US Edition
Security camera lens, CCTV Camera, Digital Recorder, Telemetric Transmitter and Controller, Intruder Alarm Control Panel, Access Control Reader, Dome Camera
Home  |  Settings  |  Marketing Options  |  eNewsletters  |  About Us  |  FAQs    Join on LinkedIn
Detailed technical specifications of NVT NV-413A, one of over 57 Analogue Transmission from NVT
  • Technical spec

NVT NV-413A 4-channel passive transceiver

Contact companySaveSaveSend to a friendSend to a friend
Manufacturer: Network Video Technologies Network Video TechnologiesDownload DatasheetDownload Datasheet
NVT NV-413A CCTV transmission system
Model CodeNV-413A
Transmission typeUTP / CAT 5
Video Inputs4
Telemetry ControlYes
Pre & Post Alarm Image BufferYes
Video Outputs4
Transmission Range m1000
Physical SpecificationsWeight g: 340
Dimensions mm: 184 x 60 x 41
Environmental SpecificationsOperating Temp oC: -20 ~ +75
Model Info

The NVT Model NV-413A Video Transceivers are passive (non-amplified) device that allows the transmission of real-time monochrome or colour video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Supports screw-terminal or RJ45 UTP video inputs. Built-in transient protection. Supports "up-the-coax" type control signal up to 750 ft. Transmit up to 750 ft, 3000 ft with an active receiver.

Download Technical spec

See comparison of NVT NV-413A with similar NVT Analogue Transmission
Compare NVT NV-413A with Analogue Transmission from other manufacturers

Product News

Bookmark and Share

See privacy and cookie policy
Browsing from the Americas? Looking for US Edition?
View this content on US Edition, our dedicated portal for our Americas audience.
Do not show me this again
International EditionUS Edition