BPT Access Control Cards, Tags & Fobs

The experience of the COVID-19 pandemic has made us all more conscious of who is coming and going from our property. Whether it is a family home, business premises or public building, property owners want full control over access for protection and peace of mind. As a provider of access control technologies, we are seeing a growing demand for automated gates with a variety of access control systems. There are a number of considerations that buyers need to make when investing. And as an installer, there is advice that you can offer to help your clients make the right choice for their property. Here are some of the key considerations you’ll need to make and discuss with your client. Whomever you buy from, you should be offered more than a simple instruction manual. Electronic locks, magnetic locks and code security In the first instance, you’ll need to advise on the type of lock and access control available. Electronic locks release on the operation of the automation system to allow the gates to open. Locks are required for all non-locking (also known as reversible) operators and are recommended for any gate on a multi-user site or any gate over 2.5m. Apply the same logic to an automated gate as you would to a domestic door – for example, you wouldn’t fit your front door with a lock on the same side as the hinges or a drop bolt at the hinge end of a manual gate so why dispense with this logic when the gate is automated? Electronic locks release on the operation of the automation system to allow the gates to open There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks. These are all designed for external use. While the gate itself will provide physical security, the customer will want to feel in control of who enters their property, when and for what purpose. Consider access for post and deliveries, waste disposal and visitors arriving on foot etc. There is a range of options available. Intercom systems will allow the user to vet visitors, keypad entry can allow remote access for visitors with a specific code, remote controls allow an oncoming driver to open the gates without getting out of the vehicle, and a timer control can be used to open or close the gates at certain times of the day. Vehicle detection loops can be installed discreetly under the tarmac allowing the presence of vehicles to exit the gates and prevent closing whilst obstructed. Sliding gates versus swinging gates There are a number of locks on the market including magnetic locks, drop locks that “shoot” a bolt into the ground and side latching locks Gates can be automated to either swing or to slide open and in the case of swinging gates, the opener may be concealed underground or gate mounted. The most suitable opener for your installation will depend on the space available and the type of gate selected. Concealed underground automation is ideal for highly ornate gates. However, where gates are fully infilled (typical of many timber designs), gate mounted openers are concealed from the front of the gate by the gate leaf and present a cost-effective option. The choice between slide and swing is largely down to space - swing gates require a clear space for their opening arc whilst sliding gates require space to one or both sides of the gate. Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited, as they use the least space when opening. Voltage Most swing gate and sliding systems are available in 24v or 230v. The 24v systems still need 230v mains power – there is a transformer built into the 24v control panels. Deciding which voltage to use can include a combination of factors such as the material of the gates, the location of the system and the safety features you want. Concealed underground automation is ideal for highly ornate gates With wrought iron gates, the wind can pass through them whereas with fully boarded wooden gates (popular because they give full privacy) the wind has nowhere to go, so they act like sails. For commercial or industrial applications with larger entrances and a heavy gate, you may need 3 Phase 400v power (sliding gates only). Installing gate motors in confined spaces The environment in which you are fitting may well influence which gate and motor you recommend. Will it be in an exposed area which is subject to the elements? Will it be positioned on a slope? Sliding gates are perhaps the best choice where the drive slopes or when drive space is limited Installers have always faced the challenge of installing gate motors in confined spaces. When fitting a pedestrian gate, there is often limited space in which to work – potentially making an installation time consuming and technically demanding. If this is the case for you, consider a gate operator which is designed specifically for installations with limited space for manoeuvre. An example of this is the E5 compact gate operator. The operator is not only small but has an optional slide lever attachment designed for installations where there is extremely limited space, meaning that just 8cm of the pillar is needed for installation. What’s more, improved fixing points and a simple ‘hook and fasten’ process means assembly is safe, quick and straight forward. Ultimately, you’ll be looking for a good quality, reliable product with good service. Work with a supplier that offers more than just a manual. If they are happy to offer training, their time and advice when you buy, the chances are you’ll get their support long term.

