Hanwha Techwin America Access Control Accessories(1)
Browse Access Control Accessories
Access control system accessory products updated recently
Gallagher HBUS End of Line Module monitors communications between alarm sensors and controller technology
Gallagher I/O Accessory Single Cabinet - secure enclosure providing one footprint for Gallagher devices
The physical security market continues to experience growth as users look to capitalise on the promises of emerging technologies and because of this, 2017 proved to be a great year for Oncam. In fact, this year was the best year in Oncam's history in terms of sales, as 360-degree fisheye cameras have gone from being a “specialty” camera used only in certain applications to a primary device for enabling total situational awareness. Today, many of our customers leverage 360-degree cameras exclusively to provide extensive coverage inside a facility or in a large outdoor area, with traditional narrow field-of-view cameras used only at “choke” points. Increase in cybersecurity threats and breaches At the end of 2016, we predicted a major trend this year would be an increase in cybersecurity concerns for users of physical security systems, and we were right. An increase in cybersecurity threats and breaches have put organisations on watch. Based on this and the adoption of more IT-centric infrastructure and protocols, there is significant collaboration between IT and physical security, and true “convergence” is finally starting to happen. The adoption of video analytics also continued to increase this year, as most video surveillance projects involved the use of some form of analytics and data analysis. Demand for safeguards As we move into 2018, the trends of 2017 will roll over, and cybersecurity will continue to be a major issue. Suppliers of hardware and software will put an even greater emphasis being cyber secure and end users will increasingly demand safeguards. Additionally, the deployment and use of advanced analytics based on newer artificial intelligence-based technologies will continue to increase. It will be the technology providers that find ways to allow users to capture additional value from the information collected by security systems that will accelerate growth. Oncam made significant investments in new products that leverage analytics and cloud technologies. In 2018, we will continue to invest in the development of new products, with a focus on solutions for particular applications across industry segments. Beyond our technology advancements, we've invested significantly in boosting our sales force in the Americas and adding industry experts to ensure sustained customer and partner success with our solutions. From our vantage point, Oncam is well positioned to capitalise on opportunities for growth in the coming year.
2017 was quite an interesting and eventful year for the physical security industry. The economy has been robust and technology has become progressively sophisticated—with interactive services, cloud computing and network-based solutions taking charge to provide new insights to installers and their end-user customers. The Internet of Things is creating increasingly integrated solutions, with a heightened emphasis on total connectivity. Changing security expectations World events have also put the spotlight on the need for comprehensive security at public events, tourist attractions and schools and campuses. Security is an expectation and systems integrators are becoming trusted advisors to their customers, who are looking to them to solve problems or issues. Residential systems are more robust and now, are migrating to the commercial side of the business. There’s a blurring of the lines of technology—many of the products that come to the security industry originate from the consumer side. This proposition is also changing expectations by both residential and commercial customers, who want common, easy operation from their smartphone or user interface. Unexpected was some of the biggest deals in the industry, including acquisitions by dominant companies who grew even larger and continued ongoing consolidation on the manufacturing side. Those who remain will need to be progressive and step up their game with the latest proven technologies. Selling hardware isn’t the end game any longer. It’s providing solutions that generate revenue for security dealers and offer a solid return on investment for the end-user. In addition, solutions need to be easier for the user, and integrate many different systems and components across the enterprise. Cybersecurity safeguards End users want to get the most out of their solutions—and they want to be able to have more than safety and security. They are looking for the types of products that yield insights into system performance and give them the data the need for greater control and to proactively address any challenges or problems before they occur. Downtime is not an option and therefore, there’s an increased emphasis on consistent power so solutions are always on and running reliably. For security dealers and integrators, physical security and cybersecurity services will be part of their offerings and no longer separate disciplines Cybersecurity is a dominant conversation in the security industry these days and that buzz will continue into 2018. Because solutions are