with major system integrators, security consultants and end users, BQT Solutions develops tailored access control solutions to fulfil a range of access control requirements. From standalone units to fully integrated enterprise solutions, BQT access control systems are designed to provide maximum security, maximum value – and a migration path to meet present and future needs.
Why outdated access control systems are a big problemDownload
Five things to consider for AI with video technologyDownload
OSDP is the strongest access control for your businessDownload
- Matrix COSEC time-attendance and access control solutions enhance IndiaNivesh’s financial services
- Trackforce SaaS platform streamlines retail security to effectively manage physical security and loss prevention
- Security Industry Association partners with NCS4 and ISC West to provide education on stadium and public venue security
- Gallagher access control solution secures Waikato District Health Board