The unprecedented global impact of COVID-19 has taken its toll on all of us, but as cases of the virus thankfully recede, employers are now forced to confront how they can enable a safe return to work for employees. For many employers, this means they will have to carry out a COVID-19 risk assessment, redesign workspaces to maintain social distances, carry out more frequent cleaning, manage the transmission risk and find alternatives to touch-based security devices. Protecting workplace occupants in any emergency requires preparation and clear communication. This is especially critical in a health crisis involving an infectious disease. These are some of the essential best practices that could help organisations reduce the impact on their employees and operations during this pandemic. 1. Use a visitor management system With a visitor management system, organisations have a single source of real-time and historical insights into who is, or was recently, in the workplace. This is especially important because of the need to perform contact tracing should anyone in the organisation show symptoms of COVID-19, meaning everyone they have been in contact with needs to be contacted and asked to isolate. Yet still, first impressions are made at the front desk or lobby, where the visitor experience needs to be a positive one. At the same time, though, any emergency event requires that there be strict control over who is entering the workplace. This policy also needs to be clearly communicated to visitors. Doing this minimises risk to visitors as well as the workforce. In addition to delivering a high-quality visitor experience, the ideal visitor management system must: Enable organisations to meet regulatory compliance mandates and facilitate check-in at a self-service kiosk to minimise wait times. Customise the visitor experience to support specific security needs, such as accelerating and simplifying check-in or requiring additional security pre-checks. Automate compliance as it relates to visitor access rules with historical visit reports. 2. Pre-check questions at visitor registration kiosks Organisations can strengthen security at the registration kiosk using a flexible, enterprise-grade visitor management system to add visitor sign-in steps. This has proven successful in the past when used to control the spread of infectious disease during an outbreak. An example of this is a U.S. children's hospital which managed to reduce facility infection rates by 25 percent over a two-year period using a commercial, off-the-shelf physical identity and access management (PIAM) solution from HID Global. The solution provides two particularly important capabilities that can be used by organisations to protect their workplace from the uncontrolled spread of an infectious disease: Enhance visitor registration policy with additional mandatory questions to help identify any visitors who may need other screenings. Extend the visitor registration kiosk with a mandatory pop-up asking further questions during visitor check-in. 3. Understand who has visited your workplace Successful controlling the spread of infection throughout a facility requires the ability to automatically maintain an auditable trail of activity. This can be done using an enterprise-grade visitor management system that makes it easy to retrieve historical visit reports. This provides a timeline of who was in the workplace, and when they were there. Key features include: A single dashboard providing useful visitor insights at your fingertips. Historical reports that provide visitor details including location and contact information, all in compliance with General Data Protection Regulation (GDPR) and other privacy regulations. 4. Clearly communicate how infection risks can be reduced Global organisations must actively communicate with visitors and employees on the outbreak of infectious diseases and follow best practices outlined by the World Health Organization (WHO). Here are several things organisations can do in this area to help maintain a safe and healthy workplace: Re-enforce and communicate WHO best practices with guideline posters in the front lobby and throughout the workplace. Add posters that also encourage regular and thorough washing of hands. Encourage everyone to cough or sneese into their shirt sleeve in their flexed elbow or cover their mouth and nose with a tissue. Encourage everyone to keep a relatively safe distance from each other and use alternatives to handshakes when saying hello. Organisations must contend with a variety of workplace challenges during the outbreak of an infectious disease. These challenges can be solved with best practices that include a comprehensive visitor management system that automates critical check-in policies and maintains an auditable trail of visitor activity.  

