PAC Access control systems & kits

Motion detection is a key feature of security systems in residential and commercial environments. Until recently, systems have relied heavily on closed circuit television (CCTV) and passive infrared (PIR) sensors, which both require significant investment and infrastructure to install and monitor. Developments in wireless technology are increasing home security possibilities. Few years ago, these developments led Cognitive Systems to discover that the wireless signals surrounding oneself can be used to detect motion. Known in the wireless industry as WiFi sensing, this technology brings many benefits that other motion detection solutions have not been able to provide. The working of WiFi sensing At Cognitive Systems, the company has used WiFi sensing technology to develop a motion detection solution called WiFi Motion™, which measures and interprets disruptions in RF signals transmitted between WiFi devices. When movement occurs in a space, ripples in the wireless signals are created. WiFi Motion interprets these ripples and determines if an action, such as sending a notification, is needed. Enabling this functionality in a space is incredibly simple. With a software upgrade to only one’s WiFi access point (or mesh router), motion sensing capabilities are layered into one’s WiFi network. Existing connected WiFi devices then become motion detectors without detracting from their original functions or slowing down the network. Using artificial intelligence (AI), WiFi Motion establishes a benchmark of the motionless environment and learns movement patterns over time, which could be used to predict trends. This allows unusual movement patterns to be detected with greater accuracy while decreasing the potential for costly false alerts. WiFi Motion requires no line-of-sight or installation WiFi sensing and other home monitoring solutions All of these capabilities are made possible by WiFi sensing and together create a motion detection system that provides unparalleled accuracy, coverage, privacy and affordability compared to other solutions on the market. PIR integration is far more complex and imposes electronic and physical design restrictions compared to WiFi sensing. In terms of placement, PIR systems are difficult to install, requiring line-of-sight and a device in every room for localisation. WiFi Motion requires no line-of-sight or installation and is also a scalable solution compared to PIR. Much like cameras, PIRs can only cover so much space, but WiFi Motion can cover the entire home and even detect motion in the dark and through walls, without adding additional devices to the home. WiFi Motion detects less distinguishing context than cameras and microphones, but more context than regular PIR sensors for the perfect balance of privacy and highly accurate motion detection. Privacy solution While cameras have been the security solution for years, WiFi Motion offers a more affordable solution that can rival the privacy and coverage capabilities of even the most high-end cameras. With such a wide coverage area, one might think that WiFi sensing infringes on privacy, but actually, the opposite is true. With WiFi Motion, the contextual information collected cannot be used to identify a specific individual, unlike cameras which can clearly identify a person’s face or microphones, which can identify a person’s voice. It is different from other smart home security options that use cameras and microphones because it only senses motion using WiFi signals - it doesn’t “see” or “listen” like a camera or microphone would. This provides opportunities for added security in spaces where privacy might be a concern and installing a camera may not be a comfortable solution, such as bathrooms and bedrooms. The data collected is also anonymised and highly encrypted according to stringent industry privacy standards. Existing connected WiFi devices then become motion detectors Additional WiFi sensing applications Since WiFi sensing technology requires no additional hardware or subscription fees, it is much more affordable than other motion detection solutions. It can be used as a standalone solution, or it can be easily layered into more complex systems. This ease of integration, scalability and relatively low cost brings a lot of potential for various applications. Motion detection can trigger other smart devices in the network to turn lights on or off In eldercare, for example, WiFi sensing can be used to help seniors live comfortably in their homes for as long as possible. With the increasing aging population and high costs associated with care homes, the market for this application is considerable. Caregivers can use an app to monitor movement in their loved one’s home and be alerted about unusual movement patterns that could indicate a concern. For smart homes and other environments that have a network of smart devices, the artificial intelligence (AI) component of the technology allows for improvements to automated features. Motion detection can trigger other smart devices in the network to turn lights on or off or make adjustments to the temperature in a room. Security for the commercial sector For office buildings and other commercial properties, it is easy to see how all of these features could be scaled up to offer a highly accurate and cost-effective motion sensing and smart device automation solution. Cognitive Systems is closely involved with the development of WiFi sensing technology, working with various industry groups to establish standards and help it reach its full potential. WiFi Motion is merely the tip of the iceberg in terms of motion sensing possibilities, but its applications in the world of security are undeniably compelling. It is an exciting time for the wireless industry, as one works with stakeholders in the security space to explore everything this technology can do.

