US Edition
Security camera lens, CCTV Camera, Digital Recorder, Telemetric Transmitter and Controller, Intruder Alarm Control Panel, Access Control Reader, Dome Camera
Home  |  Settings  |  Marketing Options  |  eNewsletters  |  About Us  |  FAQs    Join on LinkedIn
Detailed technical specifications of SALTO WRADAPT, one of over 19 Access control readers from SALTO
  • Technical spec

SALTO WRADAPT access control reader accessory with dip switches configuration to interface with the external device

Contact companySaveSaveSend to a friendSend to a friend
Manufacturer: SALTO Systems SALTO Systems
SALTO WRADAPT Access control reader
AccessoriesReader Adaptor
Model InfoWith the SALTO Wall Reader Adaptor, it's possible to integrate with third party devices such as time and attendance, POS etc. The Wall Reader Adaptor is designed to read data from the RW carriers and send this to an external device. It is connected on one side to any SALTO Wall Reader, and on the other side to the external device. The interface with the external device can be RS232, OMRON and WIEGAND. Configuration by dip switches to control data to be read and the interface with the external device. Voltage required: from 7 to 15V from the external device. Can also be optionally powered through the jack connector. Connection to the reader: UTP CAT5 cable. Connection to the external device: 4 pins block terminal. Data read by the WRADAPT: ROM CODE, TRACKS ON KEY, WIEGAND CODE.

Download Technical spec

Product News

Bookmark and Share
Related tags

See privacy and cookie policy
Browsing from the Americas? Looking for US Edition?
View this content on US Edition, our dedicated portal for our Americas audience.
Do not show me this again
International EditionUS Edition