Mx2wire+ makes any house multimedia-compatible quickly and cost-effectively with no need to lay new cables

In many houses television, telephone and other distribution networks based on two-wire cables are already installed, but no longer used. For example, a previously cable-bound telephone system may have been replaced by an up-to-date wireless system. Existing, unused cables can now be quickly connected to Mx2wire+ and transformed into network connections throughout an entire building.

An old analog camera can also be instantly exchanged for a digital, high-resolution MOBOTIX network camera without the need for any recabling and with all the associated benefits.

Ethernet & PoE via two-wire cable.

Using the Mx2wire+ system from MOBOTIX, an Ethernet network with PoE can be established using existing cables up to 500 m. This means that you can utilize a two-wire cable that is no longer in use (analog telephone line, antenna cable or bell wire, for instance) to connect a 10/100 Mbps Ethernet device such as a PC, WLAN, IP camera, IP telephone or IP door station without having to lay any new cables or implement any other constructional measures. An (identical) Mx2wire+ unit is required at both ends of the cable, and it automatically configures itself as either the sender or the receiver (MOBOTIX patent).

The significant additional benefit of Mx2wire+ is that, in addition to data, the power to operate PoE end devices (Power over Ethernet according to the IEEE 802.3af standard, a MOBOTIX network camera, for example) can also be transferred via the two-wire cable.

Mx2wire+ is supplied via PoE from the network cable that feeds in. The connected end devices are supplied with up to 7 watts via PoE. Mx2wire+ does not therefore require its own power supply, as the network distributor (switch) typically supplies power over the data cables (PoE) so that the two Mx2wire+ units as well as the standard PoE end device are supplied.

Mx2wire+ is delivered in a standard socket frame in different designs, however, it can also be used with the surface-mounted socket provided.

New possibilities, more convenience – with Mx2wire+

• Ethernet and PoE data transfer using a two-wire cable
• Simple connection of 10/100 Mbps Ethernet devices
• No need for expensive and time-consuming installation of network cables
• Ideal for connecting PCs, WLAN DSL routers, IP cameras, IP telephones and IP door stations
• Connected devices are supplied with up to 13 watts via PoE
• Perfect when wireless communication is not possible (due to distance, thickness of walls, etc.)
• Maximum data transfer range of 500 m and data rate of up to 50 Mbps (depending on distance)
• Simple installation in standard sockets (surface- or flush-mounted)
• Developed, produced and patented by MOBOTIX Germany
• Two LEDs display current connection and supply statuses
• Network extension by connecting a Cat7 cable of up to 500 m in length as a two-wire cable