The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for post and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing whilst obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc whilst sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for manoeuvre. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.

The unprecedented global impact of COVID-19 has taken its toll on all of us, but as cases of the virus thankfully recede, employers are now forced to confront how they can enable a safe return to work for employees. For many employers, this means they will have to carry out a COVID-19 risk assessment, redesign workspaces to maintain social distances, carry out more frequent cleaning, manage the transmission risk and find alternatives to touch-based security devices. Protecting workplace occupants in any emergency requires preparation and clear communication. This is especially critical in a health crisis involving an infectious disease. These are some of the essential best practices that could help organisations reduce the impact on their employees and operations during this pandemic. 1. Use a visitor management system With a visitor management system, organisations have a single source of real-time and historical insights into who is, or was recently, in the workplace. This is especially important because of the need to perform contact tracing should anyone in the organisation show symptoms of COVID-19, meaning everyone they have been in contact with needs to be contacted and asked to isolate. Yet still, first impressions are made at the front desk or lobby, where the visitor experience needs to be a positive one. At the same time, though, any emergency event requires that there be strict control over who is entering the workplace. This policy also needs to be clearly communicated to visitors. Doing this minimises risk to visitors as well as the workforce. In addition to delivering a high-quality visitor experience, the ideal visitor management system must: Enable organisations to meet regulatory compliance mandates and facilitate check-in at a self-service kiosk to minimise wait times. Customise the visitor experience to support specific security needs, such as accelerating and simplifying check-in or requiring additional security pre-checks. Automate compliance as it relates to visitor access rules with historical visit reports. 2. Pre-check questions at visitor registration kiosks Organisations can strengthen security at the registration kiosk using a flexible, enterprise-grade visitor management system to add visitor sign-in steps. This has proven successful in the past when used to control the spread of infectious disease during an outbreak. An example of this is a U.S. children's hospital which managed to reduce facility infection rates by 25 percent over a two-year period using a commercial, off-the-shelf physical identity and access management (PIAM) solution from HID Global. The solution provides two particularly important capabilities that can be used by organisations to protect their workplace from the uncontrolled spread of an infectious disease: Enhance visitor registration policy with additional mandatory questions to help identify any visitors who may need other screenings. Extend the visitor registration kiosk with a mandatory pop-up asking further questions during visitor check-in. 3. Understand who has visited your workplace Successful controlling the spread of infection throughout a facility requires the ability to automatically maintain an auditable trail of activity. This can be done using an enterprise-grade visitor management system that makes it easy to retrieve historical visit reports. This provides a timeline of who was in the workplace, and when they were there. Key features include: A single dashboard providing useful visitor insights at your fingertips. Historical reports that provide visitor details including location and contact information, all in compliance with General Data Protection Regulation (GDPR) and other privacy regulations. 4. Clearly communicate how infection risks can be reduced Global organisations must actively communicate with visitors and employees on the outbreak of infectious diseases and follow best practices outlined by the World Health Organization (WHO). Here are several things organisations can do in this area to help maintain a safe and healthy workplace: Re-enforce and communicate WHO best practices with guideline posters in the front lobby and throughout the workplace. Add posters that also encourage regular and thorough washing of hands. Encourage everyone to cough or sneese into their shirt sleeve in their flexed elbow or cover their mouth and nose with a tissue. Encourage everyone to keep a relatively safe distance from each other and use alternatives to handshakes when saying hello. Organisations must contend with a variety of workplace challenges during the outbreak of an infectious disease. These challenges can be solved with best practices that include a comprehensive visitor management system that automates critical check-in policies and maintains an auditable trail of visitor activity.  