increasingly network connected, they have vulnerabilities that will have to be addressed by service providers and manufacturers. Manufacturers will need to take the upper hand in providing hardened products—testing and certifying for cybersecurity safeguards. That is not an easy task and can be expensive, but it needs to be done. Because cybersecurity is in constant evolution, many will go the route of outsourcing this component of their manufacturing to third parties well-versed in threat detection and hardening. Hardened products will also need to evolve with new emerging attacks. For security dealers and integrators, physical security and cybersecurity services will be part of their offerings and no longer separate disciplines. Intelligent access control solutions Manufacturers no longer operate in silos. They are working with systems integrators to more fully understand their needs and those of the end-user. Manufacturers are also partnering with technology providers—bringing in the expertise of others so their solutions are comprehensive and holistic. We will continue to see integration of formerly disparate components, open systems and open APIs. There will also be strong migration to access control systems with edge intelligence and power over Ethernet, leveraging existing cabling for network connectivity. The winners will be those who take the lead in providing cyber secured and hardened products, as well as companies who partner with others to bring best of breed solutions to market. The losers will be those who continue to develop proprietary, closed systems and fail to recognise the importance of network connectivity for real-time, proactive reporting. Without networked power, the facility cannot yield the proper insights it needs to stay reliably connected 24/7 Ongoing partner success LifeSafety Power® has been working consistently and diligently on elevating the status of power from unintelligent hardware device to network-connected component that yields rich data for the user and allows the installer to provide remote monitoring and managed power services. We have changed the paradigm of power but there’s additional work to do to get people to understand the new, critical role power plays in comprehensive enterprise and campus security. Now, security installers can help the end user know what’s happening with locks, access control, gates or other connected solutions and fix problems before they happen. Without networked power, the facility cannot yield the proper insights it needs to stay reliably connected 24/7. We have also had continued, ongoing successes with our many partners in the access control community and that’s where we will further focus our efforts in 2018—working with leading security solution providers to present the best technologies and solutions that are reliable, certified and present the types of insights security dealers need to offer customers to provide the highest levels of service. This will also help security dealers and integrators differentiate themselves and compete more effectively in the crowded marketplace.
Part 1 in our Intercoms in Security Series Lambert-St. Louis International Airport uses Code Blue intercoms Organisations are demanding a new level of interoperability among mission-critical security systems. Intelligible audio, the ability to hear, be heard and be understood, is critical to communication, which is essential to the core security processes within an organisation, as well as to emergency situations. Intelligible audio provides a platform to optimise various processes, including the use of security officers. “Our main thrust is to ensure our clients see intelligible and interoperable audio, not as an option, but as instrumental to their budget optimisation, stakeholder communication and risk mitigation efforts,” says Jim Hoffpauir, President of Zenitel North America, a manufacturer of intercoms and other communications solutions. Iintercoms in building safety and security The role of intercoms in building safety and security is a given across many markets, and that use is growing. Intercoms are used in campus call boxes, elevators, muster locations, and for emergency notification. The trend is toward video, audio and access control, all tied together. There is also an emphasis on providing intelligible audio in any environment, even demanding ones. The education market has historically been a large sector for intercoms. Emergency phones and intercoms traditionally have been found throughout education settings, including colleges and universities, where they remain quite popular. Expanding markets for two-way communication In recent years, however, their popularity has also grown within the healthcare and mass transit sectors, where their versatility allows authorities to react to emergency situations while also providing a wide range of applications for non-emergency situations, such as car trouble or requests for directions. Intercoms can fulfill a variety of emergency and non-emergency needs in places like downtown Santa Ana, California (Photo courtesy Code Blue) “Markets of all sizes and shapes can benefit from a two-way communication solution that can help individuals place calls for assistance with first responders, police departments or customer service representatives,” says David Fleming, Chief Design Officer