New Lumidigm® J110 fingerprint sensors work in the real world
New Lumidigm® J110 fingerprint sensors work in the real world

The J110 is a ruggedised sensor that incorporates Lumidigm’s patented technology.  In a fraction of a second, multiple wavelengths of light coupled with advanced filtering techniques capture images at and below the surface of the skin.  The resulting high-quality fingerprint images virtually eliminate common performance problems due to poor images.  This award-winning sensor also has the industry’s best anti-spoof technology.Designed for the most demanding civil and access control applications, the J110 delivers high-quality, 500 dpi fingerprint images in all environments.  Multispectral imaging provides clean, clear fingerprint images when fingers are wet, extremely dry, or incompletely touching the platen.  By looking below the skin surface, high-quality fingerprint images can be captured even when the individual has little or no surface fingerprint.  This translates to repeatable high-quality fingerprint images that can reduce or eliminate enrollment problems and false rejections making secure high-throughput indoor and outdoor applications a reality.While fake fingers and finger spoofs are a significant risk for fingerprint applications, the J110 eliminates this barrier to deployment.  Readily available spoofs that easily defeat conventional fingerprint sensors such as thin films and prostheses are rendered useless against Lumidigm’s new sensor. Built to withstand the elements and continue to perform all day, every day in the real world, the J110 has a cast aluminum case and NEMA 4 rating and is capable of operating at temperatures from -20o to +70o C with humidity ranging from 10 – 99% RH.

Add to Compare

Browse Access Control Readers

Access control readers - Expert commentary

Wireless technology is transforming motion detection
Wireless technology is transforming motion detection

Motion detection is a key feature of security systems in residential and commercial environments. Until recently, systems have relied heavily on closed circuit television (CCTV) and passive infrared (PIR) sensors, which both require significant investment and infrastructure to install and monitor. Developments in wireless technology are increasing home security possibilities. Few years ago, these developments led Cognitive Systems to discover that the wireless signals surrounding oneself can be used to detect motion. Known in the wireless industry as WiFi sensing, this technology brings many benefits that other motion detection solutions have not been able to provide. The working of WiFi sensing At Cognitive Systems, the company has used WiFi sensing technology to develop a motion detection solution called WiFi Motion™, which measures and interprets disruptions in RF signals transmitted between WiFi devices. When movement occurs in a space, ripples in the wireless signals are created. WiFi Motion interprets these ripples and determines if an action, such as sending a notification, is needed. Enabling this functionality in a space is incredibly simple. With a software upgrade to only one’s WiFi access point (or mesh router), motion sensing capabilities are layered into one’s WiFi network. Existing connected WiFi devices then become motion detectors without detracting from their original functions or slowing down the network. Using artificial intelligence (AI), WiFi Motion establishes a benchmark of the motionless environment and learns movement patterns over time, which could be used to predict trends. This allows unusual movement patterns to be detected with greater accuracy while decreasing the potential for costly false alerts. WiFi Motion requires no line-of-sight or installation WiFi sensing and other home monitoring solutions All of these capabilities are made possible by WiFi sensing and together create a motion detection system