The emergence of smartphones using iOS and Android is rapidly changing the landscape of the IT industry around the world. Several industries, such as digital cameras, car navigation, MP3, and PNP, have been replaced by equivalent or even better performance using smartphones. Smartphones provide increasing portability by integrating the functions of various devices into a single unit which allows them to connect to platforms with network-based services and offer new services and conveniences that have never been experienced before. These changes have expanded into the access control market. Although not yet widespread, ‘Mobile access cards’ is one of the terminologies that everyone has been talking about. RF cards used for access security are being integrated into smartphones just as digital cameras and MP3s were in the past. While people might forget their access cards at home in the morning, they seldom forget their smartphones. Using smartphones for access control increases entry access reliability and convenience. Mobile/smartphone access control A key aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction As in other markets, the combination of smartphones and access cards is creating a new value that goes beyond the simple convenience of integration enhancing the ability to prevent unauthorized authentication and entrance. People sometimes lend their access cards to others, but it is far less likely they might lend their smartphone with all their financial information and personal information – to another person. This overcomes an important fundamental weakness of RF cards. Another valuable aspect of mobile credential is that it makes it possible to issue or reclaim cards without face-to-face interaction. Under existing access security systems, cards must be issued in person. Since card issuance implies access rights, the recipient’s identification must be confirmed first before enabling the card and once the card has been issued, it cannot be retracted without another separate face-to-face interaction. Mobile access cards In contrast, mobile access cards are designed to transfer authority safely to the user's smartphone based on TLS. In this way, credentials can be safely managed with authenticated users without face-to-face interaction. Mobile cards can be used not only at the sites with a large number of visitors or when managing access for an unspecified number of visitors, but also at the places like shared offices, kitchens and gyms, currently used as smart access control systems in shared economy markets. The market share of mobile access cards today is low even though the capability can offer real benefits to users and markets. While the access control market itself is slow-moving, there are also practical problems that limit the adoption of new technologies like mobile access cards. Use of Bluetooth Low Energy technology While NFC could be an important technology for mobile credential that is available today on virtually all smartphones, differences in implementation and data handling processes from various vendors prevents universal deployment of a single solution to all devices currently on the market. Accordingly, Bluetooth Low Energy (BLE) has been considered as an alternative to NFC. Bluetooth is a technology that has been applied to smartphones for a long time, and its usage and interface are unified, so there are no compatibility problems. However, speed becomes the main problem. The authentication speed of BLE mobile access card products provided by major companies is slower than that of existing cards. Enhancing credential authentication speed Authentication speed is being continuously improved using BLE's GAP layer and GATT layers The second problem is that mobile access cards must be accompanied by a supply of compatible card readers. In order to use mobile access cards, readers need to be updated but this is not a simple task in the access control market. For 13.56 MHz smart cards (which were designed to replace 125 kHz cards), it has taken 20 years since the standard was established but only about half of all 25 kHz cards have been replaced so far. Legacy compatibility and the need for equivalent performance, even with additional benefits, will drive adoption timing for the Access Control market. While BLE technology helps resolve the compatibility problem of mobile access cards, it can identify some breakthroughs that can solve the speed problem. Authentication speed is being continuously improved using BLE's GAP layer and GATT layers, and new products with these improvements are now released in the market. Making use of key improvements allows Suprema's mobile access card to exhibit an authentication speed of less than 0.5 seconds providing equivalent performance to that of card-based authentication. AirFob Patch MOCA System's AirFob Patch addresses the need for technological improvements in the access control market in a direct, cost effective, and reliable way – by offering the ability to add high-performance BLE to existing card readers – enabling them to read BLE smartphone data by applying a small adhesive patch approximately the size of a coin. This innovative breakthrough applies energy harvesting technology, generating energy from the RF field emitted by the existing RF reader – then converting the data received via BLE back into RF – and delivering it to the reader. By adding the ability to use BLE on virtually any existing RF card reading device, MOCA allows greater ability for partners and end users to deploy a technologically-stable, high performance access control mobile credential solution to their employees, using devices they already own and are familiar with. Adding MOCA AirFob Patch eliminates the need to buy and install updated readers simply to take advantage of mobile credential, lowering costs and risks, and increasing employee confidence and convenience. Growth forecast of mobile access card market in 2020 In 2020, forecasts show that the mobile access card market will grow far more rapidly Several companies have entered the mobile access card market, but they have not set up a meaningful product solution stream until 2019. In 2020, forecasts show that the mobile access card market will grow far more rapidly. Reviewing new entries into the market allows identification of the latest products that provide improving solutions to compatibility and speed problems. MOCA AirFob Patch addresses development plans in process today that overcome the legacy installed base of card readers – allowing rapid creation of an environment that can make immediate use of BLE mobile access cards. Integrated mobile digital ID With proven usability and within suitable environments, mobile access cards will also begin to make inroads into other markets, not just the access control market. In the sharing economy market, which seeks access management without face-to-face interaction, the integrated mobile digital ID led by the 'DID Alliance' will serve as a technical tool that can be used in access authentication – forging increasing links between the access control and digital ID markets.