3xLOGIC, PAC/GDX and PACOM, providers of security and access control solutions, have announced they will be exhibiting on stand IF2930 at IFSEC International 2019, which takes place on 18th-20th June at ExCeL, London. For over 15 years as one of the USA’s most respected innovators in server, cloud and artificial intelligence-based solutions, 3xLOGIC has an enviable track record in redefining what’s possible with security technology. After successfully launching into the European market earlier this year, 3xLOGIC will exhibit its diverse range of cutting-edge products as well as demonstrate their integration capabilities. Leading the way is the integration of 3xLOGIC’s NVRs and standalone cameras into PACOM’s GMS and Unison product lines. VIGIL enterprise grade VMS 3xLOGIC’s VIGIL enterprise grade VMS is the driving force behind the VIGIL range of NVRs, DVRs and PoE cameras3xLOGIC’s VIGIL enterprise grade VMS is the driving force behind the VIGIL range of network video recorders (NVRs), digital video recorders (DVRs) and Power over Ethernet (PoE) cameras. To further enhance VIGIL’s suitability for multi-site environments, it has been integrated with the PACOM Graphical Management System (GMS). Engineered to communicate over an IP network, the PACOM GMS allows for full integration of access control, alarm monitoring, video surveillance and many other security functions. 3xLOGIC’s Visix Facial Recognition camera is making its European debut at IFSEC 2019. This special purpose, low cost, dual lens 2MP device is designed for instant face detection, and the identification and notification of persons of interest. Using camera-based analytics and 3xLOGIC’s exclusive facial recognition software and mobile app, users can review images and choose which individuals to place on a watch list. Unison security management Furthermore, 3xLOGIC’s Facial Recognition camera has recently been integrated into PACOM’s Unison security management platform. An open security solution designed specifically for campus-based organisations, Unison is the solution of choice for organisations within vertical sectors such as healthcare, universities, commercial buildings, public facilities, municipalities, airports, shipping ports and data centres. The combination of Facial Recognition capabilities with Unison improves operational efficiency by quickly and accurately identifying persons of interest, and streamlining processes to use this information to meet the organisation’s security and marketing goals. TRENDS empowers the user to interpret vast amounts of disparate data more effectively and efficiently than ever before For those looking to optimise organisational efficiency, 3xLOGIC’s TRENDS cloud-based business intelligence tool incorporates exception-based reporting, video data and third-party applications into an easy to use dashboard that provides a simple visual snapshot of business operations. TRENDS empowers the user to interpret vast amounts of disparate data more effectively and efficiently than ever before, offering unrivalled levels of visibility to quickly spot issues and liabilities that can seriously impact a company’s bottom line. Bluetooth-based card reader Last, but certainly not least, visitors will have the chance to get hands on with the new PAC GDX Bluetooth-based card reader technology, which has been specifically designed to meet the requirements of companies of all sizes that want the most secure access control solution possible. Experts from the company will be available for product demonstrations and to discuss a new online training programme that has been developed to enable installers and end users to get the very best out of their PAC GDX solution. “It has been a tremendously exciting year, and we are looking forward to discussing our activities with those attending IFSEC,” commented Matt Kushner, Global President, Stanley Products and Solutions. “With a combined legacy 
of over 100 years in the security industry, 3xLOGIC, PAC GDX and PACOM lead the way in the design and manufacture of video surveillance, access control, and business intelligence solutions. By visiting Stand IF2930 and talking to our experts, visitors have a fantastic opportunity to find out how our technology can enhance security provision in a diverse range of built environments and how we can help them achieve their operational and security objectives.”

3xLOGIC, Inc., global provider of integrated, intelligent security solutions, and a three-time Deloitte Technology Fast 500 winner, announced that the company has added to its growing North American sales network, along with other personnel moves at its umbrella company, Stanley Products and Solutions (SPS). The company added two new RSMs to further penetrate key markets in the Pacific NW as well as the Mid-Atlantic regions and appointed a new Marketing Manager for the PACOM brand of products. 3xLOGIC adds security expert  3xLOGIC welcomes Joel Dombovy as a Regional Sales Manager (RSM) in the Northwest 3xLOGIC welcomes Joel Dombovy as a Regional Sales Manager (RSM) in the Northwest. Joel comes to the company with 14 years of security industry experience, working with companies such as Interlogix, GE Security, and Honeywell. John Saxen will support Joel as the Inside Sales Account Manager for the region. Jake Franklin takes over as RSM for the Mid-Atlantic. He joins the company from RF Technologies, a safety solutions company in healthcare where he was RSM for the Northeast. Prior to that, he worked as Critical Infrastructure Account Manager & Sales Representative at a security integration company. Jake’s passion for technology and previous security experience make him an excellent addition to 3xLOGIC’s powerful sales team. Bill Hobbs, Global VP of Sales for SPS, announced that both Joel and Jake will report to Jason Bryan, Director of Sales. PACOM expands marketing team Jennifer Joyce is the new Marketing Manager for PACOM, sister company of 3xLOGIC, as the company continues to expand efforts in the North American to market the wide range of PACOM solutions that have found success all over the world. She brings more than 25 years of marketing and design experience to the team. Her global marketing experience began with Firestone Industrial Products and Jennifer most recently spent her time in digital marketing as Marketing Director for Orbis Education. She will report to Suzi Abell, Senior Director of Global Marketing, SPS. Gavin O’Keeffe has been promoted to Director of Product Management Elsewhere in the larger SPS organisation Charlie Erickson has a new title reflecting his growing responsibilities—Chief Technology Officer. He continues to oversee Product Management as his team continues to expand. Reporting directly to Charlie, Michael Poe has been promoted to Director of Product Management. He will be leading the Video, Blue, DIY, and TRENDS products lines. Rick Walker will be aligned under Poe’s leadership.  New PAC, PACOM, infinias head Also reporting to Charlie, Gavin O’Keeffe has been promoted to Director of Product Management, and he will be leading the PAC, PACOM, infinias, and Sonitrol product teams. We also welcome Darren Monroe, Product Manager for infinias to Gavin’s team. Darren will work in the 3xLOGIC office in Indianapolis and Gavin works out of the PACOM Australia office. Drew Alexander continues as Sr. Director of Program Management, and he will continue to add Program Managers to his team to facilitate a growing list of product launches and business initiatives.