that provides unparalleled accuracy, coverage, privacy and affordability compared to other solutions on the market. PIR integration is far more complex and imposes electronic and physical design restrictions compared to WiFi sensing. In terms of placement, PIR systems are difficult to install, requiring line-of-sight and a device in every room for localisation. WiFi Motion requires no line-of-sight or installation and is also a scalable solution compared to PIR. Much like cameras, PIRs can only cover so much space, but WiFi Motion can cover the entire home and even detect motion in the dark and through walls, without adding additional devices to the home. WiFi Motion detects less distinguishing context than cameras and microphones, but more context than regular PIR sensors for the perfect balance of privacy and highly accurate motion detection. Privacy solution While cameras have been the security solution for years, WiFi Motion offers a more affordable solution that can rival the privacy and coverage capabilities of even the most high-end cameras. With such a wide coverage area, one might think that WiFi sensing infringes on privacy, but actually, the opposite is true. With WiFi Motion, the contextual information collected cannot be used to identify a specific individual, unlike cameras which can clearly identify a person’s face or microphones, which can identify a person’s voice. It is different from other smart home security options that use cameras and microphones because it only senses motion using WiFi signals - it doesn’t “see” or “listen” like a camera or microphone would. This provides opportunities for added security in spaces where privacy might be a concern and installing a camera may not be a comfortable solution, such as bathrooms and bedrooms. The data collected is also anonymised and highly encrypted according to stringent industry privacy standards. Existing connected WiFi devices then become motion detectors Additional WiFi sensing applications Since WiFi sensing technology requires no additional hardware or subscription fees, it is much more affordable than other motion detection solutions. It can be used as a standalone solution, or it can be easily layered into more complex systems. This ease of integration, scalability and relatively low cost brings a lot of potential for various applications. Motion detection can trigger other smart devices in the network to turn lights on or off In eldercare, for example, WiFi sensing can be used to help seniors live comfortably in their homes for as long as possible. With the increasing aging population and high costs associated with care homes, the market for this application is considerable. Caregivers can use an app to monitor movement in their loved one’s home and be alerted about unusual movement patterns that could indicate a concern. For smart homes and other environments that have a network of smart devices, the artificial intelligence (AI) component of the technology allows for improvements to automated features. Motion detection can trigger other smart devices in the network to turn lights on or off or make adjustments to the temperature in a room. Security for the commercial sector For office buildings and other commercial properties, it is easy to see how all of these features could be scaled up to offer a highly accurate and cost-effective motion sensing and smart device automation solution. Cognitive Systems is closely involved with the development of WiFi sensing technology, working with various industry groups to establish standards and help it reach its full potential. WiFi Motion is merely the tip of the iceberg in terms of motion sensing possibilities, but its applications in the world of security are undeniably compelling. It is an exciting time for the wireless industry, as one works with stakeholders in the security space to explore everything this technology can do.