Interphone, the security systems and building technology integrator, completes an advanced project for Ardmore Construction at the high-profile Sutton Point development, a vibrant new community at the heart of the London Borough of Sutton. The company was appointed to design and install the integrated security systems, which includes fibre infrastructure, BPT door entry, PAC access control, IP-networked CCTV and an IRS communal aerial system with SKY Q. The installation has been recognised by the UK Outstanding Security Performance Awards (OSPAs) with Interphone nominated as a 2019 finalist in the Outstanding Security Installer category. Fibre backbone network The Interphone project team took the decision to move to fibre infrastructure to improve performance “Through the effort and commitment of our team the project was successfully completed on-time, within budget, and to the highest possible standards notwithstanding design changes in the building along the way, which required modification to our own design and approach to aspects of the installation,” explained Albert Dwek, Sales Manager at Interphone Limited. In particular, the Interphone project team took the decision to move to fibre infrastructure to improve performance and ensure it could deliver a high-specification security system. As a result, the company created a fibre backbone network, which allows CCTV images to be viewed in true 1080p/4k without compromising any other components of the system. Responsive working relationships Interphone worked closely with services engineers QuinnRoss Consultants Limited throughout the project. Michael Keenleyside, Electrical Engineer at Quinn Ross commented: “We pride ourselves on our ability to deliver the best possible service and solution for each of our clients, so it is essential to have highly responsive working relationships in place with key technology partners.” “Interphone was flexible and adaptive throughout the design and installation phases of the development, which ensure that any changes to system requirements were handled quickly and efficiently. Their team’s knowledge, understanding and commitment was essential to the success of the project.” The sophisticated CCTV solution incorporates a site-wide, IP-networked camera system and full-perimeter PTZ (Pan Tilt and zoom) camera system from HIKvision. Greater compression The full-perimeter system runs in real-time over three towers, three remote stations and two virtual concierge points with interlock ability The full-perimeter system runs in real-time over three towers, three remote stations and two virtual concierge points with interlock ability. The external PTZ camera images, recorded onsite, are also shared with the local police. This means the management company can keep the site secure for its residents, while allowing the police to protect the area in and around the development against crime. The PAC access control system enables all management tasks related to the tenants and staff to be administered from the central computer as and when required, ensuring the highest level of security around the site and added peace of mind. Meanwhile, BPT’s XIP door entry system offers significantly greater compression, providing the clearest and highest quality AV currently available, even with the significant background noise. Building communications The added PCS concierge facility also has improved switchboard software performance, delivering full control of building communications at two desks, so the system will never be engaged and never miss a visitor call. The primary focus when designing this project was the delivery of a system that could expand to meet changing requirements" “The primary focus when designing this project was the delivery of a system that could expand to meet changing requirements. As a result, we have implemented a system that not only uses the most up-to-date technology, but by its design, has been future proofed with the ability to grow. Therefore, the developer can meet all its internal requirements and ensure high levels of security for residents, visitors and members of the public,” commented Dwek. Technical capabilities David Dobouny, Operations Director at Interphone Limited added: “We are committed to the highest levels of service delivery. This project was selected to demonstrate our technical capabilities covering access control and CCTV systems for our NSI accreditation. We achieved a grade A rating, with zero faults and no negative comments regarding on-and off-site documentation, design and installation. This is a fantastic achievement for everyone involved, especially considering the size of the project.” Sutton Point is a large-scale mixed-use scheme located close to the town centre. The high-profile development included the full demolition of an existing tower, and the design and construction of 332 one-and two-bedroom apartments, prime three-bedroom penthouses, 21,000 square feet of retail space, 18,000 square feet of office space and an 80-bedroom hotel.

