BQT Solutions Access Control Cards, Tags & Fobs

If you’re a security or facilities manager, you may already be aware of the quiet revolution that’s taking place across businesses and organisations up and down the country. By the end of 2020, 20% of all ID and access control systems featured mobile capability, and this is set to increase by a further 34% over the next three years. There’s no doubt that using a smartphone or mobile device in place of traditional credential and access control is a growing trend that’s only been sped up by the pandemic. It’s true that many businesses are still very much focused on remote working, although many are now starting to implement new-and-improved strategies that are better suited to protect the workforce moving forward. Mobile ID systems As the next normal becomes clearer, businesses will be reviewing procedures such as access control, occupancy monitoring, reducing touch points and tracking visitors. Mobile ID systems are ideally suited to this task. But what are the key reasons for considering such a setup in 2021? But why is this new technology so well-suited to future-proof your physical access system, and why is it becoming so popular? Eradicating outdated legacy credentials Have you seen just how vulnerable outdated Proximity card technology can be? Low-frequency 125kHz cards can be cloned in a matter of seconds with the use of cheap, readily available tools. Despite their weaknesses, they are still used by a huge majority of businesses – big and small. All smartphones include two industry-standard features that make them perfect for operating a secure, contactless credential Replacing such a system with a mobile-enabled system is one of the best ways to increase security ten-fold. Thanks to a cloud-based infrastructure, mobile ID offers best-in-class security and cryptography. All smartphones include two industry-standard features that make them perfect for operating a secure, contactless credential. Bluetooth Smart and NFC (Near Field Communication) make them the best product to operate such a credential via a secure app. If you’re looking for best-in-class security in 2021, mobile access is most definitely the way forward. Removing touch points across the business Reducing touch points and the adoption of touchless facilities has become a key priority for businesses in the wake of COVID-19. Even as businesses start to return to the office and operate a home/office split, it will be imperative that unnecessary contact is kept to an absolute minimum between staff. The traditional issuance of identification and access control credentials can pose problems in this regard. Facility and security managers who are responsible for onboarding and processing ID have done the process face to face. Mobile access makes it possible to carry this process out without people coming into direct content. First, the security manager has access to a secure portal, allowing them to create, manage and edit credentials anywhere. They can upload and remotely transfer mobile ID and access control credentials directly to users’ smartphones over the air. Via the secure app, users can view and see their credentials and immediately begin using it for ID and access control by simply placing their smartphone over card readers. Enabling a more flexible way of working The way in which we work has changed for good. Even as people more people return to the office in 2021, a majority of businesses will be operating a home/office split indefinitely. This once again reinforces the need for a smarter, more adaptable onboarding system. Implementing mobile ID is the perfect way of doing this: over-the-air delivery of credentials and security data is now a given, helping businesses create the perfect balance between the home and the office. No longer do people have to come into the office for the onboarding process. Increasing convenience and user experience More often businesses are realising the value mobile ID can have for enhancing the work experience as well as security Ok, so mobile ID is the perfect way of increasing security and adapting workplaces to a post-COVID way of working. And we’ve not even touched on the most obvious advantage yet: Convenience. How many times have you forgotten your ID card? We’re sure it’s more times than you forget your smartphone. These powerful processors have become intertwined with the way we carry out tasks on a daily basis. They’re so vital that people will soon notice if they’ve forgotten it. From an employee’s perspective, mobile ID and access control is simple, convenient and extremely user-friendly. More and more businesses are realising the value mobile ID can have for enhancing the work experience as well as security. From the employer’s perspective, mobile ID means it’s easier for administrators to manage access and credentials. Future-proofing access control now will ensure that in the longer term, mobile ID is well worth the investment. The annual expenditure of printing ID cards and purchasing credentials can be vast, while reissuance costs can also quickly add up for larger organisations. These issues are a thing of the past for businesses using mobile ID. Mobile ID perfect tool for 2021 and beyond Until mobile ID, new and improved credentials’ main focus was on increasing security. Mobile ID not only delivers that, but it also provides a more convenient way of accessing the office in a way that’s perfectly suited to returning to the office in 2021. If there was ever a time to upgrade, now is the time. Summing up, mobile access is changing the way we access the office by: Eliminating weak links in security systems such as outdated legacy card technologies Eradicating the need for touch points across multiple areas of the workplace Enabling a smarter, more flexible approach to onboarding Increasing convenience – for both employers and employees.