The growth of the mobile access card market in 2020
The growth of the mobile access card market in 2020

The emergence of smartphones using iOS and Android is rapidly changing the landscape of the IT industry around the world. Several industries, such as digital cameras, car navigation, MP3, and PNP, have been replaced by equivalent or even better performance using smartphones. Smartphones provide increasing portability by integrating the functions of various devices into a single unit which allows them to connect to platforms with network-based services and offer new services and conveniences that have never been experienced before. These changes have expanded into the access control market. Although not yet widespread, ‘Mobile access cards’ is one of the terminologies that everyone has been talking about. RF cards used for access security are being integrated into smartphones just as digital cameras and MP3s were in the past. While people might forget their access cards at home in the morning, they seldom forget their smartphones. Using smartphones for access control increases entry access reliability and convenience. Mobile/smartphone access control A key aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction As in other markets, the combination of smartphones and access cards is creating a new value that goes beyond the simple convenience of integration enhancing the ability to prevent unauthorized authentication and entrance. People sometimes lend their access cards to others, but it is far less likely they might lend their smartphone with all their financial information and personal information – to another person. This overcomes an important fundamental weakness of RF cards. Another valuable aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction. Under existing access security systems, cards must be issued in person. Since card issuance implies access rights, the recipient’s identification must be confirmed first before enabling the card and once the card has been issued, it cannot be retracted without another separate face-to-face interaction. Mobile access cards In contrast, mobile access cards are designed to transfer authority safely to the user's smartphone based on TLS. In this way, credentials can be safely managed with authenticated users without face-to-face interaction. Mobile cards can be used not only at the sites with a large number of visitors or when managing access for an unspecified number of visitors, but also at the places like shared offices, kitchens and gyms, currently used as smart access control systems in shared economy markets. The market share of mobile access cards today is low even though the capability can offer real benefits to users and markets. While the access control market itself is slow-moving, there are also practical problems that limit the adoption of new technologies like mobile access cards. Use of Bluetooth Low Energy technology While NFC could be an important technology for mobile credential that is available today on virtually all smartphones, differences in implementation and data handling processes from various vendors prevents universal deployment of a single solution to all devices currently on the market. Accordingly, Bluetooth Low Energy (BLE) has been considered as an alternative to NFC. Bluetooth is a technology that has been applied to smartphones for a long time, and its usage and interface are unified, so there are no compatibility problems. However, speed becomes the main problem. The authentication speed of BLE mobile access card products provided by major companies is slower than that of existing cards. Enhancing credential authentication speed Authentication speed is being continuously improved using BLE's GAP layer and GATT layers The second problem is that mobile access cards must be accompanied by a supply of compatible card readers. In order to use mobile access cards, readers need to be updated but this is not a simple task in the access control market. For 13.56 MHz smart cards (which were designed to replace 125 kHz cards), it has taken 20 years since the standard was established but only about half of all 25 kHz cards have been replaced so far. Legacy compatibility and the need for equivalent performance, even with additional benefits, will drive adoption timing for the Access Control market. While BLE technology helps resolve the compatibility problem of mobile access cards, it can identify some breakthroughs that can solve the speed problem. Authentication speed is being continuously improved using BLE's GAP layer and GATT layers, and new products with these improvements are now released in the market. Making use of key improvements allows Suprema's mobile access card to exhibit an authentication speed of less than 0.5 seconds providing equivalent performance to that of card-based authentication. AirFob Patch MOCA System's AirFob Patch addresses the need for technological improvements in the access control market in a direct, cost effective, and reliable way – by offering the ability to add high-performance BLE to existing card readers – enabling them to read BLE smartphone data by applying a small adhesive patch approximately the size of a coin. This innovative breakthrough applies energy harvesting technology, generating energy from the RF field emitted by the existing RF reader – then converting the data received via BLE back into RF – and delivering it to the reader. By adding the ability to use BLE on virtually any existing RF card reading device, MOCA allows greater ability for partners and end users to deploy a technologically-stable, high performance access control mobile credential solution to their employees, using devices they already own and are familiar with. Adding MOCA AirFob Patch eliminates the need to buy and install updated readers simply to take advantage of mobile credential, lowering costs and risks, and increasing employee confidence and convenience. Growth forecast of mobile access card market in 2020 In 2020, forecasts show that the mobile access card market will grow far more rapidly Several companies have entered the mobile access card market, but they have not set up a meaningful product solution stream until 2019. In 2020, forecasts show that the mobile access card market will grow far more rapidly. Reviewing new entries into the market allows identification of the latest products that provide improving solutions to compatibility and speed problems. MOCA AirFob Patch addresses development plans in process today that overcome the legacy installed base of card readers – allowing rapid creation of an environment that can make immediate use of BLE mobile access cards. Integrated mobile digital ID With proven usability and within suitable environments, mobile access cards will also begin to make inroads into other markets, not just the access control market. In the sharing economy market, which seeks access management without face-to-face interaction, the integrated mobile digital ID led by the 'DID Alliance' will serve as a technical tool that can be used in access authentication – forging increasing links between the access control and digital ID markets.

Entrance control vs access control: similarities and differences
Entrance control vs access control: similarities and differences

