| | Brand | Pelco | | Model Code | DX2008-320 | | Series | DX2000 Series | | Recording Mode | Timelapse / Event | | Video Inputs | 8 | | Inbuilt Multiplexer | Multiplexer | | Multiplexer Type | Duplex | | Storage Capacity GB | 320 | | Storage Rate (fps) | 16 | | Compression Type | Wavelet | | Recording System | HDD | | Resolution | 720 x 240 | | No of Video Inputs/ Ouputs | 8 in, 1 out | | Signal Mode | PAL / NTSC | | Video Outputs | 1 | | Network Type | TCP/IP, PSTN | | IP Ready | PTZ | | Physical Specifications | Dimensions mm: 140 x 483 x 498
Weight kg: 12.7 kg
| | Electrical Specifications | Power Consumption: 200
| | Environmental Specifications | Operating Temp oC: 5 ~ 40
Operating Humidity %: 80%
| | Model Info | The DX2000 Series DVR can record video based on scheduled settings in continuous, motion detection, or alarm modes. It can also be connected to a maximum of 16 serial devices such as cash registers or ATMs for recording data along with the video. Since most applications do not require local, labor-intensive supervision, the DX2000 Series DVR was engineered for complete remote operation utilizing TCP/IP network (LAN/WAN/Internet) or PSTN phone line connections. The system is operated or programmed (depending on password level) through the Web browser interface installed on your PC. The PC can be positioned in close proximity to the DX2000 or located halfway around the world. |
|