The enhanced Physical Perimeter Security Zone at IFSEC International 2016 will occupy over 1,000 square metres of dedicated floor space IFSEC International, Europe’s largest security exhibition, will enhance its dedicated Physical Perimeter Security Zone in 2016 with many leading suppliers within the sector already confirmed to participate. Taking place from 21-23 June 2016 at London’s ExCeL, IFSEC International continues to announce further exciting details and new additions to the 2016 flagship event. Physical security suppliers exhibit latest products With more than 27,000 visitors annually attending IFSEC International and in 2015 5,200 of those directly expressed an interest in physical perimeter security, for 2016 organisers have confirmed that the Physical Perimeter Security Zone will host global leaders supplying a range of products. The UK’s premier supplier of automatic gates, parking barriers, retractable turnstiles and tubular motors, CAME UK along with sister company BPT, the UK’s number one provider of bespoke and vandal resistant audio video door entry systems, have been confirmed as a flagship exhibitor within the Physical Perimeter Security Zone. Taking a 60 square metre stand and exhibiting as CAME BPT they will showcase their latest products to launch within this sector in 2016. James Bostock, Managing Director for CAME BPT UK, said: “Commitment to excellent customer relationships and dedication to product quality are the cornerstones of our success. Our participation in this year’s IFSEC International provides an ideal opportunity to demonstrate both to a wider audience. As the UK’s leading multi-discipline manufacturer in the automation and access control sector, we look forward to showcasing why our products and people continue to set the standard, and why more and more security industry professionals are choosing to work with us.” Growth of perimeter security market Peter Poole, Sales Director for IFSEC International says: “We are delighted to see CAME BPT back at IFSEC International and taking a flagship position within the Physical Perimeter Security Zone. We are continually adding to this zone and plan to announce more major new additions in the coming weeks.  Having listened to feedback from the industry we wanted to ensure that our physical perimeter security offering met the needs of this vital market segment that showcases the very latest products, services and innovations.” According to a recent study by Marketsandmarkets the perimeter security market is expected to reach 13.18Bn by 2020. The rising numbers of perimeter intrusion incidents are the underlying reason behind this solid growth, prompting organisations to shell out more to mitigate losses in the eventuality of an intrusion. Additionally, with increased security threats from terrorism the importance of protecting property and assets is paramount to all security strategies. Security exhibitors at IFSEC International 2016 According to a recent study by Marketsandmarkets the perimeter security market is expected to reach 13.18Bn by 2020 Another leading exhibitor to confirm their spot within the zone is Marshalls PLC, the UK’s leading hard landscaping manufacturer, specialising in intelligent street furniture. Marshalls will exhibit the latest products from its Protective Street Furniture ranges including PAS68 crash tested seating, planters, lighting along with post & rail systems. The enhanced Physical Perimeter Security Zone at IFSEC International 2016 will occupy over 1,000 square metres of dedicated floor space. In addition, the zone will now offer much more space to specialist manufacturers to fully display and demonstrate their products. All aspects of the sector will be covered including barriers, acoustic barriers, boom barriers, height restrictors, high security street furniture, blast protection, perimeter detection, blast walls, perimeter structures, bollards, protective bunkers, fencing, roadblockers, gate automation and turnstiles. Currently joining CAME BPT and Marshalls PLC within the zone are over 30 other companies including; Birmingham Barbed Tape, Blok n Mesh, DEA System, Engtex, GIlgen Doors, GM Techtronics, Kijlstra Precast, LPCB, Nitesite, Robust UK, Townscape Products, to name a few. IFSEC International will run from 21-23 June in 2016 and will once again be presented as part of UBM EMEA’s Protection & Management Series, the UK’s largest event dedicated to protecting and managing property, people and information. The series incorporates major events including IFSEC International along with FIREX International, Facilities Show, Safety & Health Expo and Service Management Expo. The series of events annually attract more than 40,000 attendees over three days to ExCeL London, in 2016 the series will run from 21 -23 June.

All-over-IP Expo brings together recognised global ICT and security brands to educate local sales partners and end-customers Meeting the right people and getting hands on with the newest technology are central to the All-over-IP Expo experience. With new exhibitors joining the show in Moscow in 2015, local sales partners and end-customers have even a better opportunity. Latest innovations to be showcased In 2015, the latest innovations in video surveillance, data storage, networks, identity management, access control, enterprise communications, IP intercom, building automation, and physical security showcased at All-over-IP Expo are enriched by 2N, Commend International GmbH, Seagate, BPT/CAME GROUP, ALL Connect Systems, ACESEE, Lex Computech, LTV, Iron Logic, SpaceCam, STRAZH, VARIFO, ASTERO, etc. Global ICT and security brands Celebrating its 8th year, All-over-IP Expo brings together recognised global ICT and security brands to educate local sales partners and end-customers on the technology that will enable them to succeed: 3CX, Abloy, Axis Communications, Avigilon, AxxonSoft, BAS-IP, Basler, Bosch Security, Dahua, Dallmeier, Fujinon, GeoVision, HID Global, Hikvision, Milestone Systems, MOBOTIX, Net GmbH, NUUO, Panasonic, QNAP, SALTO Systems, SIEMENS, SONY, Suprema, Synology, Tamron, Urmet, UTC Fire & Security, VIDEOTEC, VIVOTEK, Western Digital, etc. All-over-IP Expo 2015 is a networking platform for global IT, surveillance and security vendors, key local customers and sales partners where they share knowledge and exchange ideas that are financially rewarding for business. All-over-IP Expo brings together major brands to ensure the best marketplace for the latest technology and innovation, and to lead customers to the Next Big Thing.