3xLOGIC, the provider of integrated and intelligent security solutions, has announced the availability of its pioneering VIGIL video management system (VMS) in Europe. Already enormously popular in the USA, 3xLOGIC aims to replicate this success and is targeting VIGIL at those who want all the power of integrated video and access control, without the stress and cost of a complex set-up. VIGIL’s enterprise grade VMS is the driving force behind the VIGIL range of network video recorders (NVRs) and power over Ethernet (PoE) cameras. Its easy set-up wizard guides installers and end users through the configuration process, helping to define network parameters, system identification information and camera profiles quickly and efficiently. VIGIL Central Management software With 3xLOGIC’s VCM, it is possible to monitor server connectivity, camera status, storage details and server settingsEvents can be viewed via PC or mobile app, allowing users to respond to alarms and view live footage from any location, while SmartSearch functionality enables individuals to quickly identify and review events. With 3xLOGIC’s VIGIL Central Management software (VCM), it is also possible to monitor server connectivity, camera status, storage details and server settings; and 3xLOGIC’s RapidStream technology and SubStream motion detection functionality offers high resolution while substantially reducing bandwidth demands All VIGIL NVRs come pre-configured with VIGIL VMS software and 3xLOGIC PoE-enabled internet protocol (IP) dome, bullet, cube, 360°, thermal imaging, and pan tilt zoom (PTZ) cameras are designed to suit any application. The easy set-up wizard also provides plug and play capability for easy deployment, so no IP video experience is necessary to start recording or viewing video. Integrated with infinias access control solution Advanced reporting features including heat mapping, restricting and locking video are also possibleUsers can easily narrow down points of interest within larger playback clips by creating a SmartSearch mask over an area of an image, and surveillance data can also be routinely archived without the need to perform the task manually. Advanced reporting features including heat mapping, restricting and locking video are also possible. End users are increasingly demanding integrated VMS and access control. VIGIL can be seamlessly integrated with 3xLOGIC’s cutting edge infinias access control solution, which is designed to easily manage any size of project ranging from a single door to an enterprise-wide installation of hundreds of doors. With no wires from VIGIL to infinias, configuration is carried out through software with an automated, cloud-based programming tool. This offers a cost-effective way to create one intuitive solution where video is automatically linked with access control events and alarms. New revenue stream for installers VIGIL opens up a new revenue stream for installers that work primarily with small to medium-sized enterprises Offering a level of functionality previously only available in solutions designed for larger projects, VIGIL removes the need for expensive technical labour. It therefore opens up a new revenue stream for installers that work primarily with small to medium-sized enterprises (SMEs), or who wish to start offering an integration based service. VIGIL is available through the existing PAC channel, with full access to its technical support, meaning that customers can rely on a tried and trusted supply chain that delivers products on time, every time. “The response to 3xLOGIC’s presence in Europe has been phenomenal,” commented David Hughes, the company’s global product manager. “The availability of VIGIL is the next step in our strategy to redefine the way in which security systems are designed, specified and configured across the continent. “Suitable for almost any budget, VIGIL is designed to be fully integrated to provide SMEs with comprehensive, cost effective and state-of-the-art video and access control infrastructures that are easy to manage, simple to install and can scale in line with changing needs.”