US Edition
Security camera lens, CCTV Camera, Digital Recorder, Telemetric Transmitter and Controller, Intruder Alarm Control Panel, Access Control Reader, Dome Camera
Home  |  Settings  |  Marketing Options  |  eNewsletters  |  About Us  |  FAQs    Join on LinkedIn
Detailed technical specifications of ComNet FVT/FVR280D8S1, one of over 113 Analogue Transmission from ComNet
  • Technical spec

ComNet FVT/FVR280D8S1 10 bit digitally encoded video transmission

The ComNet FVT/FVR280D8S1 analogue transmission, which exceeds all requirements for EIA RS-250C short-haul transmission and provides low video distortion, is a solution designed for high-performance CCTV system applications. Also, this 10 bit digitally encoded video transmission unit, with the Caltrans Specification for Traffic Signal Control Equipment and compliance with environmental requirements, is designed for use in unconditioned roadside or out-of-plant installations. Moreover, the ComNet FVT/FVR280D8S1 provides protection from voltage transient events and power surges, as its power and signal input/output lines have voltage transient protection. With bi-colour LED indicators, the users can confirm the status of this 10 bit digitally encoded video transmission unit’s critical operating parameters.
Contact companySaveSaveSend to a friendSend to a friend
Manufacturer: ComNet Europe Ltd. ComNet Europe Ltd.Download DatasheetDownload Datasheet
ComNet FVT/FVR280D8S1 CCTV transmission system
Model CodeFVT/FVR280D8S1
Transmission typeFibre Optic
Video Inputs28
Video Outputs28
Number of Fibres1
Signal ModePAL / NTSC
Bandwidth MHz10 Hz ~ 6.5 MHz per channel
Network PropertiesImage Colour: Colour
Bit rate Bps: 10
Physical SpecificationsWeight g: 3,600
Dimensions mm: 480 x 190 x 150
Electrical SpecificationsPower Consumption: 70 W
Voltage: 90 ~ 264 V AC
Environmental SpecificationsOperating Temp oC: -40 ~ +75 C (-40 ~ +167 F)
Operating Humidity %: 0 ~ 95
Model InfoComNet FVT/FVR280D8S1 10 bit digitally encoded video transmission transmits 28 real-time / full frame colour video signals and 8 bi-directional data signal over one optical fibre. The unit exceeds the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit is ideal for use in unconditioned roadside or out-of-plant installations. FVT/FVR280D8S1 is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.

Download Technical spec

Compare ComNet FVT/FVR280D8S1 with Analogue Transmission from other manufacturers

Product News

Bookmark and Share

See privacy and cookie policy
Browsing from the Americas? Looking for US Edition?
View this content on US Edition, our dedicated portal for our Americas audience.
Do not show me this again
International EditionUS Edition