Entrance control and access control - of the physical kind - are common terms in the security industry which are often used interchangeably, but should they be? Having worked both sides of the fence, with previous roles at TDSi and HID and now the Major Accounts and Marketing Manager at Integrated Design Limited, Tony Smith highlights the subtle but important differences between these two terms and the systems they refer to, outlining how they should work together to achieve optimal security. Access control is a system which provides discriminating authentication Access control provides a discriminating authentication process and comprises the software or hardware that defines the criteria for acceptance or denial Used to describe a system which performs identification of users and authentication of their credentials (deciding whether or not the bearer of those credentials is permitted admission) access control is an incredibly broad term. Access control provides a discriminating authentication process and comprises the software or hardware that defines the criteria for acceptance or denial of an individual to a restricted area. Entrance control – such as security turnstiles - takes the output of that validation and has the capability to see whether that criteria is being adhered to, either granting or denying access as appropriate. Entrance control is the hardware responsible for keeping people honest If access control verifies authorised personnel using their credentials – their face, fingerprints, PIN number, fob, key card etc – and decides whether or not they are permitted access, entrance control is the hardware which enforces that decision by making users present their credentials in the correct way, either opening to allow pedestrian access or remaining closed to bar entry and potentially raising an alarm. For example, a card reader acts as an access control device, recognising the card holder as having the correct permissions and saying ‘yes, this person can pass’. But, it’s the entrance control system – a turnstile, for example – which actually physically allows or denies access. Physical access and video surveillance Some entrance control systems don’t feature a physical barrier, however. Fastlane Optical turnstiles will not physically stop an unauthorised person from passing through, and instead alarm when someone fails to present valid credentials, alerting security staff that a breach has occurred. These kinds of turnstiles are suited to environments which just need to delineate between the public and secure side of an entrance, with less need to physically prevent unauthorised users from entering. State of the art access control integrations have been installed for award-winning complex, The Bower It’s also possible to capture video footage of any incidents, allowing security personnel to identify users failing to abide by the access control system’s rules, using It’s also possible to capture video footage of incidents, allowing security personnel to identify users failing to abide by access control system rules the footage to decide on the level of response required. The breach could have been the result of a member of staff being in a hurry and failing to show their card before passing through, in which case they can be reminded about the security protocol. Or, it could be an unidentified person who needs to be escorted from the premises. Entrance control and access control working together For optimum security, access control and entrance control should work together, with the entrance control system enhancing the use of the access control system, making it more efficient and better value for money. The two can’t effectively operate without each other. Security turnstiles, for example, require something to tell them that someone is about to enter – the access control system does this – and, the access control system needs a method of stopping people when they don’t badge in correctly. The two systems are complementary.

Latest Lumidigm news

ISC West 2019 day two: Explaining the new and the tried-and-true
ISC West 2019 day two: Explaining the new and the tried-and-true

