US Edition
Security camera lens, CCTV Camera, Digital Recorder, Telemetric Transmitter and Controller, Intruder Alarm Control Panel, Access Control Reader, Dome Camera
Home  |  Settings  |  Marketing Options  |  eNewsletters  |  About Us  |  FAQs    Join on LinkedIn
Everything you need know

Network / IP - News

APT Security creates bespoke version of its Flex Bollard Range for Essex council

Published on 13 February, 2012
APT will shortly add a new Flex automatic rising bollard to its portfolio 
The flex range is ideally suited to lower risk scenarios
APT Security Systems, the high-end specialist security integrator, has created a bespoke version of its Flex Bollard Range to complement the existing bollards installed by Southend Council for various road safety applications.

The Essex council had been using another supplier for the bollard installed on pavements to protect kerbs, pedestrian crossings and car park entrances, but was obliged to find another provider when the product was discontinued. It asked APT Security Systems to adapt its Flex Bollards to a similar design to those already installed, as Adrian Watling, Road Safety Engineer at Southend Council explains:

"The Flex Bollard has many advantages," he says. "Should a vehicle come into collision with one, not only will the damage to the car be substantially less than with a hard fixed bollard, but the pavement should not be damaged."

The council has to date installed three quarters of the 100 bollards it has acquired and Adrian sees scope for the relationship with APT to continue for many years to come: "There seems to be an almost limitless number of applications for the Flex Bollard," he says. "We recently installed them on the entrance to a 20mph zone and feel that it is having the desired visual impact as a traffic calming measure and slowing the vehicles down."

Described as providing ‘boundary security with passive safety', the Flex range is ideally suited to lower risk scenarios, where the emphasis is on protecting more substantial barriers or curbs from significant damage. They are also ideally suited to denoting parking areas, pedestrianisation schemes and other similar zones where a perimeter needs to be clearly defined.

Chris Rowlands of APT Security Systems says that while the request from the Council was unusual, it was not unique: "We don't often get asked to design bollards to replicate another that has already been installed," he says, "but when using multiple bollards on one site, it is important not to compromise on the aesthetics.

"These bollards are being used in a variety of different scenarios and such is the versatility of the product that its potential uses are very wide reaching. We are pleased to be working with Southend Council on keeping motorists and pedestrians safer while using the roads,"
says Chris.

The Flex series comprises two static variants - Flex slim and Flex mid - offering bollards from 80mm to 180mm in diameter, and 680mm to 900mm in height. The series also includes the Flex telescopic range offering bollards with a diameter of 220mm and a height of up to 450mm. APT will shortly add a new Flex automatic rising bollard to its portfolio.
Bookmark and Share
Latest in
Network / IP Security Events

See privacy and cookie policy
Browsing from the Americas? Looking for US Edition?
View this content on US Edition, our dedicated portal for our Americas audience.
Do not show me this again
International EditionUS Edition