Access control and door entry is a huge responsibility, and challenge, for local authorities and housing associations UK wide. For councils, they’re accountable for the security and safety of many public facilities such as leisure centres, libraries as well as residential housing developments which are often large scale and home to hundreds of people. Housing associations manage affordable rental housing which also means they’re responsible for the appropriate access control management for each individual house or flat. Technology developments have enabled better entry systems that are far more secure yet also more convenient and easier to manage. For example, with modern intercom and access control systems, remote management and communication is something that offers local authorities and housing associations features that enable them to reduce costs and cut their carbon footprints by managing multiple sites from one place. On the other hand, such technological innovation has meant that local authority and housing association specifiers and consultants now have a wide range of systems and products to choose from which can cause issues in ensuring the right system for a specific building or development is chosen. Choosing an appropritate access control system In choosing an appropriate system, local authorities and housing associations need to opt for a cost effective solution that can be easily maintained with excellent support from the manufacturer and guarantees that the system and system parts will remain supported for the duration of its expected life cycle. It is also important that the chosen system is flexible to cater for the varying needs of the tenants and visitors. Of increasing importance is the reduction of anti-social behaviour which new technology can help by providing the use of data loggers which track the use and events of a door entry system, allowing specific evidence to be located by integrating with CCTV. Using technology to our advantage Through advancements in management systems and services, we can gain a much better visual representation of the events and general usage of an intercom entry system and not just its proximity access control. Systems, for example, can now send email alarms or notifications to the administrator or management. We are now able to modify user rights and access levels on the go from a mobile app which enables a much greater control over service and maintenance engineers, such as making sure they have full access when required via an app, rather than arriving to site with the incorrect keys or access fob. Systems, for example, can now send email alarms or notifications to the administrator or management Dealing with tenant’s lost and stolen keys has never been so easy either. The blocking or deletion of lost fobs and adding a new fob can be carried out in minutes while at the same time removing the cost of sending an engineer to the development to programme new fobs. This greatly reduces the carbon footprint of the whole task as fobs can now be sent out via post to a secure location for collection. Technology has also helped local authorities and housing associations to overcome the issue of not being able to have a concierge or building manager available 24/7 at some developments. Now with internet communication, it’s possible for tenants and visitors to get in touch with someone should they need assistance, whether that’s from within the apartment or from an entrance point. For example, lets take the Videx VX2200 with IP concierge integration. This system is exceptionally flexible, enabling calls to be answered on Videx intercoms and also mobile phones if required. With the integration of the IP concierge each block can be either standalone or networked via the internet back to a central control room. Reduced maintenance costs and carbon footprint We work with a wide range of local authorities and housing associations to help them overcome access control and door entry challenges. One organisation we have recently partnered with is The Living Group to help them greatly reduce their maintenance costs and carbon footprint by installing the MiAccess offline proximity system on many of their developments across the North East. Technology developments have enabled better entry systems that are far more secure yet also more convenient and easier to manage By installing an appropriate system, The Living Group has managed to overcome issues caused by the existing system’s limitations and also enabled much more flexibility when it comes to effectively managing the access control system of all their included developments. For those responsible for effective and appropriate access control, the management of the systems are easier, quicker and there’s no delay or on-going costs for needing a specialist programme to modify fobs and access rights as this can now all carried out in-house. Improved security legislation Further advancements in programmes such as Secured by Design (SBD), a police initiative that improves the security of buildings and their immediate surroundings to provide safe places to live, work and visit, means that there’s more security legislation being implemented that’s making intercoms and access control more secure, without affecting ease and convenience. Videx holds an SBD accreditation and we know, from first-hand experience, how it’s making a difference in keeping tenants safe. When you combine the safety features promoted by an SBD member company like ourselves with the likes of the Videx event logging, image capture and ability to modify access users on the go, for example, we can help to create a very safe and secure environment. Personally, I think there needs to be a greater emphasis on the role of security legislation Technology has completely transformed the way local authorities and housing association are able to choose, install and manage door entry and access control systems for tenants and visitors alike. Personally, I think there needs to be a greater emphasis on the role of security legislation such as Secured by Design to ensure all councils and housing association consultants are up to date with what constitutes a robust and secure system that’s also cost effective too. In my role, I see weaknesses in systems and constant ongoing costs that could easily be avoided. For instance, features such as timed remote entry means local authority and housing association management no longer need to worry about keys being lost, the wrong keys being supplied or locks needing to be changed. With new systems such as the Videx MiAccess and Videx WS4 range, we can help to massively reduce a housing association’s or council’s carbon footprint and engineer costs by allowing them the access to management and control from an offsite location. Crime prevention We can also use live and logged events to help prevent crime in different ways, from antisocial behaviour growing around a tenant being called or visited much more regularly than others, to knowing a tenant is currently still living at a property but isn’t paying rent or answering to any correspondence. Technology enables local authorities and housing associations to receive detailed data and therefore behavioural insights on the people under their management and care. If consultants and specifiers are advised on the most appropriate systems that meet their specific entry needs, they can ensure greater, safer and more convenient access control that meets the requirements of both the end user and the those responsible for its effective management.