for Code Blue Corp. Intercoms for public and private sectors Aiphone is another intercom manufacturer for which education is a big market. Bruce Czerwinski, U.S. General Sales Manager, Aiphone Corp., says about 80 percent of both public and private K-12 and higher education campuses are using at least one intercom in some form. That percentage grows to nearly 100 percent for hospitals, which are using intercoms as nurse-call stations and at parking facilities, exterior door entries, nurseries and pharmacies, he says. "About 40 percent of commercial units – from strip malls to large, multi-tenant campus settings – are using intercoms" Up to 70 percent of larger multi-family facilities are also using intercoms. And that percentage is even higher in older, heavily populated Eastern cities. Many locales have laws mandating the use of audio and video intercoms on buildings beyond a threshold number of units. About 40 percent of commercial units – from strip malls to large, multi-tenant campus settings – are using intercoms, says Czerwinski. In the past year, Aiphone’s emergency stations have become very popular, particularly in campus settings; both commercial and higher education. Also, a growing number of unmanned parking garages are using the stations to allow patrons to immediately reach first responders or security personnel. Each of these markets still has growth potential, but by its sheer size, the commercial market offers the greatest opportunities, according to Aiphone. Video-enabled IP intercoms Intercom usage differs widely in various global markets, according to Craig Szmania, CEO of 2N USA, a manufacturer of IP intercoms. In the North American market, intercom usage is relatively low compared to the Europe, Middle East, and Africa (EMEA) region, where intercoms are a more mature market. Security, convenience, systems integration and IP-versus-analogue adoption are driving usage and growth to more than 20 percent year-over-year. More and more video-enabled IP intercoms are seen as an integral part of a system wide security and video solution, according to Szmania. “Our intercom portfolio targets all the major verticals, but we have had particular success in the education sector – K-12 and universities,” says Szmania. “These end users are looking for specific features in securing their campuses, providing convenience to their administrators, employing programmability for differing use scenarios throughout the campus, and integration to their telephony or other systems.” More and more video-enabled IP intercoms are seen as an integral part of a system wide security and video solution Szmania says the latter point is becoming a particular need in light of a requirement for campus-wide communication and coordination in emergency situations. “Our intercoms integrate seamlessly with third party solutions such as Cisco’s telephone systems that are the communication backbones of many schools and campuses,” he adds. IP-based solutions in residential verticals Considering near-term growth potential, single family and multi-tenant residential verticals have fantastic opportunities for increased usage of door stations/intercoms in the United States, according to Szmania. The company has entered this space over the last several years and has grown to be a market leader in IP-based integrated solutions, especially in the home automation space. The adoption of IP networked solutions for condominiums and apartments is just taking off, driven in part by consumer demand for mobile-anywhere video, audio and door control. The service is also a driver for integrator/dealer adoption of the technology to provide recurring monthly revenue (RMR). 2N has also achieved triple-digit growth in commercial building installations over the past two years. Building owners, IT departments and security managers want and need a networked solution for control and security. 2N’s open platforms are a good fit, says Szmania. Read part 2 of our Security Intercoms series here
Delivering on high expectations, the first day of ISC West 2019 kicked off with a crowded Sands Expo Center and exhibitors putting forward their best new technologies. Developments seemed more evolutionary than revolutionary, but attendees quickly found plenty of interest. Thermal cameras Hanwha Techwin also showed off a new Android camera that can deploy new apps The largest booth at ISC West, Hanwha Techwin, remained crowded throughout the first day as attendees checked out the company’s eight new thermal cameras offering features such as pan-tilt-zoom, H.265 encoding to minimise storage needs, VGA resolution and detection of temperature changes, all built on Hanwha Techwin’s Wisenet chip. There is also a new 5-megapixel version of Hanwha’s popular 2-megapixel multi-sensor camera, and a new panoramic camera; multi-sensor panoramic cameras ‘stitch’ the images together rather than just aligning them. Hanwha Techwin also showed off a new Android camera that can deploy new apps developed as part of the Korean company’s role as a founding member of Open Security & Safety Alliance (OSSA). Avigilon's H5 series Avigilon is introducing a new line of cameras — the H5 series — with improved imaging and designed to provide deep learning/neural network processing at the edge. Improvements to video analytics will enable the cameras to track multiple