There are many new technologies at ISC West this year. There are also some tried-and-true solutions on display. More mature products have the benefit of being fully vetted and battle-tested, which may make them a more comfortable choice for security customers. I had a couple of discussions on Day 2 of the show about the advantages, and possible drawbacks, of new products. “To a security director, when you say ‘new,’ he translates that into ‘risk,’” says Bill Spence, VP of Sales, U.S., Canada and Western Europe for HID Global’s Lumidigm biometrics brand. “Anytime you say new, there is a probability of risk. The key is to educate. Education quantifies risk, and an educated customer can make an intelligent decision about risk versus reward.” “We have to take customers from where they are to help them understand new technologies,” says Spence. “We must give them a bridge to that understanding, and education is the bridge.” Lumidigm biometrics integrations An app provides graphics that take installers step-by-step through the installation process HID Global is incorporating Lumidigm biometrics into the new iClass SE RB25F fingerprint reader being highlighted at the show. Two-factor authentication can use either a card or mobile credential along with biometrics; there is no latency; and templates can be stored on a card. Another new offering at the HID Global booth is an augmented reality tool to simplify installation of newer systems that incorporate the more secure OSDP protocol. An app provides graphics that take installers step-by-step through the installation process. Also highlighted at the HID Global booth — and at the booths of turnstile manufacturers throughout the show — are embedded readers that provide tested and certified mobile access control for turnstiles. IClass SE technology is embedded in the iRox-T Turnstile Reader from Essex Electronics. Innovative security technologies There’s a delicate balance at any trade show between creating excitement about new products and educating customers to be comfortable with new technologies. There is some of both at ISC West 2019. In the future, hardware will be a delivery device, not the core of systems “We are on the cusp of change in the industry, and it’s closer than ever,” says Jennifer Doctor, Johnson Controls’ Senior Director, Project Management - Intrusion. “We will see the impact of promised technologies that will come from other industries, such as artificial intelligence. The very definition of security is changing. We are an industry that needs to be risk-averse, and we need to prove out the technology. There is innovation, but we just need to make sure technologies are what the market wants and expects.” “In the future, hardware will be a delivery device, not the core of systems, which will come from intelligence in the software and from services,” she adds. “The products we deliver will enable that.” Have 30 percent of service companies in the U.S. security market jumped into the cloud?  PowerSeries Pro intrusion portfolio Johnson Controls is highlighting the commercial PowerSeries Pro intrusion portfolio, which features PowerG encrypted technology that enables wireless systems that are cyber-secure. The cloud is coming on strong, and one company finding success in cloud systems is Eagle Eye Networks, which has seen 93% compounded annual growth over the past three years. Economies of scale have enabled them to lower subscription prices by 35%, with an extra 10% decrease for customers that pay annually. Ken Francis, President of Eagle Eye Networks, says they are signing up 50 new dealers a month for the cloud video offering. Francis estimates that 30 percent of service companies in the U.S. security market have jumped into the cloud “It’s really heating up,” says Francis. “The general cloud is driving increases in the surveillance cloud.” Jumping to cloud Embracing the cloud and recurring monthly revenue (RMR) requires that dealers transform their businesses to ensure success. Francis says dealers should dedicate sales resources to cloud offerings rather than expect everyone to sell the cloud, and there should be a base commission plan on RMR services in lieu of upfront project fees. March Networks is also showing integration of video with the Shopify cloud-based point-of-sale (POS) system “Talk to professionals about your cash flow and understand how to capitalise on financing partners to ensure cash flow while investing in the RMR stream,” he adds. “And look for ways to reduce your costs to serve the customer base as your RMR increases.” For example, use of remote site diagnostics, configuration and support can avoid the need for expensive “truck rolls” that can undermine profitability. Francis estimates that 30 percent of service companies in the U.S. security market have jumped into the cloud. Alarm companies, which are accustomed to the RMR model, are generally ahead of the curve, while traditional security integrators are lagging. “It’s a requirement to change or die,” he notes. Insight hosted managed service Also, in the area of managed services, March Networks is highlighting its Insight hosted managed service that can provide instant information on video systems located at remote sites, including visibility into firmware versions, camera warranty information, and cybersecurity status of systems. The ability to dive deeply into system status empowers a new recurring revenue stream for integrators. Color-coded icons summarise system status and show pending issues and clicking on the icons provides detailed workflow information. The system can also be offered for smaller systems such as those at convenience stores and quick-serve restaurants. March Networks is also showing integration of video with the Shopify cloud-based point-of-sale (POS) system. The integration enables managers to evaluate POS information, especially anomalies, to determine possible employee theft and other shrinkage issues.

Laidlaw Security Systems’ products integrate with Invixium biometric readers
Laidlaw Security Systems’ products integrate with Invixium biometric readers