The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for post and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing whilst obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc whilst sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for manoeuvre. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.

Ava Group (AVA), a provider of security risk management services and technology will be showcasing its portfolio of security solutions at ISC West - Las Vegas, booth 25103. ISC West is the largest converged security industry trade show in the US with the exhibition taking place from April 10-12th. The event provides a major platform for professional networking, sourcing new suppliers and introducing new products and technologies, encompassing everything from access control to unmanned vehicles. ISC West also includes the SIA Education@ISC conference programme, running from April 9-11th. Risk management services Ava Group’s technology division incorporates two well established security risk management companies - Future Fibre Technologies (FFT) and BQT Solutions, both of which will be on the booth this April. As a provider of risk management services and technologies, Ava Group offers a portfolio of complementary solutions encompassing both fiber optic intrusion detection as well as high security access control and locking. Ava Group is proud to present the latest solutions from its technology division, namely the Orca lock and latest enhancements to the Aura Ai-2 controller Ava Group is proud to present the latest solutions from its technology division, namely the Orca lock and latest enhancements to the Aura Ai-2 controller. The enhanced Aura Ai-2 from Future Fibre Technologies features unrivalled high-sensitivity detection, location accuracy, cut resilience capability and the industry’s longest linear range. Outdoor locking solution This product features new ultra-low noise optical detection electronics. This ensures a single controller can cover a distance up to 110 kilometers, accurately detecting, locating and reporting multiple disturbances to just +/- two meters. BQT Solutions will be demonstrating the new high-strength Orca lock (YG80) – providing ultimate security for all environments. Building on the success of the award winning YG10, the Orca lock is designed for securing gates, roller doors, shipping containers and any other large door or entryway. Alongside the Orca’s impressive physical attributes, a unique feature is its ability to fully integrate into an access control system, surpassing any other solutions available in the market. Orca is fully monitored, weatherproof, and user configurable - providing the perfect indoor and outdoor locking solution. Real-world projects The Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats As well as getting to know the product range, the Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats. Newly appointed Chief Operating Officer, Scott Basham commented, “We’ve seen continued growth in demand for our products in the US market and returning to ISC West provides us with a perfect platform to showcase our broad range of capabilities and explain to visitors how our product range can be applied to meet their particular needs. We always welcome the opportunity to be face-to-face with our customers worldwide and thoroughly enjoy being able to engage directly with the market in this way.” Fiber sensing technology Alongside their presence in the exhibition hall, Ava Group’s CTO – Technology, Dr Jim Katsifolis will be presenting ‘Fiber Optic Perimeter Intrusion Detection Systems (PIDS): Trends, Myths and Realities Revealed’ 10:15 am on April 9th, Sands 302. This presentation promises to cover how best to select appropriate fiber sensing technology products when specifying, as well as how to assess the true performance of such PIDS systems. With over 1,000 exhibitors and brands and an anticipated 30,000 security professionals, ISC West is a must-visit for anyone in the security risk industry.