moving objects simultaneously in a field of view and to track objects more accurately. More granularity enables better differentiation among types of vehicles, and the cameras enable more detailed data to be pulled from video. The improved analytics engine will also support better face detection and recognition. Operators can view the dashboard and react to information provided in a more digestible format The new version of Avigilon Control Center 7 (ACC7) software will apply principles of AI to enhance an operator’s ‘Focus of Attention’ when monitoring live video. Video is fed into an AI engine that determines which events in the live footage are most worthy of an operator’s attention. Monitoring live video can be a challenge for human operators, whose short attention spans undermine the best surveillance systems. Automation helps to direct that limited attention span to events most worthy of attention. A ‘dashboard’ displays clusters of cameras that are colour-coded to reflect the types of activity that are detected. Rather than watching video, operators can view the dashboard and react to information provided in a more digestible format. Clicking brings up the live video. Quantum Cloud Storage Platform Video storage is another area of innovation at ISC West. The Quantum Cloud Storage Platform is flexible for video surveillance and industrial IoT applications. The architecture is built from the ground up for video surveillance applications and can scale from five cameras to millions of cameras in a simple deployment model — no settings or configurations needed. Products range from a small ‘mini-tower’ configuration for a retail store or gas station up to rack-mount servers that can accommodate thousands of cameras. We make the storage piece so simple that you don’t have to think about it" Quantum introduced the VS-Series in a range of server choices at ISC West. The hyperconverged and software-defined environment will support a combination of video management systems (VMS), along with access control, HVAC and lighting controls. Quantum worked with Johnson Controls to develop the products. “It’s designed for an installer, not for an IT guru,” says Jamie Lerner, Quantum’s CEO, President and Chairman of the Board. “We make the storage piece so simple that you don’t have to think about it.” Quantum is showing its VS-Series publicly for the risk time at ISC West. S2’s Magic Monitor LenelS2 is a newly coined name in the industry — resulting from a recent acquisition. The combination of Lenel and the acquired S2 is playing out to the benefit of both product lines. For example, Lenel’s Blue Diamond mobile credentialing system can now be used along with the S2 Netbox hardware. Lenel’s OnGuard is being combined into S2’s Magic Monitor unified solution that combines video, access control, and digital messaging. OnGuard is also benefitting from Magic Monitor’s graphics maps. The S2 Cumulus cloud-based service, focused on system health monitoring, is being applied to OnGuard. LenelS2 is also developing a full commercial access control as a service (ACaaS) offering The combined LenelS2 is stepping up with new solutions for frictionless access control, too. A ‘phone as a badge’ approach enables a door to be unlocked by a smart phone, even if it is in a pocket, locked and/or the app has not been opened. Another alternative is a ‘shake to open’ action that sends the credential to the nearest reader. LenelS2 is also developing a full commercial access control as a service (ACaaS) offering, which is being previewed at ISC Show and will be released commercially later in the year. Video surveillance product line Mobotix is expanding its MOVE video surveillance product line with six new models announced at the show and broadening its reach into new vertical markets. A solutions approach offers both end-to-end Mobotix systems and other systems offered in conjunction with technology partnerships displayed in the Mobotix booth. Top of the list of new verticals is education, and Mobotix’s edge-based approach includes programmable logic built in so that ‘technology can take over when the human element is the weakest.’ Automated response is faster and ‘seconds equal lives’ during an emergency. In an education scenario, the Mobotix system acts as an Internet of Things (IoT) device that offers more functionality than other manufacturers’ ‘cameras.’ There are 22 steps involved to ensure the cybersecurity of Mobotix products, reflecting a higher level of cybersecurity commitment Mobotix has thermal products that are also finding uses in a variety of verticals, from oil and gas to manufacturing process control. Mobotix systems that can detect defects in products in the manufacturing process are expanding usage in applications beyond the traditional ‘security’ industry. Cybersecurity Commitment Mobotix is looking at the market in a completely different way, redefining how their products can fit into a variety of scenarios, and with a focus on cybersecurity. There are 22 steps involved to ensure the cybersecurity of Mobotix products, reflecting a higher level of cybersecurity commitment than some other manufacturers. “There are so many features within our solutions, and we want to get the word out to the end users, so they understand the features,” says Thomas Lausten, Mobotix CEO. “There is untapped potential.”