The Invixium biometric readers combine sophisticated matching algorithm at 10,000 matches per second Laidlaw Security Systems’ commitment to innovation and quality has been demonstrated yet again with the announcement that it is fully integrating Invixium biometric readers into its products. Invixium, a world-class manufacturer of next-generation biometric products, is a system that is based on smart innovations and functionality. Cutting-edge technology This cutting-edge technology will be included in Laidlaw’s security portfolio of products, enabling customers to benefit from a seamless, fully integrated system that provides some of the highest levels of protection in a wide range of applications. Stuart Griffiths, Laidlaw Security Systems’ UK Sales Director, said: “This is an exciting development for Laidlaw. By integrating technology from Invixium, one of the world’s leading manufacturers of premium biometric systems, into our security systems, we are able to offer our customers robust, future-proof products of the highest quality.” “We pride ourselves at being at the forefront of innovation when it comes to our security systems and partnering with Invixium will undoubtedly give us the edge. Its revolutionary technology is the perfect complement to our product portfolio.” Orbis door controller "By integrating technologyfrom Invixium into our security systems, we are able to offerour customers robust, future-proof products of the highest quality" Invixium is integrated into Orbis, Laidlaw’s ground-breaking, licence-free software that offers unparalleled features for any access system. Orbis also includes premium features, including alarm processing, card format decoding, and device management as standard. The Orbis door controller, the world’s first native PoE/PoE+ BACnet access control unit, is also available from Laidlaw.The Invixium biometric readers combine sophisticated matching algorithm at 10,000 matches per second along with multispectral fingerprint sensor technology supplied by Lumidigm, which maximises performance and return superior quality images. The sensors detect the subsurface fingerprint, which increases biometric performance and enhances the throughput and accuracy of any application, even for the 2-5% of the population who have problem fingerprints that fail to enrol on conventional sensors. The result is close to zero failure to enrol rates.In addition to being the first biometric product developed on the Android platform, Invixium products are equipped with industry-leading trusted technologies. These include capacitive touchscreen LCD with antimicrobial Corning Gorilla Glass, presence detection, IP65 rating, power over Ethernet (PoE), and HID’s iCLASS SE card reader, making them the most modern and exquisitely designed biometric offerings on the market today.“Biometric access control is the future,” says Shiraz Kapadia, CEO and President of Invixium. “In addition to incorporating various technologies and feverish focus on quality, we give paramount importance to design and usability. We are delighted with Laidlaw’s decision to incorporate our innovative biometric products into its Orbis software platform, providing a great opportunity for its customers to upgrade existing installations with biometric access control seamlessly.”

Mexico Government's SEMARNAT branches select ANVIZ biometric solution to control building access
Mexico Government's SEMARNAT branches select ANVIZ biometric solution to control building access

Anviz OA1000 Mercury Pro provides fast, accurate verification of fingerprint and Mifare card SEMARNAT (Mexico Government institution, Secretariat of Environment and Natural Resources) Mexico's environment ministry is charged with the mission of protecting, restoring, and conserving the ecosystems, natural resources, assets and environmental services of Mexico with the goal of fostering sustainable development. DR Security is a company highly recognised in the field of solutions, integrations and services in the field of security technology, concentrating on new technologies, achieving and maintaining the highest quality. It is always maintaining an ethical interaction between customers, companies and employees within it. Solution offices SEMARNAT has 40 branches and 2000 employees nationally. The principal office is located in Mexico City that manages 40 branches in other cities. And more than 2000 users need to access their different branch buildings everyday, so there are two identification modes required on the integrated system consisting of the visitor only with card identification mode and employee with card and FP identification mode. Every two OA1000 Mercury Pro controls one Single Lane Flap Barrier. When employees punch card and place the FP to get access granted, the single lane flap barrier will open. OA1000 Mercury Pro with FP identification function increases the security level, and makes it the ideal choice to build intelligent and secure Access Control Application System. Anviz OA1000 Mercury Pro DR Security integrated Anviz OA1000 Mercury Pro after strict testing and evaluation with ANVIZ R&D professional support team. Due to its highest quality and performance of OA1000 Mercury Pro with very fast, accurate verification of fingerprint and Mifare card, also high quality Mercury Sensor from Lumidigm USA, finally they chose this solution as the best solution. OA1000 Mercury Pro is one of Anviz fingerprint flagship models, based on the Linux operating system, with features of dual-core high-speed CPU; large memory support; and 1: 30000 matching high speed in less than 0.5 seconds. Multiple communication modes are available: TCP/IP, WIFI & 3G optional. Its built-in webserver allows fast, easy access to the device settings and record searching. Benefits of the Anviz solution After the installation of OA1000 Mercury Pro integrated with the single lane flap barrier, Mexico government SEMARNAT had received users’ positive feedback and realised real-time monitoring the employees or visitors’ entry/exit buildings, improved office security level, saved labour cost to maximum. Meanwhile, other institutions of Mexico government are interested in this and wish to apply this security system.

Related white papers

11 considerations for embedded system RFID readers

RFID and smartphone readers in physical access control

3 reasons to migrate to a new access control system