Ava Group (AVA), a provider of security risk management services and technology will be showcasing its portfolio of security solutions at Intersec Dubai 2019, stand S3-C48. Intersec Dubai features a rich selection of exhibitors in Security, Safety & Fire Protection, attracting visitors from the Middle East, Africa, the Indian subcontinent and well beyond. Ava Group will be presenting the latest exciting solutions from its technology division - which incorporates Future Fibre Technologies (FFT) and BQT Solutions. As a provider of risk management services and technologies, Ava Group offers a portfolio of complementary solutions encompassing both fibre optic intrusion detection and high security access control and locking. Increased investment As a key event for the region and beyond, Intersec Dubai is the perfect way for security providers and buyers to start 2019" Mark Horton, Global Sales & Marketing Director commented, “As a key event for the region and beyond, Intersec Dubai is the perfect way for security providers and buyers to start 2019. Our solutions offer the very latest in security technology and the highest levels of protection, key benefits that we know are always well-received by visitors at the event.” Mark continued, “Over the last couple of years we have seen a significant growth in demand for our products in the Middle East, with increased investment in infrastructure across the region as a whole. Because of continued growth in the market, we have also invested in the expansion of our Dubai-based office and regional support team to ensure we are perfectly placed to supply and service our customers.” Reporting multiple disturbances Future Fibre Technologies will be showcasing its enhanced Aura Ai-2 controller. Featuring unrivalled high-sensitivity detection, location accuracy, cut resilience capability and the industry’s longest linear range - this product features new ultra-low noise optical detection electronics. This ensures a single controller can cover a distance up to 110 kilometres, accurately detecting, locating and reporting multiple disturbances to just +/- two metres. Also on stand S3-C48, BQT Solutions will be demonstrating the new high-strength Orca lock to the middle east market Also on stand S3-C48, BQT Solutions will be demonstrating the new high-strength Orca lock to the middle east market. Building on the success of the award winning YG10, the Orca lock is designed for securing gates, roller doors, shipping containers and any other large door or entryway. Alongside the Orca’s impressive physical attributes, a unique feature is its ability to fully integrate into an access control system, surpassing any other solutions available in the market. Security risk management Orca is fully monitored, weatherproof, and user configurable - providing the perfect indoor and outdoor locking solution. As well as the products themselves, the Ava Group team will be on hand to explain how its solutions are being used in real-world projects to address the latest threats. Mark concluded, “We are looking forward to discussing recent key examples of our technology in action, including a major military closed data network where our data network infrastructure protection solution is protecting against tapping and tampering. These projects illustrate the depth of our expertise in security risk management and highlight the level of protection which we achieve to client’s assets and infrastructure. If you are visiting the event come and have a chat with our friendly and expert team on Stand S3-C48 about your specific security needs.”

BQT Solutions, a provider of high security card and biometric readers and locks, has launched its new Orca weatherproof lock which provides industry-leading strength, unparalleled environmental durability and seamless access control integration for securing gates, roller doors, shipping containers, and any other large door or entryway. Matthew Nye-Hingston, CTO of BQT Solutions Locking division commented, “Orca is the ultimate weatherproof lock, providing the complete combination of strength, security and convenience in one solution. It encompasses the features found in premium electronic locks, with the physical strength and function required to secure doors of any shape, whatever size.” Integration into access control system Key features such as an IP67 rated design and built-in heater enable the Orca to withstand extreme weather environments including hot and cold climatesOrca lock is the latest generation of roller lock from BQT Solutions, building on an impressive portfolio that includes the YG10 – winner of the SIA New Product Showcase Award in the Lock Systems and Secure Storage Containers category presented at ISC West 2018. Along with its highly impressive physical attributes, Orca’s ability to integrate into an access control system is what elevates its abilities well beyond anything else on the market. Orca is fully monitored and user-configurable, whilst being impervious to weather or environmental challenges making it perfect for deployment indoors or outdoors. Orca’s standout features include: High Security Performance - With a holding force in excess of 50,000N, 18mm diameter stainless steel bolt pin and reinforced strike design, the Orca lock ensures the most sensitive sites remain protected from even the most vigorous methods of attack. Fully Weatherproof - Key features such as an IP67 rated design and built-in heater enable the Orca to withstand extreme weather environments including hot and cold climates, marine and desert conditions. Highly Configurable - Orca can be adapted to suit a wide range of application requirements, with user selectable fail safe/fail secure modes and three user selectable control methods. Complete Monitoring - Orca can truly become a part of the access control system, with a range of output signals including: bolt locked and unlocked position, door position, and tamper detection. Versatile Installation - A symmetrical design means Orca can be installed both horizontally and vertically, giving greater flexibility to installers looking for optimum positioning. Low Cost Running - With the heater disabled, Orca offers low current consumption, drawing as little as 30mA in standby and only 300mA in operation at 12VDC. Long-term Reliability - A high quality low voltage motor is the key to the Orca’s reliability while stainless steel and wear resistant plastic components ensure complete peace of mind for any security operator. Optimal heavy-duty monitored lock BQT Solutions is a specialist in the development, manufacture and supply of high quality, high security card and biometric readersMatthew added, “Orca is the perfect heavy-duty monitored lock for any integrated security solution. Our highly-skilled team in New Zealand has worked hard to ensure we bring a product to the market that we truly believe is the best of its kind. With several exhibitions lined up in the new year, we are looking forward to showing more customers how Orca can secure their installations.” An Ava Group company, BQT Solutions is a specialist in the development, manufacture and supply of high quality, high security card and biometric readers, electromechanical locks and related electronic security products. The company provides a wide range of both off-the-shelf solutions and purpose tailored solutions. Working with major system integrators, security consultants and end users, BQT Solutions develops tailored access control solutions to fulfil a range of access control requirements. From standalone units to fully integrated enterprise solutions, BQT access control systems are designed to provide maximum security, maximum value – and a migration path to meet present and future needs.