Safety and Security Things GmbH (SAST) will be both a first-time exhibitor at ISC West and also feature a larger booth – 1,800 square feet. The Bosch startup is looking to make a big splash in its first-time appearance at the largest security trade show in the United States. The International Security Conference & Exposition (ISC West) will be held April 10-12 at the Sands Expo in Las Vegas. Founded in September 2018 and based in Munich, Germany, SAST is building a new Internet of Things (IoT) ecosystem for the security and safety industry, including an app store, an open and secure camera operating system, a software developer environment, and a portal for providing knowledge and functionalities tailored to integrators. SAST’s open IoT platform The open IoT platform is based on an open standardised operating system for video security cameras The open IoT platform is based on an open standardised operating system for video security cameras that creates a common basis for innovation and growth for the security industry. Apps built on SAST will enable airports, restaurants, stadiums and other facilities to transform security cameras into smart devices. The first partners are already developing apps based on the SAST ecosystem. “We will bring all the partners of our platform together and will showcase the first applications already realised on the platform,” says Nikolas Mangold-Takao, SAST Vice President of Marketing and Product Management. “In order to showcase this effectively at ISC West, we will create a space to demonstrate solutions effectively. At the same time, we are using the booth as our meeting space and will create a collaborative environment for our partners and all participants.” IoT and access control “We want to ensure that all visitors of our booth (No. 10073) are getting to see first-hand solutions which are already realised based on first apps and cameras using our Operating System,” he adds. “We also want to demonstrate the benefits of the SAST platform for solution developers, integrators and manufacturers.” SAST is about bringing different players from the industry together in order to deliver better solutions" SAST will be looking for measurable results at ISC West. “On the one hand, we measure results by hard facts, such as the number of new partners who will join us and how satisfied our current ones are with the output,” says Mangold-Takao. “On the other hand, direct feedback from visitors at the booth, especially professionals from our industry and end-customers, is also extremely important to us, and we will measure it. SAST is about bringing different players from the industry together in order to deliver better solutions.” Openpath Access solution Another new exhibitor with a relatively large booth is Openpath, whose booth (No. 23051) will be 1,200 square feet. Openpath Access combines cloud-based software and sleek hardware with an app to enable hands-free access to an office using a smartphone that doesn’t need to leave your pocket. Although large for first-time exhibitors, the Openpath and SAST booths fall squarely in the “medium range” of overall exhibit sizes at ISC West – larger than the smallest 100-square-feet exhibits typical for many first-time exhibitors, but still smaller than the largest booths such as Hanwha Techwin America (5,500 square feet). In addition to the new exhibitors on the main show floor, the Emerging Technology Zone, located in the Venetian Ballroom, will welcome new startups in the security marketplace.
At ISC West 2019, in booth #14079, Hanwha Techwin America, global supplier of IP and analog video surveillance solutions, is slated to announce its latest multi-sensor camera, the Wisenet PNM-9000VD (2-head) delivering 5MP image quality and modular lens configuration at an affordable price. Wisenet 5MP IP camera The PNM-9000VD supports 30fps image capture and true 120 dB WDR (Wide Dynamic Range) without compromising frame rate for each of its 5MP sensors The PNM-9000VD supports 30fps image capture and true 120 dB WDR (Wide Dynamic Range) without compromising frame rate for each of its 5MP sensors. For maximum adaptability, configurable factory focused lens/CMOS sensor modules are available in 3.7, 4.6, and 7mm for multiple fields of view which can be easily installed on site. Hallway view aspect ratios are also supported for monitoring of vertical shaped areas. Each sensor has its own Wisenet 5 chip providing a full suite of built-in video analytics including loitering, directional detection, fog detection, tampering, motion detection, and objects entering or exiting an area. H.265 video compression The PNM-9000VD supports a selectable triple codec featuring H.265/H.264/MJPEG, which is complemented by Hanwha Techwin’s in-house developed WiseStream II technology. Additionally, for customers still utilising the H.264 video compression-based VMS and servers today, having H.265-capable cameras provide a future-proof investment as the infrastructure continues to evolve. “Hanwha Techwin is one of the first manufacturers of multi-sensor cameras in the video security market that support a triple codec, including H.265, H.264 and MJPEG” said Ray Cooke, Vice President of Solution & Product Management, Hanwha Techwin America. “We’re happy to see the increased momentum for H.265 as more organisations realise that high-resolution video doesn’t necessarily have to take up more space.” The PNM-9000VD utilises a single IP address requiring only one VMS license further reducing the cost to install, service, and support.
Five things to consider for AI with video technologyDownload
OSDP is the strongest access control for your businessDownload
Preparing your organisation with quality situational awarenessDownload
- Alpro secures Fred Perry headquarters with transom door closers, pole and door handles
- ASSA ABLOY’s door opening solutions safeguard RAF Benson children's nursery
- Euro Rastpark collaborates with Dallmeier to provide economical and top-quality video observation solution
- Software House C•CURE 9000 helps Florida Atlantic University secure College of Medicine